Hydraulic pump

Bosch

Condition: used, functionality: fully functional, For sale: a brushless servomotor BOSCH SE-LB3.075.060-04.000 with permanent magnets and a 24 V holding brake. Data from the nameplate: - Manufacturer: BOSCH - Model: SE-LB3.075.060-04.000 - Part number: Starting torque M₀: 8.2 Nm - Current I₀: 14.0 A - Rated speed: 6000 rpm - Rotor moment of inertia: 17.9 kg·cm² - Protection rating according to the nameplate: IP65 - Insulation class: F - Brake: 24 V, 8 Nm, 0.6 A Lasdpfxo Adudmj Ah Soh - Country of manufacture: Germany Condition: used, tested, motor is fully functional. Visible signs of use and a damaged connector – the connector cover is broken and the connector housing has cracks, as shown in the pictures. The connector requires repair or replacement before installation.

Condition: excellent (used), Height: approx. 2000–4500 mm Width: approx. 1130 mm Lajdpfx Ahop Dukqs Sjh Usable depth: 1 x 1000 mm Upright load capacity: up to 3000 kg Arm load capacity: up to 500 kg 6 storage levels including base Single-sided design Bolted foot profiles Made from hot-rolled IPE sections Finish: high-quality industrial lacquer RAL 5010 Freely adjustable cantilever arms in 100 mm increments Rack upright: foot and arms bolted Increase storage capacity with reduced footprint Organized storage of long goods Price: €400/net per upright incl. We configure your custom racking system. Contact us. We also buy racks. Please send pictures and dimensions—we will make you an offer. Contact Brennholz Blum – Mr. Dominik Blum Delivery is available upon request For questions, just call or write.

Condition: used, functionality: fully functional, For sale: a brushless servomotor, BOSCH SE-LB3.075.030-04.000, with permanent magnets and a 24 V holding brake. Technical specifications according to the nameplate: Manufacturer: BOSCH Type: SE-LB3.075.030-04.000 Number: Lajdj Adt Nhjpfx Ah Seh Stock number: 104-915 093 Starting torque (M₀): 8.7 Nm Starting current (I₀): 8.0 A Rated speed: 3000 rpm Rotor moment of inertia: 17.9 kg·cm² Ingress protection rating according to the nameplate: IP65 Insulation class: F Holding brake: 24 V, 8 Nm, 0.8 A Country of manufacture: Germany — Made in Germany Condition: Used, functional motor. Damaged plastic housing of one of the electrical connectors — a fragment broken off around the pins, as shown in the pictures. The connector requires repair or replacement before use.

Condition: ready for operation (used), Bosch SPM 50 spindle module SN:372860, used, normal signs of wear, 100% functional, delivery as shown in the photos. Lsdsx Eqzcspfx Ah Seah

Condition: used, L + Z Lathe ZMM - SLIVEN (Bulmak - Bulgaria) Type CU 325 Machine No.: 8169 Year of manufacture: 2002 Centre distance: 1000 mm Swing over bed: 320 mm Centre height over bed: 160 mm Swing over cross slide: 190 mm Centre height over cross slide: 95 mm Spindle bore: 32 mm Spindle speeds (forward): 85 - 2000 rpm, 12 steps Spindle speeds (reverse): 130 - 1300 rpm, 6 steps Feeds: longitudinal and cross Chuck flange: short taper DIN 55027 size 5 Tailstock quill taper: MT 3 Drive power: 2.2 kW Power supply: 400 Volt, 50 Hz - 3-axis digital readout RSF, type Z 730 - Spindle speed adjustable in machining direction via 12 gearbox steps - Spindle speed adjustable in counter direction via 6 gearbox steps - 3-jaw chuck BISON Ø 160 mm with 1 set of stepped jaws - 4-way universal tool post - Coolant tank with pump integrated in machine base - Spindle brake operated via direction lever - Emergency stop via foot pedal and emergency switch - Foldable chuck guard - Machine lamp - Splash guard - Travelling steady rest - Quick-change drill chuck with MT 3 taper Ledevt U Tmjpfx Ah Ssah - Multiple change gears - Operating manual with electrical diagram Installation dimensions (L x W x H): 2100 x 800 x 1600 mm Weight: 750 kg Good condition

Condition: ready for operation (used), Bosch MP 30 control panel, used, with normal signs of wear, 100% functional. Lajdpsi D Uagofx Ah Ssh

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. Lasdpezbytlefx Ah Soh When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. The saw angle is read on the scale disc.

