Mass spectrometer

BioMérieux VITEK MS 410895 Mass Spectrometer

Year of construction: 2018, operating hours: 100 h, condition: as good as new (ex-display), Klieverik laminating calender with few operating hours. Approx. 100h. The machine can be inspected on site. Condition as new. The machine has never been in serial production. Sale from place. Bjdpfx Aohd N Daol Uedg

Condition: excellent (used), Year of construction: 2022, Two UV-LED roll-to-roll EFI Pro 32r+ for sale Year of installation: January 5, 2022 and August 15, 2022 Printers are in very good condition and ready for production Main technical information: Bodpfx Alsx Aibyo Uodg Printing width: 3200 mm Printing speed up to 256 sqm per hour 8 printheads Droplet size: 7 pL Color configuration: 2 x CMYK (no white)

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, CLEANROOM - ISO 8 | Cleanroom requirements ISO Class 8 | ISO Cleanroom Class 8 | Cleanroom classification. In order to achieve an ISO 8 air purity class in a Cleanroom, several levels of air filtration are usually used (e.g. G4 pre-filter, F9 filter, H13 final filter). Air movement in the room is non-unidirectional (there is a mixing of "clean" air supplied to the room with "dirty" air present in the room). Air vents in the ISO 8 room are placed on the walls. The required number of air exchanges per hour will depend on the nature of the activities conducted in the room and the number of personnel present, but the goal could be to provide 10-40 air exchanges/hr. In ISO Class 8, personnel are often present continuously. Employees may be dressed in standard work attire and visitors in a disposable apron. It is recommended to maintain a minimum overpressure of the room relative to the adjacent zone of 5-10 Pa. Bdjdpfsq H H Ruex Al Usg Requirements for equipment and materials intended for Clean Room with ISO air cleanliness class 8 (maximum average amount of particles released when: number of samples taken = 100; measurement performed in accordance with ISO 14644-14 in a cleanliness class at least one better than the purpose of the device; number of particles/m3) Detailed description in photos. Technical drawings attached to photos. Description of ventilation The purpose of the ventilation installation performed was to achieve the following air parameters in the Clean Room. The installation was made with the GBD PHARMA 2000 system, meeting all the requirements for 'clean rooms' in the highest classes of air purity. Parameters for the installation: a. Air purity - ISO 8. b. Temperature 19-23 st C c. Humidity max 38%. a. To ensure the required purity of the supplied air, an air handling unit manufactured by DOSPEL with a maximum capacity of V= 3500 m3/h [up to 15 air changes per hour] was used. The air handling unit is equipped with pocket filters : pre-filters FK EU5/EC2 and fine filters FK-EU9/EC2. In addition, HEPA 11 filters made by EUFILTER were used in diffusers located in the ceiling. Data sheets in point H6. As a result , with a measured flow rate of 3264 m3/h, an ISO 7 [class "C"] cleanliness class of the room was obtained in the resting state, and thus an ISO 8 [class "D" ] cleanliness class for the working state. b. The temperature range of 19-23 deg C is for the enlarged cooler and chiller to be freely maintained with 25% fresh air. c. In order to achieve in summer conditions with high temperatures of 30 deg C and humidity of 80%, a freon chiller of 31.4 kW and a chiller of 33.5 kW of cooling power were used. The chiller is made by FUJITSU supplied by Klimatherm Gdansk. The room is automatically regulated overpressure in relation to the external pressure - the pressure difference at the door : 15 Pa The automation of ventilation allows for "economical" mode , in which the installation works in a closed circuit and an overpressure of 15 Pa is maintained. Technical data attached to the photos.

