Tugger

Clark GT 50E

Condition: excellent (used), UNLOADER (SINGLE-CAGE) - Vacuum system with its pump Hnsdpjcggy Ssfx Abvei - Top holding bar deplacement (pivoting) of 180° - Horizontal-longitudinal bars (rocker arms) for the vacuum cups supporting - In-side lifting table, surface with motorized-rollers - Front-side sliding door (or metal grid) to out-feed the stack of the panels - Separated electric and command panel - Out-side rollers way (on ground) to out-feed pile of panels from the Unloader - Out-side motorized rollers table (which brings panels to the Unloader), with also cross motorized conveyor belts (at 90°) - Working capacity (cycles/min): 12-15 - Min/Max panels thickness mm 10 - 40 - Min dimensions of the panels mm 250 x 320 (estimated) - Max dimensions of the panels mm 1200 x 3000 - Total installed motor power KW 10

Condition: new, Year of construction: 2026, - Capacity 1.2 mm Hnsdpfx Ajgg Nrkjbvsi - Extension 250 mm - With 8 sets of rollers

Condition: new, Year of construction: 2026, PREMIUM MODELS ARE CHARACTERIZED BY HIGH RIGIDITY AND MAXIMUM PRECISION OF RESOLUTION WORKING IN FULL INTERPOLATION IN EVERY X, Y, Z AXIS. The machine has an "Innovation Opinion", which makes it easier to co-finance the purchase from EU funds. A high-class CNC milling machine designed for material removal, due to a whole range of configurations, it is used in many industries: industrial, electronic, welding, carpentry, advertising, etc. These are efficient and precise machines equipped with friendly CNC control systems, thanks to so they can be easily operated by both experienced and novice operators. Training included in the price at our headquarters! Hedpfx Ajg Ngixebvoni MACHINE AVAILABLE ON STOCK! Technical parameters Spindle 5.5kW / 18000rpm. inverter, air-cooled Workspace 2100x3100 mm (up to 2680 x 3600 mm) Maximum spindle height 350mm Control DSP Software resolution 0.001mm Software INCLUDED Power 400V Weight 1450 kg Machine dimensions 2680 x 3600 x 2200mm Table height 715mm Vacuum pump 7.5kW Negative pressure 440mbar Guides linear Transfer rack (Z Axis - ball screw) Axis drives hybrid servo drives WARNING! The machine is equipped with the function of remembering the last G-code track. In the event of a power failure or interruption, it restarts from the last point without losing time or material. Optional equipment Vacuum pump: Becker KVT 3.140 129 m3/h The highest class safety barriers: Optional top-quality light barriers available. The safety zone determined by the sensors does not allow you to enter the machine's working area. A set of barriers ensures the safety of the operator. Z-axis gate height up to 450 mm UCANCAM V11 software (possibility to import files from Corel, Autocad). File import/export, editor and insertion of these text. Tool set: cutters, drills, holders. *Unloading and placing the machine on the customer's side. Equipment Air-cooled spindle, premium version Hybrid servo drives Elevated gate in the Z axis by 350 mm Vacuum table - 4 independent vacuum sections + T-groove table for manual material clamping (handles included) Vacuum pump 5.5 kW included in the price Tool measurement sensor included Software included Tools, collet set, leveling feet and other accessories DSP control - digital data processing The machine is equipped with the function of remembering the last G-code path - in the event of a failure or power interruption, it starts working from the last point without losing time and material. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: ready for operation (used), Year of construction: 2019, controller manufacturer: ABB, This Yaskawa Motoman AR1440 was manufactured in 2019. A robust welding robot, it offers precision and efficiency for your welding needs. Consider the opportunity to buy this Yaskawa Motoman AR1440 welding robot. Contact us for more information. Additional equipment • Robot arm specialized for welding • Single axis rotator • Rotating device holder disc of positioning equipment • Support page • Automatic welding head cleaning equipment • Automatic TCP checking and correction equipment Hnjdpfex D Nxbox Abvei • Seam detection sensor • Arc sensor seam tracking system integrated into the robot control • Complete safety system (without exhaust system) Extra Information Machine still under power

Condition: new, Steel structure measuring 7 m x 16 m (extendable), column heights: 4.176 m (higher) and 3.338 m (lower). In our other listings, we offer structures with higher columns: 5 m (higher) and 4.17 m (lower), as well as various lengths, available with or without wall purlin brackets. All materials are available immediately from stock, allowing clients to inspect them prior to purchase and to commence construction quickly, without the risk of advance payments. Hsdjychl Espfx Abvsni Our structures are hot-dip galvanized, providing optimal corrosion protection.

