Hydraulics - power unit

Birrer Hydraulik Aggregat

Year of construction: 2022, operating hours: 10 h, condition: new, Universal testing machine H5TMC mechanical construction: according to DIN EN ISO 7500-1) Iajdsiq Hw Ujpfx Aadon 2 backlash-free ball screws, drive via AC servo motor, Fmax = 5 kN, stiffness 10 kN/mm 1 working area up to nominal load: working chamber width: 420 mm (optional extensions: +190mm / +330mm / +620mm) max. test stroke without test tools, adapters and KMZ: 1025 mm (optional extensions: +250mm / +500mm) Optional: conversion to floor model, required additional assembly: substructure table Travel speeds: Test speed 0.001 - 2000 mm/min at full load Return speed 2000 mm/min Force measurement: Measuring range: in the range 0.4 - 100 % of the nominal load class 1 (optionally class 0.5) (+/- 1 % of the displayed value according to DIN EN ISO 7500-1) Resolution of force measurement: +/-180,000 digits at 20ms integration time The machine is delivered with a factory test certificate. If, at the customer's request, a factory or DKD calibration is to be carried out at the installation site, this expense must be invoiced separately. Crosshead travel measurement: Incremental rectangular input with encoder monitoring, storage of crosshead position. Resolution of the crosshead travel measurement:

Condition: new, Cutting range: round 0°: 170 mm square 0°: 150 x 150 mm flat 0°: 150 x 190 mm round 45°: 125 mm square 45°: 95 x 120 mm working height : 870 mm cutting speeds : 40 / 80 m/min saw band: 2080 x 20 x 0,9 mm coolant pump: 100 W saw motor: 0,75 kW connection: 400 V dimensions L x W x H, approx.: 1340 x 810 x 1320 mm Weight, approx.: 146 kg Features: - Saw bow can be tilted up to 45°. - With 2 saw blade speeds for optimum adaptation to the workpiece - Ideal for cutting tubes, profile material as well as solid material made of VA, iron, etc. - Generously dimensioned saw arm for low-vibration work - Lowering of the saw arm via hydraulic lowering cylinder - Low noise level due to stable design - Switch-off after end of cut by micro limit switch - Quick-action vice for simple and fast workpiece clamping - Precise, adjustable saw blade guide for optimum cutting results - Coolant system with pump - Incl. base frame - CE/IEC, German documentation and German service Scope of delivery: - BiMetal saw band 2080 x 20 x 0.9 mm, 6/10 ZpZ - Band tension adjustable via manometer - quick clamping vice - material stop - Coolant device with pump Iodpsilk H Tofx Aadean - Hydraulic lowering cylinder - Motor protection switch - Automatic limit stop after end of cut - underframe

Condition: new, functionality: fully functional, Year of construction: 2026, The CIDAN MEGAPRO folding machine is the strongest member of the product family. The solid and stable construction makes it possible to bend 6 mm steel (5 mm at 4100 mm) or 4 mm stainless steel (3.2 mm at 4100 mm) over the entire working length (at a working length of 3,100 mm). The MEGAPRO has many intelligent functions as standard, such as automatic adjustment of the sheet thickness, automatic adjustment of the bending angle and CNC crowning in the table. It also has a pneumatic tool clamping system. We also offer various backgauge lengths. Iodpfx Astvl Sgjadsan The most important advantages: - For high speed and precision, the upper and bending beam are equipped with double-driven servomotors. - CNC-controlled sheet thickness adjustment, bending center and crowning. - Optionally pointed or goat foot rail (up to 150 mm) can be used - The upper beam achieves a clamping pressure of up to 60 tons. Performance: 6 mm at 400 N/mm² (5 mm at a working length of 4100) 5 mm at 600 N/mm² (3.2 mm at a working length of 4100) 9 mm at 200 N/mm² (7.5 mm at a working length of 4100)

Condition: as good as new (ex-display), Year of construction: 2020, For sale is a GENERATOR LSA 46.2 M5 4p from the manufacturer Leroy Somer. It is a new generator that is no longer needed. Price: 6000€ net Sale exclusively to traders under explicit exclusion of warranty and liability for material defects. Ijdpfx Aash Ryanedjan

