Compressor and compressed air treatment

BOGE Modell D75 Typ 415

Condition: new, Year of construction: 2025, DPF MASTER FLASH STANDARD ™ is a compact device for regenerating diesel particulate filters (DPFs) using a hydrodynamic method. It features a 150-liter tank, a pump with a capacity of up to 133 L/min, and a built-in filtration system. The cleaning process operates in an automatic cycle, restoring 99% of the filter's factory parameters. The device comes with adapters that enable the connection of all DPF filters from passenger cars. To enhance the efficiency of the regeneration process, we recommend purchasing the dedicated DPF Heater Pro+ drying system at a promotional price. TECHNICAL DATA: - Weight: 200 kg - External chamber dimensions (cm): 150 x 80 x 131 - Fluid tank: 150 liters - Operating pressure: 3 bar - Power supply: 3 x 400 V - Maximum power: 6 kW - Frequency: 50 Hz - Fluid temperature adjustable between 30°C and 100°C - Pump capacity: up to 133 L/min - Fluid filtration: 5 - 100 microns - Safety features: temperature sensor, fluid level sensor, emergency safety switch - Declaration of conformity: CE EQUIPMENT: - Fluid level sensor - Temperature sensor - Programmable temperature regulator Knodpfx Asgllxgjh Ujf - Programmable controller for automatic cycle operation - 150-liter water tank - Water pump with a capacity of up to 133 L/min - Built-in pressure reducer (0-8 bar) - Built-in filtration system - Adapters for DPF filters With the purchase of our machine, you will receive a starter kit to help you start operating at full capacity. The kit includes: - A set of 3 filter cartridges + 3 replacements - XPOWER DPF Cleaner chemical package (2 x 1 L)

Year of construction: 1983, condition: refurbished (used), Baader 185 file + skin machine for whitefish is suitable for large & medium-sized cod, Haddock, Gråsej, Merluza etc. Capacity 24-32 fish / minute, Kjdjifpz Ijpfx Ah Uonf Year mod 1983. Dimensions 690 x 185 cm H 180 cm.

Condition: good (used), Item: D-8042-Metal Cheese moulds Stainless Steel Trolley with cheese moulds Havarti Cheese moulds for cheese Havarti, Feta etc., Stainless Steel, dim. 120 mm x 300 mm. x 200 mm. Knodpfx Aeihh Sljh Usf Complete 48 moulds with Cheese Trolley on Wheels! Dimension of Trolley: L 2200 x 1040 x H900 mm

Condition: good (used), • Baader 175 filetmachine for flatfish. Kedpfjd Ixw Hox Ah Usnf • Kapacity : 40 pcs./min. • Water consumption : approx 15 L/min.

Condition: new, Year of construction: 2025, DPF HEATER PRO PLUS™ is a device designed for drying all types of diesel particulate filters (DPFs) and catalytic converters, made entirely of stainless steel AISI 304 and acid-resistant steel AISI 316. It is equipped with an integrated measurement system and a drying system that operates at temperatures up to 130°C using a side-channel turbine. A built-in thermal printer allows for printing contamination measurements of the filter both before and after regeneration. This device is an excellent additional option for DPF cleaning machines that do not have an integrated drying system. BENEFITS OF USING THE DPF HEATER PRO: - Operates independently of the regeneration machine - Optimizes the filter regeneration process - Low drying costs - Contamination measurement system – test results confirmed with a printout - Quick filter clamping system – Camlock - Adapters for passenger cars and trucks - Full automation of the drying process Kedpfx Ahjglpywj Uenf TECHNICAL PARAMETERS: - Weight: 100 kg - External dimensions (L x W x H): 92 x 51 x 114 cm - Voltage: 3 x 400 V - Maximum power: 7.5 kW - Frequency: 50 Hz - Ambient temperature: 5 - 35°C - Airflow: up to 390 m³/h - Overpressure: up to 370 mbar - Vacuum: up to -300 mbar - Measurement system: integrated - Drying system: integrated - Hose diameter: 6/4" - Drying temperature: adjustable within 70°C - 130°C - Safety features: pressure sensor, emergency safety switch - Declaration of conformity: CE

