Diesel test bench

Bosch EPS815 / 0683815001

Condition: good (used), Diesel engine, propulsion engine, marine diesel, injection pump, fuel pump, fuel injection pump -Manufacturer: Bosch, injection pump for 6-cylinder diesel engine Dujdpfxeh It Tre Apwst -Type: PES6R120/720LV B 403 860 177 RQV300-900 RV -Individual components: see photos -Number: 2x injection pumps available -Price: per piece -Dimensions: 460/215/H325 mm -Weight: 32 kg

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, pressure: 70 bar, total height: 1,600 mm, total width: 800 mm, total length: 1,200 mm, temperature: 40 °C, operating pressure: 70 bar, noise level: 80 dB, Equipment: documentation/manual, rotational speed infinitely variable, RO 510-DT2-15S – Compact Seawater Reverse Osmosis System, approx. 15,000 L/day Potable Water Compact, fully automated reverse osmosis system for the production of hygienic drinking and process water from natural seawater. Ideal for maritime applications, island supply, hotels, as well as small-scale industrial and utility operations. Technical Specifications Type: RO 510-DT2-15S Process: Reverse osmosis with Disc-Tube (DT) technology Permeate Output: Approx. 15,000 L/day (15 m³/day, depending on operating conditions) Feed Water: Seawater with high conductivity, approx. 55,000 µS/cm (high salinity) Permeate Quality: Drinking water, approx. 500 mg/L residual minerals (reference value) Recovery Rate: Approx. 30% (typical operating range) at 55,000 µS/cm conductivity Design Temperature: Approx. 25°C (Operating range: approx. −2 to 35°C) Process Technology & Configuration DT module with open feed channel – highly fouling-tolerant and fully cleanable Mechanical pre-filtration (high-performance filter + 10 µm cartridge filter) Chemical pre-treatment of feed water (acid dosing) generally not required Integrated rinsing and CIP (clean-in-place) function, PLC controlled Skid-mounted on stainless steel frame (AISI 316) High-pressure lines in stainless steel, low-pressure section in seawater-resistant plastic Pumped seawater components made from corrosion-resistant materials Operating & Energy Data Feed Water Flow: Approx. 1,000 L/h (reference value) RO Module Operating Pressure: High pressure range, designed for seawater desalination Power supply: 230 V, 50 Hz, single phase Connected load: Approx. 6 kW Control, Monitoring & Safety Local operator panel with integrated PLC control Monitoring of pressures, flows, conductivity, and operating hours Automatic shutdown in case of: - Insufficient feed pressure - Exceeding permissible operating pressure - Overpressure in permeate/concentrate lines - Exceeding defined conductivity limits (with automatic redirection to drain) Automatic “Stop & Rinse” function: Permeate flushes all seawater-contacted components on shutdown, reducing fouling during system standby Dimensions & Weight (Skid) L × W × H: Approx. 1,190 × 705 × 1,500 mm Weight: Approx. 530 kg (dry), approx. 605 kg (operating) Typical Applications Vessels, offshore platforms, ports Island and coastal supply Hotels, resorts, small industrial and utility operations Dsdow Uf Ihspfx Apwjut Backup or peak load system for existing potable water production Additional technical documentation, photos, and information on scope of supply, pricing, and availability are available on request.

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 2026, NEW NEW Cream Cooker CK 60 NEW NEW Efficient operation for cooking and heating creams and masses Dusdpfx Apev H Titowot Precise temperature control Digital timer switch, 2 speeds Kettle capacity: 60 liters Working volumes: 4 to 38 liters Stainless steel design, thermal oil system Hand wheel for easy emptying Mobile machine with locking caster Connection: 400V, 16A CEE plug Dimensions: 960 x 780 x 1630 mm (WxDxH) NEW machine with warranty + spare parts service Options: Delivery service Leasing & rental options Touch panel LCD DN50 outlet tap Stronger heating system Maintenance contract Service package Training & commissioning You'll only find such a TOP selection with us!

