Mobile shredding plant

Doppstadt AK 510 Biopower

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Gujdpfxjxx Tige Agpjb Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: excellent (used), Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 093, overall weight: 30,000 kg, transport width: 2,500 mm, Doppstadt AK630 with very few operating hours. Used as a demonstration machine. Godpfxewx Schj Agpoub

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: Gsdpfexx N Dgox Agpoub - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: used, Year of construction: 2022, operating hours: 4,240 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Gsdoyhckmjpfx Agpoub Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, power: 242.71 kW (329.99 HP), DOPPSTADT AK 330 S Diesel engine: 330 HP Equipped with: Screen basket (hole site: 120 mm), radio remote control, original vehicle papers. Service was done. New tyres in April 2026. In very good and working condition. Godpfxjy Duuwe Agpsub

Condition: refurbished (used), Year of construction: 2012, operating hours: 7,340 h, Doppstadt DW 3060K Büffel - Year of manufacture: 2012 - Operating hours: 7,340 - Engine: Mercedes Benz, 430 HP - Roller with 21 teeth - Crawler chassis - Remote control - Weight: 30,000 kg Gjdpfx Ajyhyuyegpoub Machine is overhauled and immediately available.

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: - Unlimited length - Width up to 1800 mm Gsdpoxmvplefx Agpjub - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality

Condition: new, We would like to offer you shafts designed for machines such as PRO.S1, MRW 2.65, MRW 2.75. - Paddle shafts - Concrete shafts - Star shafts - Trapezoidal shafts - Cassette shafts Guedpjx Hx Erefx Agpjb PROTECHNIKA is a company with 21 years of history that has specialized in the production of spare parts and complete recycling lines since its inception. In recent years, we have expanded our portfolio to include the manufacturing of grinding shafts for slow-speed shredders. Through the implementation of automated welding processes and proprietary production technology, we have minimized production times while ensuring consistent, high quality. Grinding shafts are a serial product, which, among other benefits, allows us to cooperate with machine manufacturers on an OEM basis. What sets PROTECHNIKA apart from the competition? It's simple! - Certified 3.1 materials - TUV SUD Rheinland quality certification - ISO 9001 - Automated welding processes / ISO 15613 / ISO 15614 - ISO 9606-1 qualified welders - ISO 9001:2015 - ISO 14001 - An independent design department capable of meeting any customer requirement - Our own RESEARCH AND DEVELOPMENT CENTER Customer relations are of utmost importance to us, because their satisfaction is our success!

Condition: reconditioned (used), Year of construction: 2014, functionality: fully functional, power: 375.1 kW (509.99 HP), year of last overhaul: 2026, Mobile shredder DOPPSTADT AK 535 compact Fine shredding basket; hole-size can be agreed. Foldable discharge conveyor with magnetic head pulley (magnet roll) Twin-drive (separate drives for infeed roller and scraper floor) Hydraulically self propelled drive (for moving on site) Radio remote control Gjdpfx Agsy A Iv Eopeub

Condition: ready for operation (used), Year of construction: 2014, functionality: fully functional, For Sale: Operational Pellet Production Line (Capacity 2.5–3 t/h) Used factory equipment is available for purchase due to a capacity upgrade. The machinery is currently operational and can be inspected daily between 08:00 and 15:00. Technical Specifications: *Three-pass Rotary Dryer: Ø2300 x 12000 mm / 7.5 kW *Hot Air Boiler: 2 MW power output *Dryer Piping + Cyclones: Primary cyclone (Ø1700) + Secondary cyclone (Ø1700) *Main Dryer Fan: 75 kW *Hammer Mill: 110 kW (power unit included) Gedpjy Ed Szjfx Agpeub *Screw Conveyor: Located under the mill, 2.2 kW *Bucket Elevators: Three units available (heights: 6m, 8m, and 11m). Made of galvanized sheet metal with 1400ml buckets; 2.2 kW motors. *Transport Fan: For secondary grinding, 30 kW *Muench RMP520 Pellet Press: Equipped with two 75 kW motors (power unit included) *Automatic Lubrication System: For the pellet press *Roller Temperature Monitoring: Integrated for the press Details & Availability: Condition: Manufactured in 2014; excellent condition. Location: Ivanjica, Serbia. Ownership: Crown Forest d.o.o. Availability: Ready for pickup at the end of June 2026. For all additional information, please call.