Used Fz 0 for sale (87,621)

Condition: used, maximum load weight: 2,000 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,675 mm, loading space width: 1,515 mm, loading space height: 30 mm, Gross weight: 2,600 kg, high-loader, open platform, overrun braked, rear tipper with pump, cordless screwdriver included. Loading height: 700 mm. Errors and prior sale excepted. Nwedpfxjym Ih Uo Abdjc

Condition: used, maximum load weight: 930 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 01/2023, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,560 mm, total height: 895 mm, Gross vehicle weight: 1,300 kg, high loader trailer, with overrun brake, 100 km/h, rear tipper, equipped with BAST-Ing PumpFast cordless drill pump. Errors and prior sale excepted. Nwodpfxsym Ig Rj Abdoc

Condition: used, maximum load weight: 615 kg, overall weight: 750 kg, axle configuration: 1 axle, first registration: 01/2026, loading space length: 2,011 mm, loading space width: 1,100 mm, loading space height: 350 mm, A1 GW2640818, * Unique, torsionally rigid aluminium chassis for safe driving characteristics * 4 recessed, foldable lashing eyes mounted in the side wall for secure load securing * Side walls made of anodised aluminium hollow profiles, rear foldable, with recessed latches Nsdpfx Aoym Ihhsbdewc * Folding front wall * Loading height 550 mm Errors and prior sale reserved

Condition: used, maximum load weight: 1,115 kg, overall weight: 1,350 kg, axle configuration: 1 axle, first registration: 01/2023, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, A2 GW260153953, 100 km/h shock absorbers factory-installed * Unique, torsion-resistant longitudinal frame chassis for safe driving performance * Hollow section construction, welded and fully hot-dip galvanized Axles, for braked versions: AL-KO brake system Nwjdpfx Asym Ihnsbdec Jockey wheel: Reinforced, automatic jockey wheel for secure parking of the loaded trailer, load capacity 500 kg * With maneuvering handle Load securing: 6 folding lashing recesses, flush-mounted in the floor frame profile * 4 lashing rings under the loading area Side panels: Aluminum hollow-section, anodized, v Subject to errors and prior sale, not refurbished

Condition: used, maximum load weight: 1,995 kg, overall weight: 2,600 kg, axle configuration: 2 axles, first registration: 02/2026, loading space length: 2,760 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,569 mm, total height: 1,029 mm, Total weight: 2,600 kg, high-loader, open box, overrun braked, rear tipper with hand pump. Errors and prior sale excepted. Nodpfjym Ig Djx Abdswc

Condition: used, maximum load weight: 930 kg, overall weight: 1,300 kg, axle configuration: 1 axle, first registration: 02/2026, loading space length: 2,300 mm, loading space width: 1,510 mm, loading space height: 300 mm, total width: 1,560 mm, total height: 895 mm, A11 GW 2612343 GVW: 1,300 kg, high-loader, overrun braked, 100 km/h, rear tipper, with BAST-certified PumpFast cordless screwdriver pump Spinlook Errors and interim sale reserved. Nwsdpfx Abjym Igksdec

Condition: used, maximum load weight: 880 kg, overall weight: 1,300 kg, axle configuration: 2 axles, first registration: 04/2007, next inspection (TÜV): 09/2026, * Advertising trailer with tarpaulin body * Gross vehicle weight reduced from 2,600 kg to 1,300 kg * 1 previous owner Since 1972, your reliable partner for all matters relating to automobiles and commercial vehicles in 28832 Achim, at Bremer Kreuz. NutzfahrzeugZentrum Behnke constantly offers around 200 vehicles, including vans, commercial vehicles and construction machinery! We continuously provide attractive financing options at favorable special rates. If you are interested, we would be happy to prepare a customized offer for you! Nwjdpfxsw Ua Ene Abdjc We are interested in part-exchanging your commercial vehicle/construction machinery. If you require a new TÜV inspection, we are happy to provide you with an offer from our partner workshops. Please note: our offer generally does NOT include a new TÜV inspection. Delivery of your 'new' commercial vehicle is available through our external partners at an additional charge. The details provided in listings, on the Internet, price tags, and pictures are non-binding descriptions and do not constitute guaranteed features. The seller assumes no liability or warranty for typographical or data transmission errors. Stated features must be checked separately if necessary. Subject to error and prior sale.