Condition: excellent (used), Item: D-10800-BacTerminator BacTerminator BTM10FD11001 Water Disinfection Equipment Inclusive pumps, Control and other accessories. Bodpoh Dxqvsfx Al Uodg Nice condition

Condition: like new (used), Year of construction: 2019, clamping force: 1,000 kN, Equipment: documentation/manual, Clamping force: 100 t Screw diameter: 32 mm Shot volume: 103 cm3 Type: Horizontal Drive: Electric FANUC Roboshot α-S100iA : Basic Technical Specifications Bdjdezktkzepfx Al Ueg Mechanism: Double toggle Clamping force: 1000 kN / 100 tonf _(opt. 1250 kN / 125 tonf)_ Die height double platen: 150–450 mm _(opt. 150–550 mm)_ Die height single platen: 220–520 mm _(opt. 220–620 mm)_ Clamping stroke: 350 mm Locating ring: Ø 125 mm Tie bar spacing (H×V): 460 × 410 mm Platen size (H×V): 660 × 610 mm Min. mould size (H×V): 265 × 240 mm Ejector stroke: 100 mm Max. ejector force: 25 kN / 2.5 tonf _(opt. 60 kN / 6.0 tonf)_ 1. Clamping force: 1000 kN 2. Injection speed: 200 mm/s 3. Max. injection pressure: 2200 bar 4. Min./Max. mold height: 150 mm / 620 mm (extended) 5. Clamping stroke: 350 mm 6. Tie bar spacing: 460 × 410 mm 7. Ejector stroke: 100 mm 8. Screw diameter: 32 mm (103 cm³) 9. Screw/barrel: W/C (hardened, high wear and corrosion resistance, up to 350 °C, 30% GF) 10. Nozzle: Standard open R19D4 Control & Software (FANUC 31i-B CNC) 1. 15" LCD touchscreen 2. SI unit (kN, MPa...) 3. Password-protected screen lock 4. AI pressure profile trace function 5. AI metering control function 6. AI mold protection function 7. AI ejector protection function 8. Backflow monitor function 9. Precise metering 2, 3 10. Auto purge function 11. Extruder delay timer function 12. High precision V-P switch function 13. Injection unit temperature control and display 14. Automatic mold height adjustment 15. 2-stage ejection 16. Ejector delay function 17. Pre-ejection function 18. Optimal energy consumption function Standard Machine Equipment 1. Extended mold height 2. 4-circuit rotameter 3. Automatic mold height adjustment 4. Hopper slider 5. 3-color LED signal lamp 6. Automatic purge and material cleaning function 7. Plasticizing speed control 8. Decompression control additional function 9. Backflow monitoring function 10. AI mold and ejector protection 11. Mold protection output on moving platen 12. Energy consumption measurement function 13. Robot interface (Euromap 67) 14. Auto stop/shutdown mode 15. 3 independent air valves 16. 8 digital outputs, 11 digital inputs 17. Pre-injection / injection compression function 18. Cascade injection valve control (up to 8 valves) 19. USB and memory card output 20. Tool kit (standard tools + grease gun) 21. User manual (Hungarian) 22. Warning labels (Hungarian)

Condition: used, This listing is for the This listing is for the Bruker microflex mass spectrometer The unit is in full working condition and is ready for immediate use The Bruker Microflex is a Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer (MALDI-TOF MS), primarily used for rapid identification of microorganisms, biomolecules (like proteins and peptides), and polymers. It is part of Bruker’s MALDI Biotyper series Key Components: Laser Source: Nitrogen or solid-state laser (commonly 337 nm UV) Ion Source: Vacuum chamber with MALDI target plate Bdsdpoxhdxqsfx Al Ujg Flight Tube: Measures time-of-flight of ions Detector: Converts ion arrival times into a mass spectrum MALDI Target Plate: Metal plate for spotting samples mixed with matrix How It Works (Simplified): Sample Prep: Mix analyte with a MALDI matrix (e.g., α-cyano-4-hydroxycinnamic acid). Laser Ionization: Laser hits the matrix, causing it to ionize the sample. Ion Acceleration: Ions accelerated into TOF analyzer. Detection: Time-of-flight is measured; smaller ions reach the detector faster. Spectrum: Mass/charge ratio (m/z) plotted vs intensity. Physical Specs (Approximate): Footprint: Desktop size (about 80 cm width) Weight: ~100–120 kg (varies by model/version) Power: Standard lab electrical supply Environment: Requires clean, stable temp/humidity condition

