Refrigerated compressed air dryer Refrigerated dryer

BEGA Kältetrockner Drucklufttrockner 21m3 / min (2951)

Condition: not inspected (used), Year of construction: 1984, Turning length max. 1200 mm turning Ø max. 250 mm 2 hydraulic scanning supports spindle motor 5,5 kW Prodpfx Ahep Dt Twe Usf hydraulic motor 2,2 kW

Year of construction: 1978, condition: good (used), Weinig U 17N 7-head four side planer Planing width mm 170 Planing height mm 120 Number of spindles 7 Spindle arrangement down/left/right/up/down/universal Electric height adjustment Feed rate from 6.5 to 45 m/min Prodeg Sa R Djpfx Ah Uef Drive of feed rollers cardan 11 Top pulling rollers

Year of construction: 2003, condition: ready for operation (used), functionality: fully functional, Drying chamber Make: Mühlböck Type: ZLSM Year of construction: 2003 Internal dimensions approx. 7400 x 4500 x 4250 mm (LxWxH) 3 fans each 3 kW 10 measuring points With frequency converter With control system Prsdpewr Tzfofx Ah Uef Heating power 223 kW Water temperature 85 °C Water quantity 14 m³/h Voltage 230/400 Volt Connected load 12 kW Fans 3 x 3 kW Control program MB Intellevent 5000

Condition: used, Weinig brand moulder, model PFA17N, grooved table, 8 shafts (lower 4kw, right 4kw, left 5.5kw, right 4kw, upper 5kw, lower 4kw, universal 4kw, universal 4kw), used. Prjdpfx Aek N I I Njh Uef

Year of construction: 2020, condition: new, ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual.The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out. The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore. Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction.The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore. ROMER cabins are equipped with 4 "color touch screen.The cab operation is intuitive, takes place in 3 modes, automatic (time), automatic (based on a clogged filter sensor), or manual. Filter clogging sensor The cabins are fitted with a sensor that queues filters for cleaning when they plug. The system also informs when the filters have already worn out Automatic filter cleaning The electronic system of automatic filter cleaning has a range of adjustment of cleaning frequency and time of firing. Each filter is cleaned separately, and the filters can also be cleaned manually using the buttons. We know from experience that it is difficult for the operator to enforce filter cleaning. Thanks to this system, the operator will not have to think about it anymore.Low volume Aluminum fans are very quiet, work at 74-79dB - It's not much. it is difficult to talk even with a standard cabin construction. Broach through the cabin The cabin, by pulling the sling beams inside the cab, improves the work efficiency, thus relieving the painter, who does not have to move them by hand anymore.Automatic filter cleansing ROMER's cabins are equipped with an electronic automatic filter cleaning system. Booth has an adjusted range of cleaning interval, time of the impulse. Each filter can be cleaned individually by using control buttons. We know from experience that it's hard to expect from an operator to clean every single filter entirely. Thanks to this system operator won't have to worry about it anymore. Booth drive-through chain Thanks to installed drive-through chain there is no need for an operator to drag every element into the booth himself.Elements drive through the booth all on their own which improves the efficiency and allows operator to focus just on the painting part.Regulated air suction Pjdpfxoflk Akj Ah Uorf In our booths we install an anti-static plate that covers filters. It protects filters from a first wave of a powder. In a well designed booth it also improves the velocity of air moving across the painted element that reaches filters. It improves suction and makes painting easier.

Condition: like new (used), Used Weining Unimat PFA22N, ready for inspection and immediate sale :). Technical specifications Year of manufacture 1972 Working width mm 220 Planing height mm 120 Number of spindles 5 Pedpfxohmuhij Ah Uorf Spindle configuration b-r-l-t-b Spindle rotation speed max 1/min 6000 Infeed table length mm 2500 Feedrate max m/min 36 Type of feed roller drive Chain Further technical details Bottom spindles 2 Right spindles 1 Left spindles 1 Top spindles top 1 Spindle diameter mm 40 Seperate motor per spindle Lubrication pump manually Pneumatic top pressure Continuously variable feed Total power, kW 32

Condition: good (used), Four-sided planer WEINIG type U17N 8 spindles Working width up to 170 mm Prsdjupkc Espfx Ah Usf Working height up to 120 mm feed infinitely variable 6-36 m/min

Condition: used, 2 fans: 2/ 0.75KW Compressor: 5KW Water heater: 9KW Refrigerant: R134A-3.8kg Tension: 380V Congestion: 110cm/80cm/H185cm Weight: +-500kg Voltage: 380V Predpsm H Utfefx Ah Ujf 6900 € Reference: Wood dryer with dehumidification system

Year of construction: 1998, condition: ready for operation (used), functionality: fully functional, Vanicek drying chamber with post rack trolley with in- and out-swing gates with control system and electrical control cabinet Dimensions: internal length 13.05 m, width 4.00 m, height 2.80 m Fan VMR 71-05-4, E-motor 1.1 kW/400V Dehumidification Ø 50, with actuator Dehumidification Ø 40, with actuator UGL sensors, humidification, heating valve (to be provided by client) Prsdpfx Aewxdqkoh Uof Switchgear, heating coil, fan frame Stacking dimensions 1x12.5 m, 2x1.2 m, 2x1.0 m

Condition: used, LATHE FOR TABLE LEGS GENINI MOG. G300 - Max.turning diam. 300 mm. - Max. Turning lenght mm. 800 Pjdomzbp Eopfx Ah Uorf - N. 4 carriages