Z Conveyor Z Conveyor Injection molding

die magnetprofis

Condition: new, Year of construction: 2026, Overbelt magnetic separator, magnetic tape, overbelt magnet, magnet separator, metal detection, demetallization plant Our all-round talent - overbelt magnetic separator is for sale Permanent overbelt magnetic separator TYPE PEM1200 Hfsdpfxshupkmj Aqisk 1200x550x200mm ===== 4x ring screw for suspension PU conveyor belt endless GB30 black matt Magnet dimensions: 700x230x120mm 7 x T20 studs high-frequency welded High-quality triple aluminum construction Inner bearing lubrication for 10,000 operating hours. Degree of protection: IP-55 0.18 KW three-phase gear motor GEMOTEG 2 pcs. side protection plates V4A Magnetic core encased in soft iron, so that a very high permeability can be guaranteed. Underbody tightly closed and sealed with stainless steel plate and pole pieces.

Condition: ready for operation (used), Year of construction: 2023, clamping force: 2,500 kN, screw diameter: 55 mm, overall weight: 8,400 kg, Hydraulic injection moulding machine manufactured in 2023. This HAITIAN MA 2500 III features a clamping force of 250 tons and a platen size of 850 x 850 mm. The machine includes an impressive injection pressure of 1850 bar and a screw diameter of 55 mm. If you are looking to get high-quality injection moulding capabilities, consider the HAITIAN MA 2500 III machine we have for sale. Contact us for further details regarding this machine. • Clamping unit • Opening force: 165 kN • Platen size: 850 x 850 mm • Opening stroke: 540 mm • Tie bar distance: 580 x 580 mm • Max mould height: 580 mm • Min mould height: 220 mm • Ejector stroke: 150 mm • Ejector force: 62 kN • Min mould dimensions: 410 x 410 mm • Injection unit • Euromap classification: 1000 • L/D ratio: 20 • Shot volume: 570 cm³ • Effective injection volume: 519 g • Injection rate: 281 g/s • Plasticizing capacity: 47.7 g/s • Injection pressure: 1850 bar • Screw speed: 180 rpm • Screw stroke: 240 mm • Carriage force: 99 kN • Pump motor power: 37 kW • Heater power: 21.45 kW • Oil tank capacity: 340 L • Dimensions • Machine size: 6.19 x 1.60 x 2.42 m • Control • Controller: KEBA 2985 – CP053 • Features: • 15” colour touchscreen • Euromap 67 robot interface • USB memory • 200 mould memory • Cycle history • Alarm tower • RFID login/password • Multilanguage interface • Process graphs • Maintenance pages • Metric / imperial selectable • Included options / extras (machine-integrated) • Bimetallic screw + barrel • Masterbatch dosing interface • Hydraulic radial extraction • Festo air blow system • 12-zone PSG central lubrication • 4-way flowmeter • Robot interface • Included screw H 3 zones • CE certified work cell Additional equipment • Robot included: HILECTRO V-1300ID Cartesian Robot (2023) • Type: 3-axis servo Cartesian robot • Suitable for: 380T to 530T presses • Travels: X 2000 mm / Y 880 mm / Z 1300 mm • Max extractable weight: 12 kg • Power: 400 VAC / 50-60 Hz • Precision: 0.1 mm • Robot weight: 530 kg • Included: Touchscreen controller, USB programs, pneumatic gripper, vacuum cups, conveyor ready • Peripherals included: FORMAX E3 Monofase Hopper Loader (2 units) • Hopper capacity: 3.0 L Hsdpfxsy N Sqmj Aqiefk • Power: 1150 W • Inlet diameter: 40 mm • Capacity: 70 kg/h • Voltage: 230 V • Weight: 13 kg each

Condition: new, Year of construction: 2026, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals Hsdpfed Dy S Rjx Aqisfk L x W x H: 1200 x 550 x 200mm Magnetic L: 700mm W: 250mm Gear motor: 0.22KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: new, Year of construction: 2024, functionality: fully functional, Permanent overbelt magnetic separator TYPE PM1200 Manufacturer: the magnet professionals L x W x H: 1200 x 550 x 200mm Hfodpfxsd Dy Ugo Aqiok Magnetic L: 700mm W: 250mm Gear motor: 0.37KW Inner bearing lubrication for 10,000 operating hours. Protection class: IP-55