Year of construction: 1992, condition: used, grinding height 50 mm grinding width 120 mm grinding wheel diameter 600 mm total power requirement 85 kW weight of the machine ca. 9500 kg D I S K U S (Germany) CNC Controlled Double Sided Vertical Spindle Surface Grinder with Rotary Workpiece Feed System and IONIC Size Control Model DDS 600 III PLM - CNC Year 1992 erial No. 7924 _____ Grinding wheel Ø x bore x height, each 600 x 150 x 75 mm Approximate Workpiece dimensions: Grinding height, approx. 1.5 – 50 mm Grinding width, appox. 20 - 120 mm Vertical quill adjustment, each, approx. 150 mm Infeed of grinding wheels via CNC 0.0001 mm Feed of workpiece transportation device, infinitely variable 40 – 235 mm/sec Grinding wheel speed, each (30 m/s) 191 - 955 rpm Grinding spindle drive, each infinitely variable 37 kW Total electrical load, approx. 85 kW - 380 V - 50 Hz Dodpot Hw Najfx Apwsut Weight, approx. 9,500 kg Accessories / Special Features * SIEMENS CNC Control, Model SINUMERIK 810 G, with monitor, for 4 axes i.e. * Movement of 2 spindle quills, dressing device, WP Rotation. Direct programming of Grinding Process data on keyboard. In connection with a IONIC Size Control No. 17 A / 68.000 with two tracers for measuring the thickness of the workpieces after grinding process, and corresponding infeed of the grinding wheels. Continuous display of measuring results on the monitor, with statistics, workpiece counter, etc. Digital Display Ampere for both grinding wheel drives and for grinding spindle speeds, etc. . * Positioning control device for supervising the height of the lower grinding wheel.. * Double column design as a portal for extra stability and higher accuracy * Rotary workpiece transportation device with infinitely variable feeds. The workpieces are Manually stacked in a device and forwarded by a transportation carrier disk thru the grinding wheels, there are two WP- down holders, one equipped with a overheight stop-control. * Angled grinding wheel dressing device, with automatic dressing process, integrated in the control as CNC axis, with safety switch-off. * Separate large switch cabinet. * Automatic central lubrication. Large pneumatic control system * Large Coolant device 6 (F) with filtering unit and magnetic separator. * Various Grinding wheels, WP transport carrier disks, 2 flanges, large Olimist separator, etc. This machine is very suitable for simultaneous double-sided grinding of large series of workpieces, e.g. punched parts, piston rings, hydraulic parts, rotors, distance rings, etc. Condition : Very good. Machine can be soon inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Used machine Dedpfxewpm I Hj Apwsut Features and technical data: - Press area: 2,200 × 1,100 mm - Number of cylinders: 4 - Max. pressing force: 60 tons - Version: single deck - Heating plates: gold anodized ELKOM energy-saving plates - Opening width: 350 mm - Connected load: 14 kW - Piston diameter: 80 mm - Operating pressure: 365 atü Dimensions: 2,600 m × 1,250 m × 1,750 mm Availability: short-term Location: Röllbach

Year of construction: 2008, condition: good (used), functionality: fully functional, machine/vehicle number: CRi PC singelline, Well-functioning Common Rail diesel injector test bench. The machine is equipped with a new PC and recent software. It is supplied with a large selection of clamping blocks, test cables, return connections, and high-pressure pipes. Duodpfxoxiyxve Apwjt

Condition: new, functionality: fully functional, Year of construction: 2026, Product characteristics: The Cormak 2-ton gantry crane is a specialized industrial machine designed for moving heavy loads in industrial halls. It consists of many elements, including a supporting frame, a trolley and other components that enable easy, safe and precise movement of loads horizontally and lifting and lowering them using hooks. The model is distinguished primarily by its durability and stable construction, thanks to which it can be used in difficult industrial conditions. This crane is also resistant to torsion, which is ensured by additional reinforcements used in the structure. One of the most important features of the crane are four return rollers that ensure easy movement of heavy loads. These rollers are extremely durable and abrasion-resistant, which guarantees their long service life. Another important element are the built-in parking brakes, which ensure safe stopping of the crane in any place. Height adjustment on the device is easy and safe when the lever is not loaded and with the help of two screws securing each bracket. The crane's structure is durable and stable, and its ease of use makes it an ideal solution for companies that need an efficient and reliable machine for moving heavy loads. Moreover, the multitude of retrofitting options allows it to meet even more applications and tasks in various industrial sectors. Thanks to its efficiency and precision, the overhead crane is a versatile work tool that can be additionally equipped with rope or chain winches. After using a block, an overhead crane with a winch or chain allows for even more precise and effective movement of heavy loads. As a result, it is used in many industrial sectors, such as construction, metallurgy and the chemical industry. Using a gantry crane, you can carry out warehouse, assembly, loading and unloading works, as well as repairs. All these activities are performed with high precision and safety, which in turn translates into higher quality of work. Technical parameters: Load capacity: 2000 kg Dujdpfx Apsridh Nowjt Double T-carrier: 100 x 180 mm Height: 2400 mm – 3600 mm Width: 2360 mm Weight: 168 kg Overhead crane without a winch visible in the photos