Year of construction: 2019, condition: used, 2-vessel brewhouse with stainless steel brewing vessels, mounted on a brewing block. The brewing block consists of the following components: 1. Mash and wort kettle, steam-heated (bottom heating zone with perforated weld + internal boiler), insulated, with a gross volume of 15 hl. The kettle is equipped with a continuously adjustable, top-driven agitator. The boiling vapours are extracted by a kettle fan into a vapour condensation pipe fitted with Lechler nozzles. The kettle also features a CIP spray head and a digital thermometer. 2. Mashing and lauter tun, insulated, with a continuously adjustable rake, inlets and outlets for wort and thick mash, spent grain flap, lauter floor (designed as a slotted screen floor), mash/wort pump and digital thermometer. Cleaning nozzles are fitted for internal cleaning and rinsing. For hot trub separation, the vessel also features a tangentially fed whirlpool nozzle. 3. Control cabinet with control panel 4. Various pipework, valves and sensors. The system is equipped with a two-stage plate heat exchanger for wort cooling at 1,000 l/h and a wort aeration device. In addition, a 20-hectolitre insulated stainless-steel tank with a heating jacket and a booster pump is available for use as a hot-water storage tank. Additional title: brewing block with stainless steel brew vessels Mash and wort pan net capacity approx.: 1000 L hot wort Mash and wort kettle inner diameter approx.: 1000 mm Bjdpfxsztwz As Al Ujdg Mash and lauter tun inner diameter approx.: 1250 mm Height up to hood door approx.: 1 m Power: 4 kW Voltage: 400 V Frequency: 50 Hz Operation / Control: “Braupilot” HMI control via touch screen Material: Stainless steel 1.4301 Base construction: Thanks to its modular design, the entire brewhouse is very compact and can be integrated individually and space-savingly into the guest area. Features: Mash and wort kettle with bottom heating and internal cooker, mash and lauter tun with whirlpool nozzle (combination vessel), hot water tank, wort cooling, wort areation, fittings, pumps, pipes

Condition: ready for operation (used), Year of construction: 2018, Inlet medium: AP water, outlet medium: distillate, distillate outlet temperature: approx. 99°C, tank volume: 900l, number of preheaters/evaporator columns: 3/4, distillate production: 300l/h, pure steam production: approx. 70kg/h, operating modes: distillate production/pure steam production/WFI loop system sterilization, controls: Siemens SPS S7-300. The distillation unit was designed as part of an overall system but has its own control and automation and can be operated separately. Documentation available. An on-site inspection is possible. Bodpfx Asygmcdel Usdg

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: STERIVAP 6612, For sale is a BMT STERIVAP 6612 steam sterilizer from an ongoing food production facility. The autoclave was originally developed for medical applications and is currently used successfully for sterilizing beverage bottles. Up to 350 bottles are processed per sterilization cycle on specially adapted transport carts. Bjdjzccunspfx Al Ujdg The unit features integrated steam generation, a modern Siemens control system with a touchscreen, and programmable sterilization cycles with stored programs for temperatures above 121 °C. The system is in very good technical condition. Heating elements have been replaced, wear parts have been regularly exchanged, and all maintenance has been performed on an ongoing basis. The autoclave is currently in daily operation and can be inspected under production conditions until August 2026. Further details: Usable volume: 610 liters Pass-through design Integrated steam generation Siemens control system with color touchscreen Display currently set to Polish, other languages possible Programmable sterilization cycles Stored programs > 121 °C Heating elements replaced Regular maintenance Wear parts regularly replaced 1 transport cart included Additional transport carts available Currently used in a food processing facility Inspection possible during ongoing operation Available from 01.09.2026 Location: 58-508 Siedlęcin, Poland Price: €24,900 (negotiable).

Condition: excellent (used), Year of construction: 1999, Engel ES 4450/600HL Clamping force 600 t Year of manufacture 1999 Bedpfx Aexxcyusl Uodg Screw diameter 90 mm PVC cylinder with additional screw For PP, PE, etc. Injection volume 2480 cm³ Clamping plate size (horiz./vert.): 1480x1300 mm Minimum mold installation height 500 mm