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, GF Machining Solutions FORM X600 Year of manufacture 2019 - Factory revision 2022 C-shaped design, fixed table with lowerable container Travel paths (X/Y/Z): 600 x 400 x 500 mm Distance between table and quill: 200-700 mm Max. workpiece size: L x W x H = 1200 x 800 x 350 mm Max. workpiece weight: 2000 kg Integrated C-axis for rotation, indexing, and erosion (rpm = 0-100 rpm) Pneumatic chuck of your choice (Erowa/3R Systems) 80 amp ISPG generator Best achievable surface finish Ra 0.08 µm AC FORM HMI user interface 15" LCD color screen, mouse or touchscreen, keyboard, and hand control Incl. 3R-Systems Workpartner WPT1+ - 150 electrode positions - 10 pallet positions Net weight of the system: 5504 kg Machine dimensions: 1790 x 2860 x 3100 mm We will clean, service, and test the machine upon receipt of the order. Optional: - Commissioning and instruction - Transport and installation - Cooling unit Hfedpfxswh Sigj Aqiok - Dielectric

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2021, Aluminum flat belt conveyor 1,600 × 300 mm – NEW from stock (year of manufacture 2021) For sale is a like-new aluminum flat belt conveyor in an industrial design. The conveyor comes from our stock, has not been used in production, and is therefore in very good condition. Thanks to its high-quality aluminum construction and powerful ELVEM geared motor, the conveyor is ideally suited for professional use in production, warehousing, packaging, mechanical engineering, and automation technology. Technical data: Year of manufacture: 2021 Condition: New from stock Conveyor length: 1,600 mm Belt width: 300 mm Robust aluminum profile construction Green PVC conveyor belt with cleats High-quality ELVEM geared motor Three-phase connection (400 V) Smooth and low-maintenance operation Application areas: Mechanical engineering Packaging technology Warehousing and conveyor technology Automation Assembly workstations Feeding of workpieces Transport of individual parts, plastic, metal, or packaging components Advantages: ✅ New from stock ✅ Immediately available ✅ Robust industrial quality ✅ Low-maintenance aluminum construction ✅ High-quality industrial geared motor ✅ Compact design ✅ Ready for immediate use An inspection is possible at any time by prior appointment. Scope of delivery: Hfedpfezhx Duex Aqiok Aluminum flat belt conveyor ELVEM geared motor PVC conveyor belt with cleats Net price, plus 19% VAT.

Condition: like new (used), functionality: fully functional, Year of construction: 2025, The system was manufactured for a customer project but was not put into operation due to a subsequent change in the installation requirements. The conveyor belt is in new condition and is immediately available. This provides the opportunity to purchase the system at a significantly lower price than the new price. Aluminum angle conveyor with substructure, including adjustable feet and machine feet for leveling uneven surfaces. Horizontal section: 750mm Rising section: 2,300mm Inclination angle at the bend: 60° Height of the horizontal section: 250mm Conveyor belt length measured on the floor: 1,900mm Discharge height: 2,200mm Design: Aluminum construction - 2x profile reinforced 90x45mm - Full-surface wear plate, 2.0mm, galvanized Drive roller + deflection roller, S235 steel, welded and machined Ø100x520mm, crowned, shaft fixed with tension bearings Drive: Gearmotor, 0.55KW, speed 0.53m/sec Connection 230/400V, 50Hz, protection class IP54 Drive ready for connection up to the motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 10/2 0+005 PU including wave edge PU petrol matte Conveyor belt width: 500mm 2 pieces of wave edges, 50mm high, 25mm wide, high-frequency welded 21 pieces of T-40 studs, 300mm long, approx. 300mm spacing Belt material: 2-layer, particularly dimensionally stable in the transverse direction In the bend area, the belt is guided on both sides with 2 pressure rollers each. The belt is designed with a border-free zone of 70mm on both sides. Due to the wave edge on both sides, the usable width of the conveyor belt is reduced: Hodpfszfi A Asx Aqijfk Usable width: 300mm, as follows: (Top view) Transverse arrangement: 70+25+5+300+5+25+70mm Belt guidance via PVC wedge strip on the running surface, profile - 10x6mm - Including recess in the wear plate - Including sliding joints in the drive and deflection roller Inspection possible after consultation Price is net, plus 19% VAT.

