Wheel excavator

Caterpillar M320F IHC

Condition: used, fuel tank capacity: 415 l, color: yellow, Year of construction: 2018, operating hours: 6,610 h, Equipment: air conditioning, Drive: Wheel Empty weight: 20.000 kg Dimensions (LxBxH): 892 x 255 x 332 cm Engine type: Caterpillar CAT C7.1 ACERT Digging depth: 5.98 m Dkedpfx Ajyuwtpogget = Additional options and accessories = - Climate control

Condition: used, Year of construction: 2010, operating hours: 11,780 h, Equipment: ABS, all wheel drive, Volvo EXCAVATOR EW140C air conditioning Dkedpoyltr Asfx Aggst 16,850 kg 91 kW Top condition

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm Dsdot I D U Eepfx Aggskt stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: good (used), Technical data: 2 hydraulically adjustable rollers 3 driven rollers Dkjdpfx Agjytyf Segjt Roller diameter: 225 mm Shaft diameter: 75 mm Round steel: diameter 50 mm Square steel: 45 x 45 mm Flat steel: 200 x 20 mm Angle steel: 75 x 15 mm Bending speed: 7 m/min Motor power: 4 kW Machine can work horizontally or vertically Dimensions (L x W x H): approx. 1200 x 1100 x 1200 mm Weight: approx. 1.3 t Accessories: various tools The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are appropriate for its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 1995, roller (top) diameter: 330 mm, sheet thickness (max.): 23 mm, Manufacturer: IMCAR Type: SIHR Year of manufacture: 1995 Extended end for profile bending rolls (Pipe & T-Angle) Central lubrication Digital readout position side rolls Fully hydraulic machine Hydraulic drop end Hardened rolls Specifications Metric US Standard Roll width: 3100 mm Sheet thickness at 3 x top roll Ø: 18 mm Sheet thickness at 5 x top roll Ø: 23 mm Sheet thickness for initial bending: 20 mm Dkodpfx Agjwpku Djget Top roll Ø: 330 mm Side roll Ø: 310 mm Number of rolls: 3 Bending speed: 0 - 5 Side roll adjustment: 200 mm/min. Number of driven rolls: 2 Power: 15 kW Dimensions (estimated) Length: 5250 mm Width: 1700 mm Height: 1700 mm Weight: 11900 kg Please note: The information on this page has been provided to the best of our knowledge, and wherever possible, from the manufacturer. The information is given in good faith, but accuracy cannot be guaranteed. Accordingly, it does not constitute representation or contractual terms. We recommend you check all critical details.

Condition: used, Universal lathe with guide and lead screw, TOS Trenčín SN 63 C (year of manufacture 2000) from a business liquidation. Designed with a 630 mm swing over bed and a 3000 mm distance between centers, suitable for medium to heavy shafts, flanges, and large cylindrical components. EQUIPMENT & TECHNOLOGY - Swing over bed: 630 mm - Distance between centers: 3000 mm (long bed version "C") - Hardened and ground bed ways - Guide and lead screw drive: Metric and inch threading - 2-axis digital readout (DRO) - Steady rests/follow rests available (see photos) The SN series from TOS Trenčín is considered a classic among conventional universal lathes – robust, precise, and easy to maintain. CONDITION Dkjdpfx Aszphf Degget Used, functional. Located near Nuremberg, viewing by appointment. Sold as is, no warranty. ACCESSORIES (as shown in the photos) - 3-jaw chuck - Fixed and traveling steady rests / follow rests - Tailstock with center - 4-way tool holder - Set of turning tools / quick-change tool holder - 2-axis digital readout (DRO) Price on request. We will be happy to advise you – competent advice and nationwide service.

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Dedpfxjx Tgr Te Aggekt Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 1995, functionality: fully functional, turning diameter over cross slide: 267 mm, spindle bore: 76 mm, center height: 228 mm, center width: 1,500 mm, quill stroke: 229 mm, quill diameter: 75 mm, total length: 3,030 mm, total width: 1,200 mm, total height: 2,000 mm, rotational speed (max.): 1,600 rpm, rotational speed (min.): 20 rpm, overall weight: 2,300 kg, Conventional lathe, center high 228 mm, between centers 1500 mm, bore Ø 76 mm, 16 speed 20 - 1600 rpm, motor 9,3 kw, camlock 8'', dimensions 310x120x200 cm, weight ca. 2300 kgs; equipement: pneumatic chuck SCHUNK ROTA Ø 315 mm, coolant device, 3-jaws chuck Ø 315 mm, several jaws, live center, tool post PARAT WD with toolholders, steady rest, drilling chuck, lamp, manual, cabinet Dodpeypud Uefx Aggjkt

Condition: used, Modular milling cutter Module 8 20 degrees Length 1800 mm Dkodpfx Agodklt Negjt Diameter 120 mm Inner diameter 40 mm

Condition: like new (used), functionality: fully functional, Year of construction: 2024, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: EVO, controller model: EVO 4 AXIS 15", number of rollers: 4, roller (top) diameter: 300 mm, roller diameter: 300 mm, roller length: 3,100 mm, working width: 3,000 mm, working height: 1,250 mm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 30 mm, sheet thickness stainless steel (max.): 25 mm, overall weight: 17,000 kg, total length: 5,500 mm, total width: 2,000 mm, total height: 2,100 mm, power: 18.5 kW (25.15 HP), input voltage: 400 V, number of digital displays: 4, warranty duration: 12 months, Equipment: cone bending device, documentation/manual, emergency stop, hardened rollers, swiveling upper roller, 4roll hydraulic plate bending machine rated capacity 3000x35 mm MODEL MG M3035 , used year 2024 machine as new with warranty included Planetary dual pre-pinch Performance Capacity: Plate width 3000 mm plate thickness rolling 30 mm pre-bend 25 mm minimum rolling diameter ID 350 mm max open width plate feed 3100 mm special top roll reduced size 300 mm to achieve rolling ID 350 mm Power electric motor 18.5kw on hydraulic unit Vac 400/50 -480/60 Installed configuration Hardened rolls high surface strength Conical plate rolling, cone bending Electric console remoted on wheels with joysticks and readout CNC programmable 4 axis controller touch screen 15” Setup virtual infinite rolling programs with teach-in mode and cad/cam operator interface --- Dkjdpfx Agjy Tbf Iogst Hydraulic motorized driven the central rolls Pre-pinch load adjustable for pre-bend Drop-end top roll front open unloading closed shells Re-rolling system for welded shells calibration. Safety and emergency stop Manuals and schematics machine dimension 5500x2000x2100 mm -weight 17ton --- Additional accessories available with the machine See layout drawing in enclosed nr.1 central support hydraulic 2.2 ton capacity to support large shell dia up to 4,5 meters id nr.1 side support hydraulic left side 2.2 ton double arm nr. 1 side support hydraulic right side 2.2ton double arm