2010 BRIDGESTONE | R 164 \ TRAILERBAND | 425/65 R 22.5| 4 STUKS | 12-12-8-5 MM PROFIEL|

BRIDGESTONE R 164 \ TRAILERBAND | 425/65 R 22.5| 4 STUKS | ...

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer ---- Type: CM 35 (Horizontal Silo) Axles and Suspension: Disc brakes 22.5" SAF axle assemblies, 3 x 9t with air suspension, axle spacing is 2 x 1310 mm, raising and lowering valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor equipment, 3rd axle liftable with Wabco Optiturn. Rims and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice, on Alcoa Ultra One aluminum rims, size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO air brake system with RSS, according to standard 98/12/CE - ECE R13/09, brake wear indicator connected. Landing Gear: Mechanical landing legs with two speeds, 2 x 20t support load, with pivoting foot. Electrical System: All lights in LED version, 24 volt electrical installation consisting of: one 15-pin socket mounted in front of the kingpin on the chassis carrier, yellow side marker lights in prescribed quantity, rear position lights, front marker lights, rear license plate lights, lights according to standards 97/28/CE-2007/35/CE, 2 multi-chamber rear lights mounted at turntable height in aluminum brackets as per standards 97/28/CE-2007/35/CE, 2 rotating LED work lights mounted top left and right on the tank, yellow warning light at rear at hose pipe height, 2 x reversing lights in underrun protection, 2 x reversing lights at leg height (each separately switchable from the energy console). Tank Design: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn), single-chamber tank, with a capacity of 35,000 liters, tank warranty: 24 months from delivery, kingpin 2" according to standard 94/20/CE Operating Parameters: Pressure vessel as per the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 Bar – operating pressure 2.0 Bar, operating temperature -40° to +80° Filling Options: 3 manholes DN 450 with swiveling and folding dome lids. Each dome lid is pressure-tight, secured with 4 wing nuts, support for dome lids on top for storage, rain channel closed at front – open at rear. Material Discharge: 2 product outlet cones with synthetic fabric inserts for fluidizing, individual discharge lines DN 100 made of steel and connected to the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 ball valve with ring nozzle, remote control for the ball valve and Storz A coupling at the end of the discharge line. Air Piping: Nwodpfxjx Nufyj Abdec A 2.5" stainless-steel air manifold installed on the right-hand operation side. The air line is routed to the front up to the end of the silo with a check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold is equipped with ball valves for top air, auxiliary air, and fluidization. Top air 2" rear right, PRESSURE LINE INLET REAR RIGHT, external air intake Storz C at the air line tube, pneumatic connection with blow-off gun and spiral hose on top of the walkway near the access ladder, 1 x vibrator on top of the tank, air line located centrally on the walkway for cleaning with gun, air line below in tool box for cleaning with gun. Ladder and Access: 1 aluminum ladder mounted at the rear left of the vehicle, 1 pneumatic aluminum safety scissor handrail with locking system acting on the brake, 1 aluminum...

Condition: new, empty load weight: 7,000 kg, maximum load weight: 27,000 kg, overall weight: 34,000 kg, axle configuration: 3 axles, loading space volume: 35 m³, suspension: steel, tire size: 385/65R22,5, color: white, Year of construction: 2018, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3 axles, leaf suspension, ABS (anti-lock braking system), support legs. Body: approx. 35 m³ with electric compressor, 380V three-phase power connection. COC papers available, EU registration possible! Nwodpfx Abovhhtvjdjc COC papers available for registration in the European Community! Compressor available at an additional charge of €7,500.00! ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors!

Condition: new, functionality: fully functional, empty load weight: 6,500 kg, maximum load weight: 51,500 kg, loading space volume: 35,000 m³, tire size: 385/65 R 22,5, Year of construction: 2026, operation weight: 45,000 kg, chassis manufacturer: Lider, Equipment: ABS, Cement Tanker Semi-Trailer. Electric - Diesel Engine Compressor Lider Trailer for Heavy-Duty Trailers High Quality and Durability Manufacturing. EU Standards. EBS or Double Line Brake Systems. One-year Warranty. Customer Requested Colour. Nwjdjrcb Rmjpfx Abdec 2026 Production