Condition: good (used), Year of construction: 2015, We at Binici MB GmbH also have other industrial robots in-house. Hsdpfxewxxxvj Abvoni All our robots are fully functional (with complete accessories). We are at your disposal for good advice

Condition: used, Year of construction: 2001, Baffle width: 4000 mm. Baffle height: 1000 mm. External dimensions: 4600 x 1500 mm. 2 x 1.5 kW motors. Total nominal flow rate: 7000 m³/h. Right and left exhaust nozzles with 300 mm diameter. Hnjdpfxjvvizkj Abvsi Storage location: Garbsen

Condition: as good as new (ex-display), Year of construction: 2011, Used storage tank made of steel according to EN 12285-1 (with test certificate) double-walled, for underground storage of fuel oil and diesel fuels, 1 dome (alternatively 2 domes possible). Capacity: 100,000 liters diameter: 2.900 mm length: approx. 15.750 mm Weight: approx. 18,800 kg In addition, we can also equip our tanks with the following accessories: - Leakage monitoring with under- and overpressure leak detector - Dome shaft with shaft cover in walkable or traversable drive-over design - Partition walls (as multi-chamber tank) - Interior coatings (e.g. 2-component epoxy resin), partial or full linings - Content and level measuring devices as well as control and regulation technology Hedei Enxdspfx Abvoni - Electric tank heaters - Pumps for heating oil, diesel, biodiesel or gasoline - Dispensers for diesel, biodiesel and gasoline - with complete tank data acquisition on request - External tank insulation with PU foam Tank is cleaned inside and outside coating is overhauled and checked with 14 kV. A cost-effective delivery with our own truck is possible. Just tell us the delivery place, you will get the exact freight cost immediately. If you need any further information, just give us a call or send us an e-mail. Trade-in and purchase of tanks/containers is possible, just contact us. Delivery time after arrangement! We have such tanks of course also in the following sizes constantly in stock: - 10,000, 13,000, 16,000, 20,000, 25,000, 30,000, 40,000, 50,000, 60,000, 80,000 liters.

Year of construction: 2013, condition: used, Features: * Used telescopic belt conveyor. * Condition: fully functional with traces of use * Ideal for fast material transport * Professionally disassembled and packed * Incl. feet Hnjdpfxoiuqcwe Abvoi * Incl. control cabinet * 3 pieces in stock * Price per piece Technical data: Manufacturer: VanDerLande Year of manufacture: 2013 Model: TTB-800- 4x16 Belt direction: loaded and unloaded Color: anthracite gray Total length retracted: 5.550 mm Total length extended: 16.000 mm Total width: 1.500 mm (incl. control cabinet) width: 1.220 mm belt width: 800 mm Condition: good (used) belt type: smooth / black Conveying height: 1.100 mm Own weight: 3.300 kg Two speed levels adjustable. Telescopic belt conveyor The telescopic belt conveyor is ideally suited in the picking zone to interlock machines or workstations and to optimize the internal process flow. During transport, the telescopic belt conveyor can convey sensitive and differently sized totes, boxes or other packaging and item units to the loading or delivery point and also serves, for example, as a connecting route in front of or between production and processing machines. It also enables efficient parts transport in the plant and warehouse and is used to convey considerable conveying volumes and distances. Customized solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopic conveyors for loading and unloading your goods, we are your competent partner! We will be happy to prepare your individual offer or advise you on design or installation issues. Simply let us know your requirements and the local conditions. Take advantage of our many years of experience and our excellent network of specialists. For companies in a wide range of industries, such as: Logistics, pharmaceutical industry, trade or the electronics industry, we have already successfully realized projects. Together we will work out ways to optimize your process and material flow in a cost-effective and sustainable way. We can even offer you fully automatic sorting technology or supplementary components such as picking racks or containers.

Year of construction: 2020, condition: refurbished (used), Dear customers! Our experience has shown that the communication by e-mail usually drags out everything unnecessarily. We would like to help you quickly, but it is better to spend three minutes on the phone than three days writing e-mails back and forth. TSWi 20.20 Dry splash wall Dimensions: 2000 x 2000 mm W X H Fan is built into the wall Air capacity: 7,200 m³ / h Motor: 1,50 kW ex-proof exhaust air pipe: 400 Ø mm depth: 900 mm Double filtration: paper filter + Paintstop filter mat over Terminal strip (+150,- EUR net) Options/additional price for: Hedpfx Asfr T Eqsbveni transition angular to round: 150,- EUR net Paintstop filter mat terminal strip: 150,- EUR net side baffle plates with hinge: 590,- EUR net Pictures may vary. We can also offer you complete spraying rooms with supply air system, heat exchanger, supply air ceiling, piping etc. Just contact us.