Condition: good (used), Year of construction: 2014, Parts shown by hand not come. Technical data shown on pictures. Nwjdpjyk E Dbofx Abdjc

Condition: good (used), Year of construction: 2014, Technical details shown on pictures. Nsdpjykufhsfx Abdjwc Parts shown by hand not come.

Condition: used, Year of construction: 2005, x-axis 3000 mm y-axis 1200 mm z-axis 750 mm Nedpfoycxc Ijx Abdswc Control S 840 D working area 3600 x 1200 mm feed - longitudinal/cross 0- 75000 mm/min feeds vertical 0- 70000 mm/min spindle turning speed - stepless 100- 40000 U/min spindle motor 6 kW b-axis 285 ° c-axis 520 ° total power requirement 25 kW weight of the machine ca. 5 t dimensions of the machine ca. 5,2 x 2,3 x 2,5 m

Condition: good (used), BAZ with integrated automation and palletizing, Fanuc control, 12 tool stations, HSK 32, 15,000 rpm, 4th axis, changeover table, pneumatic vices, extraction, chip conveyor, Knoll coolant system, additional coolant nozzles (KSS). Nwodow Rru Hspfx Abdoc

Condition: ready for operation (used), Year of construction: 2011, X-axis: 300mm, Y-axis: 250mm, Z-axis: 250mm, rapid traverse (X/Y/Z): 40/40/60m/min, chip-to-chip time: 1.5s, clamping surface dimensions: 2x 550x300mm, max. spindle speed: 15,000/min, torque: 23Nm, tool holder: HSK-A32, number of tools: 12, tool changer: CHIRON basket changer, control: GE Fanuc Series oi-MC. An on-site inspection is possible. Nwsdpfx Aew T Su Sobdjc

Condition: good (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 520 mm, travel distance Z-axis: 630 mm, Equipment: chip conveyor, Long-bed pendulum machining Control: 3-axis CNC path control, Siemens 840 D (E305-1) TECHNICAL DATA Working area X-axis 2600 mm Y-axis 520 mm Z-axis 630 mm Pendulum operation 2 x 860 mm Table clamping surface 3440 x 570 mm Automatic tool changer Number of tools 40 Tool holder (DIN 69871) SK 40 Nwedexwwc Uspfx Abdsc Tool change time 2.0 sec Max. drive power 18.5 kW Speed range up to 10,500 rpm EQUIPMENT/ACCESSORIES - Automatic tool changer ATC 40 - Long part machining/pendulum machining (center partition not included) - Splash guard enclosure with sliding doors, electrically secured, incl. machine light - Coolant unit with high-pressure pump and paper band filter Tank capacity 500 l, normal pump 200 l/min at 1.5 bar High-pressure pump 50 l/min at 20 bar, incl. double switch filter - Through-spindle coolant supply (IKZ) - Chip conveyor with ejection height 1050 mm - Rinsing gun - 1 NC rotary table with chuck - 1 hydraulic tailstock - 1 clamping bridge - Electronic handwheel - Mounting elements - Documentation

Year of construction: 2008, condition: ready for operation (used), Pneumatic pressure: 6bar, connected load: 26.92kW, weight: 400kg, with documentation. Nsdpfxolvu Rue Abdswc

Condition: new, Year of construction: 2026, Sliding saw Robland FZ 400 EL Voltage 400V Nwedolk Duaopfx Abdjc Three-phase main saw motor S6 4 kW (3x400V) Scoring machine motor power 0.75 kW Z4 anodized sliding table 420 x 3200 mm Cutting length 3500 mm max. saw blade (without equipment) 400 mm, max. 350 mm with scorer Graduation 120 x 20 mm (without dial) Cutting height 90°: 125 mm, 45°: 90 mm Cutting speed 4000 RPM Weight 780 - 880 kg