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Njdpfx Aex Nuf Hsbdowc Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, maximum load weight: 31,480 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 35 m³, Equipment: ABS, New vehicle - Available immediately! For sale, lease, or lease with option to purchase upon request! GRW - VAN HOOL 35m³ Horizontal Cement Silo - NEW----* Manufacturer: GRW / VAN HOOL * Type: Cement Silo * First registered: - (New vehicle) * Color: Chassis RAL 7024 Graphite Gray, Container RAL 9001 Cream White * Volume: 35m³ / 1 Chamber * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 4,520 kg * Payload: 31,480 kg * Axles: 3x SAF axles / disc brakes Nwodpfjwaqhlex Abdoc * Tires: 385/65 R22.5 NEW / Alcoa aluminum rims * Suspension: Air suspension * ABS / EBS * 2 bar pressure tank * Operating temperature from -40°C to +80°C * 1 chamber * 2 dome covers * 4" pinch valves * 4" central outlet to the rear * 1x DN65 aluminum pipe (painted) runs on the right side from the main air supply to the distributor * 1x DN65 upper air hose line * 2x hose pipe boxes left and right (5m) * Fluidization mats * 1,185mm fifth wheel height * Aluminum chassis * Aluminum walkway with access to the rear left * Single fender * Full load supports * Toolbox * Aluminum air tank * Loading pressure gauge * LED work lights * LED reversing lights * Reverse alarm New vehicle - Available immediately! For sale, rent, or lease with option to purchase upon request! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, occasional errors may have crept into the text or information. We assume no liability for errors, changes, or prior sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT23502035606, empty load weight: 5,325 kg, maximum load weight: 26,675 kg, overall weight: 3,200 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,490 mm, suspension: air, tire size: 385/65 R22.5", color: grey, trailer brake: trailer braked, Year of construction: 2024, The images shown are archive photos; the vehicle may still be in use! Chassis for Tipper Semi-Trailer Fine-grain steel welded construction, fifth wheel plate with replaceable 2" kingpin and two kingpin positions Kingpin installed in the forward position Curved front panel (patented) 24-ton, 2-speed landing gear, single-sided operation, with semi-circular lower section and straight mounting plate, with drawbar equalizer Unhitching under load is not possible; when unhitched, the vehicle must stand with a rearward slope. Free rear swing clearance approx. 2100 mm in the rear position and approx. 2600 mm in the forward position! Wheel chocks with holder Aluminum side underrun protection Foldable rear underrun protection Rear underrun protection with spring assist for easier operation Half-shell fenders Splash guards behind the last axle in asphalt design, hinged on the fender, with hook-up option at the top of the fender, fender shortened Tarp bar with holder Tow hook at the rear (not for Revolution model) Axles & Suspension BPW or SAF drum brake axles, manufacturer’s option Axles in off-road version "Axles/chassis laser measured" to reduce tire wear and fuel consumption Air suspension 1st axle with automatic lift axle, including forced lowering and starting aid, operation via "3x braking" (starting aid functions up to a 30% axle overload and up to a max. speed of 25 km/h) "Hot-dip galvanized lift axle mechanism" 10-year rust-through warranty Braking System 2-line compressed air braking system Color-coded lines for easier servicing. Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connecting line 24 Volt EBS, Electronic Braking System with EBS socket at the front, without connecting cable Attention: The trailer may only be towed by traction vehicles capable of ensuring ABS function! With lift & lower valve Vehicle stability control system Paver brake, electrically controlled from the truck, without truck installation Automatic tipping lowering with shut-off valve Wheels and Tires 385/65 R22.5, manufacturer’s option Steel rims, factory silver Electrics 24 Volt, multi-chamber taillights, yellow LED side marker lights 2 white LED front position lights 2 white/red lane marker lights at the rear 1 x 15-pin socket at the front, without connecting cable 1 LED spotlight with integrated "Osprey" camera as trough camera (technical inspection required upon order) LED strobe light(s) at rear, controlled via switch in the truck, without truck installation, wired to pin 12 Upon order, specify pin allocation! Njdpfx Abox Dkpnjdjwc Reversing camera system with color flat-screen monitor, wireless connection to monitor, monitor with suction mount and power supply via 24V vehicle socket Registration/Country & Plates Germany With Dekra approval and certificate (per §13 EC-FGV) 24/7 Service Hotline Body stability to EN 12642 Prepared for single-line license plate holder Conspicuity markings with reflective tape to ECE R 048, white at the side and red at the rear Paintwork Frame: DB 7350 Novagrau "10-year rust-through warranty" Landing legs: Black coated Body/Side panel: Scania Urban Grey 2389173 Sliding tarp: RAL 7038 Agate Grey