Condition: used, mileage: 72,000 km, power: 78 kW (106.05 HP), first registration: 01/2012, fuel type: diesel, overall weight: 3,500 kg, gearing type: automatic, emission class: euro4, Equipment: ABS, central locking, electronic stability program (ESP), soot filter, Iveco Daily 35S11, Size: 2 - Maxi, VAT deductible. Net price: €6,390 20 units in stock ---- Please no emails / Emails can only be processed sporadically due to time constraints! Thank you for your understanding. ---- Opening hours and further information: Viewing and purchase possible without appointment: MO - THU: 9:00 to 16:00 FR: 9:00 - 13:00 SA: 9:00 - 12:00 Address: Tabakried 11 84076 Pfeffenhausen Germany For inquiries: Christian Hirsch Please call several times as we are frequently with customers. ---- Full service history / workshop maintained: yes Emission standard: EURO 4 Environmental badge: Green Previous owner: 1 VAT deductible: yes Emission standard: Euro 4 = Green badge Duedov Nf Rzspfx Apwot Available with or without air suspension -Reversing camera-LED -Interior lighting with motion sensor -Cargo compartment length: 4.35 m -Cargo compartment width: 2.05 m -Cargo compartment height: 2.07 m Folding passenger seat Interior features: Cup holder, Power steering Exterior features: Sliding side door, Electric and heated side mirrors, Central locking incl. remote control, Electric front windows Technology: Outside temperature display On-board computer Safety & Environment: Driver airbag, Immobilizer, ABS, ESP, Traction control, Particulate filter For inquiries: Christian Hirsch Please try calling several times as we are often assisting customers. More offers at / Equipment details were determined using VIN inquiry; technical errors possible. ---- Information provided online is non-binding and does not represent guaranteed characteristics. The seller does not accept liability for typing or data transmission errors, changes, or entry errors. Subject to errors and prior sale. Sale to businesses or for export only.

Condition: used, Year of construction: 1990, Technical details: Dsdpfx Aju Icdaspwjut pressure: 100 t chamfer lenght: 3100 mm distance between columns: 2630 mm control for program: CNC-Steuerung CYBELEC max. stroke: ca. 215 mm throat: 255 mm dayligth: 410 mm ajustment speed: 100 mm/sec working feed: 6,5 mm/sec back gauge: 500 motorisch table-size: 3100 x 60 mm work height max.: 890 mm connection voltage: 3x380 V / 50 Hz V total power requirement: 5,5 kW weight of the machine ca.: 7,9 t machine dimensions LxWxH: ca. 3,8 x 1,5 x 2,5 m 500 mm backgauge, width 2570 mm; 2 support frames can be moved manually across the entire width Operation via control panel and/or control stand for two-hand/foot operation Control also via manual control unit incl. accessories in stock i.D. *

Condition: good (used), Year of construction: 2000, Equipment: documentation/manual, LATHE TORNADO COLCHESTER 200 CNC FANUC GE Series DIAM. AUTOCENTRATING MANDRIN : 250 mm CORSE : X : 215 mm Z : 400 mm TOOL MAGAZINE : 12 POSITIONS Duodpfx Apjtuut Uewet INCLUDING VARIOUS TOOL HOLDERS AND TOOLS BAR WIDTH : 65 mm TAILSTOCK IN CYCLE CHIP EVACUATOR INCLUDING ALL DOCUMENTATION