Condition: used, Year of construction: 1999, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, torque: 57 Nm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1999 Control: Heidenhain TNC430 PA with portable hand control unit Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±110° C-axis ±300° Clamping table Length x Width x Height: approx. 4,500 x 2,000 x 400 mm Longitudinal T-slots 18H12 T-slot spacing 250 mm (Shown zero-point clamping plates and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 18 kW Spindle speed: max. 15,000 rpm Torque: 57 Nm Tool holder: HSK 63 F Tool clamping: hydraulic Linear axis drives Feed rate X, Y, Z axes: approx. 20 m/min Connection data Nwsdpfx Aox Ifdkjbdoc Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Machine footprint without control cabinet: approx. 6,000 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 15,000 kg Additional equipment - 12-position tool changer - External minimum quantity lubrication - TT140 touch probe Condition of the machine Fully operational, machine is supplied without enclosure and must be enclosed by the purchaser in accordance with CE regulations.

Condition: used, Year of construction: 1997, functionality: fully functional, travel distance X-axis: 3,000 mm, travel distance Y-axis: 2,360 mm, travel distance Z-axis: 1,000 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 15,000 rpm, rapid traverse X-axis: 20 m/min, rapid traverse Y-axis: 20 m/min, rapid traverse Z-axis: 20 m/min, type of input current: three-phase, rotational speed (min.): 1,500 rpm, rotational speed (max.): 9,000 rpm, overall weight: 15,000 kg, Equipment: rotational speed infinitely variable, Initial commissioning: 1997 Control system: Heidenhain Working ranges X-axis approx. 3,000 mm Y-axis approx. 2,360 mm Z-axis approx. 1,000 mm A-axis ±90° Clamping table Length x width x height approx. 4,500 x 2,000 x 400 mm T-slots longitudinal 18H12 T-slot spacing 250 mm (The zero-point clamping plates shown and additional clamping devices are not included in the scope of delivery!) Milling head Spindle power: 12 kW Spindle speed: max. 9,000 rpm Tool holder: SK40 / ISO40 Linear axes drives Feed speed X, Y, Z axes: approx. 20 m/min Connection data Power requirement: approx. 20 kW Frequency: 50 Hz Voltage: 400 V Main fuse: approx. 63 A Dimensions, weights Space required by machine (without control cabinet): approx. 5,600 x 3,500 mm Required height: approx. 4,050 mm Total weight: approx. 14,000 kg Condition of the machine Fully functional, the machine is delivered without enclosure and must be enclosed in a CE-compliant manner by the buyer. Note: The tool changer, vacuum table including pump, and extraction unit can be purchased at an additional cost. However, they are NOT included as standard equipment with the machine! Nwodpsx Iuguofx Abdsc

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, For sale is a fully functional machining center of the Chiron type FZ 08 W. Nwedpfx Absx Swg Sjdec

Condition: good (used), Year of construction: 2007, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, type of input current: three-phase, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Year of manufacturing: 2007 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Dimensions : 1500 x 2600 x 2300 [mm] Nwedpfxox U U Hbo Abdec Weight : 3400 [Kg] More information available upon request.

Condition: ready for operation (used), Year of construction: 2000, Main Drive Spindle speed range 45000 Spindle motor power 6 kw Movement X-Axis Movement 2450 mm Y-Axis Movement 1400 mm Z-Axis Movement 800 mm This 5-axis GEISS FZ 2000 x 1000 was manufactured in 2000. It features a robust CNC milling machine capability with X-axis travel of 2450 mm, Y-axis of 1400 mm, and Z-axis of 800 mm. The milling spindle supports a maximum speed of 45000 rpm with a power of 6 kW. Consider the opportunity to buy this GEISS FZ 2000 x 1000 CNC milling machine. Contact us for more information about this machine. Application Types Njdpfjx D E U Sjx Abdjwc Milling

