Forklifts with side loader

Combilift MR4

Condition: new, functionality: fully functional, Year of construction: 2023, load capacity: 4,500 kg, lifting height: 6,000 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, color: yellow, fuel: electricity, Brand: Combilift Fedpfot Dpp Hsx Abujpc Type: MR4 Year of construction: 2023 Capacity: 4,500 kg Lifting height: 6,000 mm Lifting mast: Triplex

Condition: new, Year of construction: 2024, travel distance Y-axis: 600 mm, travel distance Z-axis: 450 mm, - Simple graphic programming, including GoTo function in manual mode - Machining lengths from 3000 - 16500mm, depending on version - Free programming in DIN/ISO (G commands) - 2-axis interpolation for X/Y-axis, including arcs - 3-axis linear interpolation (X/Y/Z) - 3-axis interpolation (X/Y/Z) for helical milling and thread milling - Rapid traverse X-axis = 30 m/min., Y-axis = 25 m/min. Main spindle BT 40 Fodorb Afajpfx Abujpc - 5 bearings, diameter 110/60 mm (3x angular contact ball bearings 7212, 2x deep groove ball bearings 6212) - Suitable for both high axial and radial loads = drilling and milling - Maximum tool length : 290 mm - Maximum tool diameter : 88 mm Guide X-axis - 2 pieces 45 mm linear guides with 2 full ball bearing carriages each X-axis drive - helical precision rack, travel 3,000 to 16,500 mm Y-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Y-axis drive - Ball screw diameter 25 mm, travel 600 mm Z-axis guide - 2 35 mm linear guides, each with 2 fully spherical carriages Z-axis drive - Ball screw diameter 32 mm, travel 450 mm Standard version Automatic tool changer with 10 positions, mounted in the machine column

Condition: new, functionality: fully functional, Year of construction: 2024, load capacity: 4,500 kg, lifting height: 7,550 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, color: yellow, fuel: electricity, Equipment: cabin, Brand: Combilift Type: MR4 Year of construction: 2024 Capacity: 4,500 kg Fpjdpfx Ajt Hflisbujc Lifting height: 7550 mm Lifting mast: Triplex

Condition: like new (used), functionality: fully functional, Year of construction: 2022, operating hours: 56 h, load capacity: 3,000 kg, lifting height: 5,952 mm, fuel type: electric, mast type: triplex, fork length: 1,200 mm, color: yellow, fuel: electricity, Brand: Combilift Type: MR4 Year of construction: 2022 Capacity: 3,000 kg Lifting height: 5,952 mm Fedpfx Ast Dpmfebujpc Lifting mast: Triplex

Condition: used, Tenoning spindle 1 St. Number of milling agregates 4 St. Spindle diameter 50 mm control Weinig, PC-Nexus # 2764 Weinig Unicontrol 6 with NC spindles ----- Machine will be cleaned and completely checked before delivery Technical data summary (please enquire about any additional accessories included) Item 1: Cross-cut saw ----- > Electronic cross-cut saw, infinitely adjustable horizontally > Number of tools: 1 piece > Spindle speed: 2,800 rpm > Spindle diameter: 40 mm > Max. tool diameter: 400 mm > Motor power: 3.0 kW > Laser aiming light for detecting the saw section > NC length stop, mounted on slot table included Positioning of the cross-cut saw integrated in the control system. > Length 3500 mm Item 2: tenoning spindle ----- > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 3500 rpm > Spindle diameter: 50 mm > Max. tool diameter: 320 mm > Motor power: 11 kW Item 3: 1st profiling spindle (synchronous spindle and counter-rotation) > Position: vertical right > Number of tools: 1 pc. > Tool clamping length: 120 mm > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Max. tool flight circle: 232 mm > Motor power: 7.5 kW Item 4: 2nd profiling spindle ----- > Position: vertical right > Number of tools: variable, infinitely variable adjustment NC axis > Tool clamping length: 320 mm > Vertical spindle stroke: variable, infinitely variable adjustment 254 mm NC axis > Spindle speed: 6000 rpm > Spindle diameter: 50 mm > Tool flight circle max.: 232 mm > Motor power: 11 kW 2 feed rollers opposite the spindle, axially pneumatically controlled, 2 positions Rung guide consisting of: Guide ruler in the stop (area of ??synchronous spindle), Rung support bar from above in the area of ??profile milling unit vertical right and profiling spindle. Pos. 5: Profile milling unit horizontal top ----- > Clamping length: 40 mm > Spindle diameter: 40 mm > Motor power: 3.0 kW > Speed ??5,850 rpm > Tool flight circle max. 130 mm > Axial adjustment range 30 mm, 8 positions using pneumatic turret > Radial adjustment range 125 mm, 8 positions using pneumatic turret Pos. 6: 3rd profiling spindle (fitting spindle) ----- > Position: vertical right > Tool clamping length: 160 mm > Axial adjustment range 115 mm, 8 positions using pneumatic turret > Radial adjustment range 100 mm, 8 positions using pneumatic turret > Spindle speed: 5,850 rpm > Spindle diameter: 40 mm > Max. tool flight circle: 210 mm > Motor power: 3.0 kW Other features Fpedpfx Asvu Hfqjbujc ----- > online-capable > rebating device for tear-free rebating > double parts package > return conveyor for 1-man operation: tilting belt > screen control > inclined window device > electronic angle display for inclined windows > industrial PC, PC control/NEXUS > Weinig type production program > without processing tools No original images available yet. Images show identical machines from our archive. ----- Price of the above-mentioned machine upon request! ----- Optional with additional charge: EUR 6.500,00 Note on used tools: We currently ha...