Condition: good (used), Ring bending machine, profile bending machine, bending machine, pipe bending tool, pipe bender, pipe bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine Isdpfxoh S Ti Eo Aadsan -Accessories: see photos -Tool: Currently available tools are designed for box profiles -Overall dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: new, Year of construction: 2026, CORMAK HBS275 band saw, equipped with a hydraulic cylinder, a cooling system and an arm swivelling up to 60º, together with blades from renowned German company Röntgen, is used commonly in ironworking, where precision, quality and cutting speed are essential. Horizontal band saw with a swivelling arm for cutting metals, allows for cutting in plane perpendicular to the axis of material cut and at any angle from 0 to 60º. Material for cutting can be fed manually or with any mechanical feeding device, with automatic tool feed. Band guides are equipped with dedicated carbide plates and bearings. This has a huge impact on band guiding, its durability, cut straightness, cutting accuracy and quality. Carbide guiding drastically reduces the wear of the machine and blades. Machine's arm made of uniform cast iron as well as a 27 mm wide cutting band are capable of low and high quantity cutting of profiles and other materials. The vice is located in an adjustable bed, equipped with a quick clamp. Blade guides have cemented carbide plates and roller bearings. Its these cemented carbide guides that provide cut precision and straightness. The arm, positioned at an angle of 25º, thus increasing blade durability, is equipped with an automatic blade tension sensor. To the bottom of the arm a brush wire is attached, ensuring clean and functional brush. Machine's drive is transmitted through a worm drive. A 3-phase motor with 2 cutting speeds and motor thermal protection. This cutting machine also has a strain gauge - a band tension sensor and an automatic switch-off in case the cutting band breaks. Upper part of the base constitutes a tank for flood coolant draining and chips produced during cutting. A cast iron workbench is attached to the base, with a swivel arm and control panel on separate arm. The main cutting move in the cutting process is moving the cutting band and the arm lowering feed. The arm lowering speed (the cutting speed) is adjusted with the hydraulic cylinder. The feed speed is controlled by the control panel. There are 2 cutting band speeds to choose from: 37.5 and 75 m/min. In rest arm position (after the cutting process) the cutting band drive is switched off automatically. Safety is ensured with cutting band guards and microswitches stopping the motor after cutting cycle is finished or after any of the guards are opened; additional protection consists of automatic switch-off of the band saw in case the cutting band breaks. Technical data Total power 1.5 kW Power supply 400V 50Hz Arm lowering control hydraulic cylinder Band dimensions 2455 x 27 x 0.9 mm Band speed 37.5/75 m/min Vice base height 900 mm Weight 215 kg Angle 0º Iasdpfxjudi Uno Aadon ø220 260 x 140 200 x 200 45º R ø160 160 x 140 160 x 160 60º R ø100 120 x 100 100 x 100

Condition: used, MULLER 250t PRESSURE: 250t STROKE: 550mm Iajdpfx Asrfxhksaden TABLE DIMENSIONS: 2500x1400mm

Condition: new, Year of construction: 2025, machine/vehicle number: 526969342, Gasparin jaw crusher GI129CV Everest mobile jaw crusher on crawler track 55 ton machine with extremely robust crusher and exceedingly high potential. It is characterized by the robust construction in all its parts and is certainly the best answer to the most heaviest applications. Equipped with Grizzly vibratory feeder (GI129C) it is suitable for more traditional applications, with Vibratory feeder and pre-screen, on the other hand, the machine (GI129CV) is suitable for arduous operations with high fines content and high material moisture. Equipped as standard with the patented HCS system (Hydraulic Crushing System), EVEREST is the best answer to quarry requirements. Production capacity: approx. 430 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction of fuel consumption by approx. 30%. Gap hydraulically adjustable even during crushing operation fast blocking system with wedges and folding cylinders dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from start of operation of the plant Technical data: Jaw crusher 1150 x 850 mm crushing gap from 75 to 200 mm Iajdpfohd I Siox Aadon feed hopper 7 m³ - 2850 x 4960 mm two-deck vibrating screen 1170 x 2000 mm Main conveyor belt 1100 x 10000 mm 4 cylinder constant speed diesel engine 82 HP/60 KW , exhaust gas stage V Control panel chain drive 500 x 3900 mm Weight: kg transport length 12950 mm Transport width:3000 mm Transport height 3400 mm More information Purpose: construction, General condition: very good, Technical condition: very good, Visual condition: very good,

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Table size: 1120 x 280 mm T-slots in table: 3 x 16 mm Table longitudinal travel: 600 mm Table transverse travel: 250 mm Vertical travel: 360 mm Spindle rotation: +/-45° Distance between table surface and spindle face: 230–630 mm Maximum spindle speed (vertical): 108–2400 rpm Maximum spindle speed (horizontal): 90–2000 rpm Spindle taper: ISO 40 Spindle stroke: 120 mm Power: 2.2/2.2 kW (vertical/horizontal spindle) Dimensions: 1700 x 1450 x 2245 mm (W x D x H) Weight: approx. 1350 kg Accessories, features: Iasdeybb T Hopfx Aadjn - 3-axis SINO digital read our system - spindle feedrate in three steps - 200 mm machine vice - 45° tiltable spindle head - Rotating console - Rotating machine table - 2 x reducers (ISO40/MK3, ISO40/MK2) - Drill head with collet, diameter 3 – 16 mm - 2 horizontal milling spindles - 1 x 15-piece chuck set, diameter 2 – 20 mm - Clamping set - Work light - Cooling water system

Condition: ready for operation (used), machine/vehicle number: YC-67958, max. operating pressure: 210 bar drive motor: 380 V, 11/13.2 kW oil tank: 500 x 900 x 600 mm high Iaedpfed Efdysx Aadon oil tank capacity: 250 l space requirement: 1150 x 700 x 1070 mm high