2010 BRIDGESTONE TRAILER BAND |425/65 R 22.5 | 12-12-6-3 MM PROFIEL.

BRIDGESTONE TRAILER BAND |425/65 R 22.5 | 12-12-6-3 MM PROF...

Condition: ready for operation (used), Dürkopp Adler 767 - Fas Nkjdexlcw Hspfx Abvow Dürkopp Adler 767 Fa price from 1,200 to 1,800 euros

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Njdpotvau Ajfx Abvskw Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: like new (used), Year of construction: 2007, operating hours: 8,590 h, machine/vehicle number: V300397 - 10, Machine type : BOA Continette II Machine number : V300397 - 10 Norm :according CE Machinery Directive and AS 3000 Surface treatment : RAL 5015 Voltage : 240-415 Volt / 50 Hz E-motor hydraulic pump : 22 kW Protection class : IP 55 Insulation class : F Total weight : ± 9000 kg Main dimensions (lxwxh) : 6415x2665x3034 Channel dimensions (lxwxh) : 2030x1000x720 Filling hopper dimensions (lxw): 1200x730 Bale dimensions (lxwxh) : variable*800*730 Pressure force (max. 280 bar) : 882 kN Nsdpfxsihpgas Abvokw Specific pressure : 43 ton Contents hydraulic aggregate : 800 litre Hydraulic oil specification : Shell Tellus TD 46 Max. pressure : 280 bar Number of cylinders : 3 Hydromat type (vertical) : H 160-4 Number of binding wires : 4 PLC : Siemens Simatic CPU S7 Operation terminal : Touch screen Siemens Sound-pressure level : 75-86 dB(A) 6th of July was baler exchanged and not used Spare parts: wire lances, twist fingers, hydraulic valves, ram hydraulic cylinder, hydraulic pump, PLC modules, touch screen

Condition: reconditioned (used), Year of construction: 2002, operating hours: 44,590 h, functionality: fully functional, pressing force: 200 t, filling opening width: 1,020 mm, filling opening length: 2,000 mm, bale width: 1,100 mm, bale height: 1,100 mm, oil tank capacity: 3,100 l, power: 150 kW (203.94 HP), year of last overhaul: 2025, Technical data baler: Manufacturer MACPRESSE EUROPA S.R.L. Typ 112 Year of construction 2002, partially refurbished in December 2025 Operating hours 44,590 hours, stand December 2025 Press power main press 200 tons Specific press capacity 16,5 kg/cm² Feed channel 2,000 x 1,020 mm Filling volume 2,65 cm³ Theoretic throughput rate 795 m³/h Bale size 1,100 x 1,100 mm, length variable Driving motor 2 x 75 kW Tying system 5-fold horizontal, full automatic Throughput rate at MSW approx. 48 up to 54 tons/h, depends on material Volume hydraulic oil tank 3,100 l Nkjdpfxox Dnb Uj Abvjw Machine weight baler approx. 50,8 tons Scope of delifery: 1 piece baler MACPRESSE, type 111A 1 operating manual with CE declaration, electrical and hydraulic circuit diagram Comments: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Hydraulic oil tank emptied and cleaned • Oil and air filters replaced • New hydraulic oil filled • All hydraulic hoses replaced • Press ram dismantled, broken down into individual parts, mechanics made operational • Front two main rollers replaced • Knives on the press ram replaced • Main hydraulic cylinder dismantled, disassembled, cylinder tube and piston rod checked, complete seal set replaced • Counter knife in the frame replaced • Knife gap adjusted to approx. 3 mm • Upper steel guide rails in the frame on the left and right replaced. • Worn press base cut out, base plate replaced with wear-resistant HARDOX steel. • Binding and twisting unit dismantled, broken down into individual parts, mechanics made functional, all twisting shafts and ball bearings replaced. • All wire rollers in the needle heads replaced • Wire knives cleaned and readjusted, chains greased and tensioned • All wire deflection rollers made operational • All door contact switches replaced • Wirbulator device dismantled, disassembled and made operational • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode, see our video for the machine function test. The documentation (BA, CE, electrical/hydraulic circuit diagram) is complete. Viewing is possible by appointment. We accept no liability for the technical specifications or any errors.

Condition: used, mileage: 1,056,000 km, power: 287 kW (390.21 HP), first registration: 06/2006, fuel type: diesel, gearing type: automatic, emission class: euro3, Equipment: ABS, air conditioning, TGA 18.400 Good working truck Belgium registration Nkedpjv T Sn Iofx Abvow

Condition: used, axle configuration: 3 axles, first registration: 03/2009, color: other, Year of construction: 2009, Empty weight: 7.300 kg Axle 1: left 8 mm right 8 mm Axle 2: left 7 mm right 7 mm Axle 3: left 8 mm right 8 mm We have the possibility to stack trailers!  Nkjdpfxjv Tcqte Abvsw

Condition: good (used), Year of construction: 1996, Baler including conveyor, wire bins Nedoxtmyzepfx Abvjkw Manufacturer: Bollegraaf Typ: HBC 50A Build in: 1996 Baler weight: 19000 kg Weight conveyor: 6000 kg Engine: 30 kW Vertical binding Number of wires: 5

Condition: used, mileage: 1,001 km, first registration: 01/1972, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 4x2, color: grey, driver cabin: other, gearing type: mechanical, suspension: steel, Vehicle location: Bovenden, Body: classic car, right-hand drive All information without guarantee, ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Nsdsmyacrepfx Abvskw - .

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: 97020-0010, pressing force: 80 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 720 mm, power: 45 kW (61.18 HP), operating pressure: 250 bar, Equipment: documentation/manual, This baler is sold by Bollegraaf Recycling Solutions. This is a HBC80 baler (45kW) with cross wires. Bale press built: 1997 Baler Nkedpfx Aexvh Dyjbvsw Bollegraaf HBC80 45 kW Bale dimensions: 1100 x 720 mm 45 kW main motor Intermediate hopper Conveyor chute Control cabinet Schneider PLC

Condition: like new (used), Year of construction: 2017, functionality: fully functional, pressing force: 5 t, Fully equipped, ready to use! Works perfectly. Nsdpfx Abex E Ad Njvekw