Condition: good (used), Year of construction: 2006, operating hours: 9,911 h, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, rapid traverse X-axis: 75 m/min, rapid traverse Y-axis: 75 m/min, rapid traverse Z-axis: 75 m/min, nominal power (apparent): 17 kVA, total height: 2,300 mm, total length: 1,500 mm, total width: 2,600 mm, overall weight: 3,400 kg, spindle speed (max.): 30,000 rpm, spindle nose: HSK40, number of slots in tool magazine: 40, input voltage: 400 V, Equipment: documentation/manual, CNC machining center CHIRON FZ08 KS Magnum High Speed Plus (HSP) TECHNICAL CHARACTERISTICS: Nwsdpex Iiw Ijfx Abdsc Year of manufacturing: 2006 CNC control : FANUC 18i-MB5 Number of axes : 7 Stroke X axis : 450 [mm] Stroke Y axis : 270 [mm] Stroke Z axis : 310 [mm] Traversing feeds X, Y and Z axes : 75000 [mm/min] Max. bar diameter in turning spindle : 32 [mm] Main spindle max. speed : 8000 [rpm] Main spindle max. power : 12 [kW] Angular A axis stroke : 360 [°] A axis indexing precision : 0.001 [°] B axis swivelling stroke : -20° / +115 [°] B axis indexing precision : 0.001 [°] Spindle type : HSK40 Max. spindle speed : 30000 [rpm] Tool changer magazin number of stations : 40 Part turnaround by robot (6th side machining) : Yes RS232 Interface : Yes Total power required : 17 [kVA] Supply voltage : 400 [V] Number of running hours : 9911 [h] Dimensions : 1500 x 2600 x 2300 [mm] Weight : 3400 [Kg] EQUIPMENT INCLUDED: x1 RENISHAW TS27R tool probe x1 spindle cooling unit x1 parts catcher x1 coolant tank x1 unit for 6th face machining (gripping system not included) x29 tool holders type HSK40 BIG KAISER x10 collets type F37 SCHAUBLIN x1 washing gun x1 3-color status light x1 maintenance manual x1 electrical diagrams manual x1 operator's manual x1 programming manual Price on request, loading on truck included. Possibility of shipping Worldwide. The information on this page has been obtained by the best of our ability. Therefore, its accuracy can not be guaranteed Machine similar to brands such as Okamoto, ELB, GER, Tacchella, Karstens, Jones & Shipman, Jung, Favretto, Blohm. Internal and external grinding (ID/OD) also to be considered. Surface grinder, lathe, machining center, milling machine.

Condition: excellent (used), Year of construction: 2006, operating hours: 14,300 h, functionality: fully functional, machine/vehicle number: 414-46, Year 2006 with Fanuc Series 18i-MB5 Country of manufacture: CE - Germany Net machine weight: 3,400 kg Dimensions: 185x259x250 cm TECHNICAL SPECIFICATIONS Travel X / Y / Z: 450 / 270 / 310 mm Acceleration X / Y / Z: 0.7 / 0.7 / 1.0 g Rapid traverse X / Y / Z: 40 / 40 / 60 m/min Spindle speed max.: 15,000 rpm Tool interface: HSK A 40 Milling capacity in St 60: max 60 cm3/min Drilling capacity in St 60: max Ø 16 mm Threading: up to M12 Tool magazine / positions: 24 – special version with 40 on this machine Tool change time: approx. 0.8 sec Chip-to-chip time: approx. 2.2 sec 5-axis version Nedpfoxqmwbjx Abdswc NC rotary tilting table: +/- 100° Rotary plate diameter: 100 mm Grid drill pattern: M6 x 50 mm 4th axis speed: 40 rpm 5th axis speed: 60 rpm Direct measuring system for 4th and 5th axes: +/-20’’ / +/-20’’ Distance spindle nose – table surface: 170 – 450 mm Maximum workpiece weight: 6 kg Technical information is provided without engagement and subject to errors or omissions.