Year of construction: 2023, condition: like new (used), Nordcap ice cube maker with partial demineralization system The appliance comes directly from Miele and has only been used a few times in the test kitchen. Year of construction 2023 for hollow cube production Integrated storage container Water-bearing parts made from food-safe materials Positive spray system, fully automatic production control Automatic defrosting system (hot gas / fresh water) Dirt-prone components can be removed from the front, pre-installed drain nozzles Note: When installing the appliance, a wall clearance of at least 152 mm must be planned on site. Partial demineralization system Partial demineralization up to 5,600 l with silver-plated activated carbon for the supply of decarbonized water 0° dH (KH) Nordcap SDE 100 l Connection type: Ready to plug in Cooling type (machine): Air cooling External cladding: Stainless steel 1.4509, rounded edge protection Ksdpfx Ahetrd Nzj Uonf Internal cladding: Polyethylene inner container, AGION® Antibacteria coating, deep-drawn in one piece Self-cleaning system Gross weight:74 kg Net weight:63 kg Climate class:5 (+40 °C UT and 40 % RH) External width:670 External depth:595 External height:981 Year of construction:2023 Refrigerant:R-452A Refrigerant charge:450 g Electrical connected load:0.83 kW | 230 V | 1 | 50 Hz Capacity:approx. 100 kg hollow cube / 24 h Hollow cube size W x D x H in mm: approx. 35 x 29 x 36 Energy consumption:16.00 kWh/24h List price Nordcap SDE 100 l: € 3,789.00 plus VAT List price partial demineralization: 849,00 € plus VAT plus VAT PDF files: Data sheet Operating instructions Confo

Condition: good (used), Two complete Frigoscandia spiral freezing tunnels with Sabroe compressor unit The set consists of: 2 × Frigoscandia Gyrocompact GC76 spiral freezers Sabroe SAB163HF refrigeration compressor unit with insulated pressure vessel Knjdpfxow Hlz Ho Ah Uef 1–2. Frigoscandia Spiral Freezer Model: Gyrocompact Type: GC76 Airflow configuration: North–South Number of tiers: 29 Tier spacing: 80 mm Belt type: stainless steel mesh Belt width: 710 mm Internal dimensions: 4810 x 6100 mm Overall dimensions: 9140 x 9000 x 3900 mm Both freezers are identical in design and specifications. 3. Sabroe Refrigeration Compressor Unit Compressor type: SAB163HF (2 units) Year of manufacture: 1995 Refrigerant: R717 (ammonia) Pressure vessel: insulated, 1305 litres Application: the unit served both spiral freezers

Year of construction: 2001, operating hours: 69,000 h, condition: excellent (used), machine/vehicle number: SVA-20, Two aircooled plateicemakers, each with daily capacity of 20 tons ice. Built in adjustable ice-crusher allow any size and ice-thicknes 3-12mm. Both machines built in to a insulated 40' container ready to be used. Kedpfx Ajv Ip Eyoh Usnf

Condition: used, Year of construction: 1999, Please contact ATS Norway for more information Please provide reference number upon request: 21130 Specifications: Year of manufacture: 1999 Capacity: 13 t/m Crane diagram Knodpfxsw Rah Io Ah Ujf Grab included New control console Very little use Description: Palfinger 13 t/m crane from 1999.Comes with grab. Equipped with a new control console and has seen very little use.Has been in storage for several years, so some refurbishment should be expected.Ready for delivery. Own weight: 111 Model: PK 13000

Condition: new, Year of construction: 2024, machine/vehicle number: TR0046_ALM_RD110, COMPRESSED AIR DRYER ALMIG ALM-RD110 (available immediately!) including pre- and post-filter Type: ALM-RD 110 Delivery rate: 1.66 m³ / min * Reliable and energy-efficient air-cooled refrigeration dryer ALM-RD 110 little need for space Low operating costs Two integrated filters (pre-filter and microfilter) Energy efficient coolant R134a State-of-the-art heat exchanger for maximum energy savings Max. Working pressure 16 bar Max. Inlet temperature 60 ° C Min./max. Ambient temperature 5/50 ° C Voltage / frequency: 230V / 50Hz Compressed air connection 3/4 " Knodogy Hb Hspfx Ah Uef Dimensions: L x W x H: 473 x 454 x 832 mm Weight: 51 kg * Maximum compressed air flow, 35 ° C inlet temperature, 7 bar, 25 ° C ambient temperature, pressure dew point 3 ° C Water in the compressed air can cause serious damage to pneumatic tools, expensive machines (CNC) or similar applications. We therefore recommend one of our inexpensive compressed air dryers from the ALM-RD series. Visit our store. We always have a large selection of new and used compressors in stock!