Year of construction: 2024, condition: new, The mini pallet shredder is ideal for shredding small and/or dismantled pallets. Hjdpfx Aqspahwvsiefk

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. Hfsdpfjfiwg Tsx Aqisk A feeling of security for both sides! Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics External dimensions: 1059mm x 1077mm Internal dimensions: 970mm x 975mm

Year of construction: 2020, condition: new, Aluminum flat conveyor belt with substructure Working height 900mm, height adjustable using machine feet Hfjdpfx Aqegggkpjiek 1500mm flat Dimensions: approx. 1500 x 500 x 105mm Aluminum construction: Conveyor belt width with welded corrugated edge PVC conveyor belt with T cleats. Green conveyor belt, 2-ply, particularly cross-stable, endlessly welded with step connection * antistatic due to threads in the fabric of the running side Drive: motor approx. 0.18 kW, speed 0.4 m / sec. * controllable with frequency converter Connection 220 / 400V, 50Hz protection class IP54 Drive, motor control optional

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor incl. mobile substructure horizontal area 1,100mm Rising area 1,500mm Pitch angle in bend 60° Total conveyor length: 1,750mm Discharge height: approx. 1,600mm Height of the horizontal: 300mm (feed height) Conveyor belt width 500mm PU conveyor belt including driver and corrugated edge petrol matt Drive: motor 0.25KW, speed 0.2m/sec Hfedsi Igikopfx Aqiek Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 4x freely steerable transport rollers with parking brake 2 pcs. corrugated edges 50x35mm 11 pieces T-50 studs welded on in the middle - 481mm pitch 2-layer particularly laterally stable Usable width 290mm, results as follows: Transverse arrangement -70+30-5+290-5+30-70mm

Year of construction: 2020, condition: new, machine/vehicle number: DMTT1000x800mm, With our work protection made of acrylic glass, you increase protection against unwanted transmission of bacteria and viruses. A feeling of security for both sides! Protect yourself and your fellow human beings from infection! The infection protection walls give employees and customers more security when dealing with one another without impairing communication. Product characteristics Hedpofiwf Esfx Aqisfk External dimensions: 1064mm x 867mm Internal dimensions: 974mm x 775mm

Year of construction: 2021, condition: new, Complete solution for the transport of bulk materials and demetalization of magnetic metal contaminants. Aluminum angled conveyor belt including substructure horizontal area 2000mm (adjustable) Rising range 4500mm (customizable) Freely selectable angle in the bend: 30, 35, 40 or 45 ° Construction: height adjustable Construction for suspending the overband magnetic separator DMPM1200 included Conveyor belt width 400mm (adjustable) We deliver our conveyor belts in PVC, PU or rubber. PVC conveyor belt including carrier and corrugated edge Drive: Motor 0.25KW (adjustable), speed 0.3m / sec Connection 220 / 240V, 50Hz, protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Hfjdehh Ay Sspfx Aqijk Wave edge: 40x35mm T-20 studs - 400mm pitch 2-ply particularly cross-stable Our core competence lies in delivering exactly what the customer really needs. We work together with our customers to develop customer-specific, individual solutions and deliver corresponding systems from our own production. Feel free to contact us by phone to find a suitable solution for your application. Conveyor belt, conveyor belt system, discharge belts, belt conveyor, magnetic separator, overbelt magnetic separator, recycling, wood chips, plastic, metal-free metal detection, neodymium, overbelt magnet, magnetic belt separator

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Hedpfx Aju Eki Ssqiefk Drive: Electric

Condition: new, Year of construction: 2025, machine/vehicle number: 2022042210, Aluminum angled conveyor belt with substructure Conveyor belt length: 1,500mm flat + 3,000mm rising Hodpfoh Ellzox Aqiefk Pitch angle in bend 45°C Height of the horizontal top edge approx. 200mm PVC conveyor belt Conveyor belt EM 15/2 0+17 PVC green Belt width 500mm 31 pcs. T40 studs welded - pitch 300mm * antistatic due to threads in the fabric on the underside endlessly welded with stepped finger connection 40mm sidewall high-frequency welded on both sides * edge-free zone on both sides for tape guidance in the incline Lateral arrangement: -70+35-5+280-5+35+70 Full-surface underlay sheet Drive: Motor approx. 1.1KW Belt speed approx. 0.3m/sec * optionally controllable with frequency converter Connection 220/400V, 50Hz protection class IP54