Condition: excellent (used), Year of construction: 2005, operating hours: 9,100 h, functionality: fully functional, machine/vehicle number: 414-38, TECHNICAL DATA Travels  ; X / Y / Z 450 / 270 / 310 mm. Acceleration ; X / Y / Z 0,7 / 0,7 / 1,0 g Fast speeds ; X / Y / Z 40 / 40 / 60 m/min Spindle speeds max. 15’000 min-1 Tool connection HSK A 40 Milling cap. in St 60 max 60 cm3/min Drilling cap. In St 60 max dia. 16 mm Threading up to M12 Magazine / tool posts 24 – special on this one 40 Tool changing time abt. 0,8 sec. Time clamp-to-clamp abt. 2,2 sec. 5 axes execution NC Table tilting rotating +/- 100° Circular plates 100 mm « Rasterbohrbild » M6 x 50 mm Rotations 4th. axis 40 min-1 Rotations 5th. axis 60 min-1 Nsdpfx Askx Ek Tobdswc Direct measuring system for 4th. And 5th. axis +/-20’’ / +/-20’’ Distance spindle nose – table surface 170 – 450 mm Max transportable weight 6 kg errors and omissions excepted-data given without obligation

Condition: used, mileage: 298,000 km, power: 96 kW (130.52 HP), first registration: 12/2007, fuel type: diesel, overall weight: 3,200 kg, next inspection (TÜV): 07/2026, color: yellow, gearing type: mechanical, emission class: euro3, number of seats: 3, total length: 5,290 mm, total width: 1,904 mm, total height: 2,778 mm, Year of construction: 2007, Equipment: ABS, air conditioning, electronic stability program (ESP), 1st owner. From a German fleet, major corporation. Due to several company restructurings, there are 4 entries in the registration certificate. TÜV valid until 07/2026. Full service history exclusively at VW (maintenance performed seamlessly up to 248,000 km). Long wheelbase with extra high roof and tall rear wing doors. The vehicle was never used for intensive delivery operations, but always as a workshop van. Partition wall, sliding door on the right. WÜRTH shelving system with vice and boxes for small parts. 3 seats. ABS and ASR. ESP. Air conditioning (requires refill, currently not working). Driver airbag. Nodpfx Aeiq Ewvobdowc Powerful 2.5 liter TDI engine / 5-cylinder, 130 hp. Runs perfectly. Green emissions sticker (EURO 3 with PMK 4 directly from the factory). 6-speed manual transmission. Registered maximum speed: 158 km/h. Unladen weight: 2,167 kg. Gross vehicle weight: 3,200 kg. Favorable registration as "closed box van". The Bulli is equipped with good winter tires bearing the snowflake symbol, in compliance with current legal requirements. The T5 is ready for immediate use. The Bulli runs smoothly and is absolutely reliable. Considering its mileage, it remains a very well-functioning vehicle. The T5 was routinely replaced by a new vehicle and performed perfectly until its last day in service. No defects are known or anticipated for a new main inspection (MOT/TÜV). Normal signs of use appropriate for its age (nothing excessive, no major damage). This offer applies exclusively to businesses or public authorities. Subject to prior sale and errors excepted at all times. Net price: €4,700! (In case of export, we reserve the right to retain a deposit for the 19% VAT until receipt of the final export certificate.)

Condition: good (used), CHIRON FZ 08 KS Magnum is a 5‑axis machining center engineered for precision, high accuracy and reliable production. Travels X450×Y270×Z310 mm; drilling 12 mm; tapping M8. Tool magazine 24 pos., tool Ø max 47 mm (100 mm free), length 160 mm, tool wt 1.2 kg. Spindle HSK‑A40 0–36000 rpm; spindle motor 7 kW; rapid 75 m/min; 3×400V 50Hz; air 6 bar; installed power 14 kW (19 kVA); machine ≈3400 kg; dims 2308×1405×2447 mm. Features: tool‑break control, RS232, switch‑cabinet air‑con, status light. Delivers tight tolerances for automotive, aerospace, medical, watchmaking. Nwedsxx U Nzspfx Abdsc