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, hydraulic torque pump, torque wrench pump Ljdsivqm Ejpfx Ah Sjah -Manufacturer: HAWE, hydraulic unit -Type: MP 24-H 1.77/B 5-A 1/300- -Motor: 0.55 kW / 1390 rpm / 380 V -Pressure: up to 310 bar -Flow rate: 1.73 l/min -Individual components: see photos -Dimensions: 325/160/H295 mm -Weight: 19 kg

Condition: excellent (used), For sale: a functional Rexroth hydraulic pump with a mounted Rexroth control valve. The condition of the housing, shaft, connections, and other components is shown in the photos. The following markings were read from the nameplates: Component Designation / Number Pump Type SY2DFEE-20/100-100 Pump Material Number (MNR) R901073415 Pump Serial Number 31132779 Additional Number on the Pump Nameplate Lodpfxoz Spfrs Ah Seah Pump Designation FD 07W02, SN 000001 Valve Type VT-DFPE-A-22/G24K0/2D0V/V-019 Valve Material Number (MNR) R901031176 Additional Number on the Valve Nameplate Valve Designation SN 000002 The pump is used and shows signs of wear, as visible in the photos. Before purchasing, it is recommended to compare the complete markings on the nameplates, as well as the shaft and connections, with the requirements of your machine.

Condition: new, I am offering for sale an original, high-voltage traction inverter by Bosch, intended for Volkswagen AG, with part number 95C 907 123 EM27. This is a development component (ETK – Entwicklungs-Test-Komponente) used during research and development work on electric drive systems. The unit comes directly from a Bosch/VW development project and is housed in its original Bosch transport case with foam padding. The package also includes the original transport documentation and high-voltage test and inspection reports, confirming that quality control has been carried out. The inverter is responsible for converting direct current from the high-voltage battery into three-phase alternating current to power the electric motor. It is one of the key components of an electric vehicle’s drive system. Technical specifications: Manufacturer: Bosch Project customer: Volkswagen AG OEM number: 95C 907 123 Version: 95C 907 123 EM27 Bosch number: 0437.B00.0LV-01 Development version: C1-Muster 600A ETK Country of manufacture: Germany Lsdpfx Aoz Snd Sjh Ssah Included in the set: Bosch high-voltage inverter Original Bosch transport case Foam transport protection Bosch transport documentation Test and quality control reports Condition: 100% technically functional. Very good visual condition. Complete with original documentation and transport case. Sold exactly as shown in the pictures.

Condition: used, Centrifugal pump, water pump -Pump: is sold as dismanteld -Delivery rate: 18-50 m³/h -max H: 12.7-8.5 mWs -Motor power: 2 kW -Speed: 2825 rpm -Pipe connection inlet: DN65 Lsdpfecti Avex Ah Soah -Pipe connection outlet: DN50 -Dimensions: 460/280/H240 mm -Weight: 37 kg

Condition: excellent (used), ///// PRICE INDICATED IS FOR 1 UNIT ///// For sale: a professional Bosch Rexroth industrial screwdriver designed for use in production lines and assembly stations. The device is characterized by high precision, durability, and the ability to operate continuously in industrial environments (automotive, mass production). The item is used. It shows normal signs of use but is in good technical condition. ⚙️ Available models (to choose from) 🔹 Rexroth ESA075G-G Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESV073-G Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Country of manufacture: Germany 🔹 Rexroth ESA150S-G Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany Laedez Smk Repfx Ah Sjh 🔹 Rexroth ESA013G-G Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common parameters Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Manufacturer: Bosch Rexroth 📦 Included in the set ✔️ 1x screwdriver (selected model) ✔️ head (as shown in the picture – straight or angled) 📊 Condition Used – normal signs of use. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry mass production precise tightening

Condition: used, Bosch Rexroth Type: SCARA SR6, control panel defective Bosch Rexroth pivoting arm robot, turbo SCARA SR6 with control unit Lodpjzh U R Rjfx Ah Sjah Rated load: 2 kg Maximum load (sleeve diameter 20 mm): 5 kg Maximum load (sleeve diameter 25 mm): 8 kg Rated maximum moment of inertia (axis 4): 500 kgcm² Maximum moment of inertia (axis 4): 1000 kgcm² Horizontal force, continuous/maximum: 60/150 N Vertical force, continuous/maximum: 200/300 N Torque (axis 4), rated/maximum: 5/10 Nm Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: good (used), hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, traction motor, drive motor -Manufacturer: Bosch, double hydraulic pump -Type: 0 006 -Shaft: conical Ø 14-17 mm Lajdpovvic Uefx Ah Soh -Flange: Ø 80 mm -Number: 3x pumps available -Price: per piece -Dimensions: 220/90/H120 mm -Weight: 5.3 kg/piece

Condition: used, Bosch Type: SCARA SR8 SCARA SR8 pivoting arm robot with control unit Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have by telephone. Ljdozdir Njpfx Ah Seah Written orders can be placed by email or fax.