Condition: good (used), Year of construction: 2000, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design - Work table 1800 x 600 mm with 4T-slots - Boom travel 1050 mm - SK 40 drilling spindle with tool clamping device - Infinitely variable speed programming - Infinitely variable quill feed via three-phase servo motor - 2 T-slots 18 mm on the machine base at the rear - 2 T-slots 18 mm on the left machine base frame - Thread cutting device - Central lubrication - Coolant device - Machine light - CE marking - Safety device - USB interface Dimensions and travels Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 410 Distance spindle bottom edge - min mm 70 Table top edge max. mm 680 Distance spindle bottom edge - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Worktable height mm 900 Cutting values Drilling capacity into solid St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100 % duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feed rates stepless mm/min 5 - 2000 Accuracy Positioning accuracy X-, Y-axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Fpsdpju Aa I Ssfx Abusc Processor: 32-bit CPU Screen: TFT flat screen, backlit, easy to read from all sides legible from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental measurements, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Tool management: max. 500 tools Subroutine technology: yes Machining cycles Standard software options: Programming in dialog, 38 zero offsets, rotation and mirroring, teach-in for X, Y, Z, restart in program with selection functions for targeted entry Zero point determination: Cycles for determining zero points by manually probing the workpiece for by manually probing the workpiece for: - any clamped rectangular parts - any clamped round parts - Mediation of cast and flame-cut parts - Angular position detection for round parts by touching reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: ready for operation (used), For sale: conveyor belt as shown in the photos, approximately 8 m in length. Belt width: 0.3 m. Possibility of transport. Fpjdpfsr Nvx Uex Abusc

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Fpedpfx Asxcyz Rjbuec Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock.

Year of construction: 2015, condition: excellent (used), VMC 3 axis AMS super dart year of production 2015 Control FANUC Fpodpfx Abskvpnmjujc MACHINE CAPACITY X - Axis Travel mm 600 Y - Axis Travel mm 450 Z - Axis Travel mm 500 Dist. From Spindle Face To Table Top mm 235 - 735 Table size mm 900 x 450 Max. load on table kgf 400 max spindle speed 15000rpm BT30 high cooling through the spindle automatic tool changer 20 tools weight machine 4500kg with machine chip conveyor with pomps low hours machine

Condition: used, Year of construction: 2016, machine/vehicle number: 0605-240010, FICEP Flex FRC 1201 coping robot The Ficep FRC 1201 coping machine is part of the latest process in automatic CNC controlled thermal coping process. Fpedpfx Astwm Ubobusc This modern CNC-controlled coping robot system is suitable for fast thermal cutting and notching of profile types H / U / L / flat and square tubes. The steel profile is positioned in the system at the position to be cut using a pulling gripper measuring carriage via the roller conveyor. A robot arm with the cutting units (oxyfuel or plasma) cuts the profiles at the selected position. The cut or notched finished components either fall into the collecting tray or are pushed out of the system by the measuring arm. Thermal cutting units: This Ficep profile support notching system Flex FRC 1201 is equipped for thermal cutting with oxyfuel and/or plasma. A Hypertherm HYPERFORMANCE PLASMA HPR 260 XD suitable for material thicknesses up to 32 mm is used as the plasma power source. Thicker material thicknesses or phase cuts greater than 32 mm are cut with the oxyfuel cutting unit. Transport system: On the infeed side in front of the Ficep Flex FRC notching system is a chain drag cross conveyor with a length of 11,150 mm. The profiles (components) can be conveyed in both directions. The profiles are then transported into the machine on a stable roller conveyor with a gripper measuring carriage. The system is designed for 12 m long profiles and therefore has 12 m roller conveyors with a roller conveyor width of 1. 300 mm on the infeed side and 12 m on the outfeed side.300 mm. 4 chain tractors with a length of 6,450 mm are available after the notching system to transport the finished components to the outfeed side. Mitrol CNC control and Pegaso software: The system is controlled by a modern CNC control system from Mitrol. The reliable CNC control is from Ficep's own manufacturer Mitrol with the Pegaso software including remote maintenance option and data transfer interface. Torit DCE filter unit The filter unit for the dirt extraction is from Donaldson Torit DCE Safety: via fence and light barriers Max. profile cross-section: 1,220 mm. Profile cross-section : 1,220 x 600 mm Min. material length : 2,500 mm Working height : 865 mm Weight: 7000 kg Weight of cover firing unit : 1200 kg This modern Ficep Flex FRC 1201 coping robot system is in very good condition.