Single shaft shredder

Doppstadt DW308 CERON

Year of construction: 2012, condition: excellent (used), Alfa Laval Centrifugal pump Type LKH 85/240, 25,0 kW , Lsdpfxjhck S Ee Al Njac Stainless Steel. Used! Good condition! Inlet: 6" - Outlet: 6"

Condition: used, Year of construction: 2022, operating hours: 4,561 h, functionality: fully functional, Basic Package AK565: Central axle trailer chassis with 2 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EC directive 50 mm EC drawbar eye incl. slip-on coupling Tyres: 385/65 R22.5 Hydraulically adjustable support leg Splash guards (inner and side-mounted fenders) Permissible total weight: 19,000 kg MTU diesel engine 6R1300, 390 kW at 2,000 rpm, complies with EUROMOT V emission standard Exhaust discharged upwards Load-dependent material feed control incl. automatic reversing of scraper floor Fuel tank, 450 L Feed roller: length 1,690 mm, diameter 510 mm, fitted with bolt-on tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips - Dopplock system Standard: Flail tip “Streusel plus” Centrally arranged lubrication strips Electric pump for operating cylinder functions (e.g. raising/lowering the support leg and opening/closing the rear basket, folding/unfolding the rear conveyor, releasing the drive) when engine is stationary 24 V electrical control system Separate control panel at the rear of the machine Hydraulically folding fine shredding basket “Multimesh” (mesh sizes between 30 - 280 mm, gradations on request) incl. one-piece rear flap Scraper floor with 32 slats Chain drive for feed roller and scraper floor Complete radio remote control Drive preparation Rear discharge conveyor, 4 m long, 1,800 mm wide “classic” Anti-magnetic centre section on the discharge conveyor Reinforcement plates (Hardox) on both sides of feed hopper sidewall Lajdpoyhckmofx Al Nec Fire extinguisher Acoustic start-up warning Doppstadt telematics system Finish: RAL2011 deep orange Optional Equipment: Hydraulic drive 600 L fuel tank Flail tip C1 “Bear Paw” with carbide insert Rear discharge conveyor 4 m, belt width 1,800 mm, lowerable Neodymium magnetic pulley incl. chute Separate drive for feed roller and scraper floor (“Twin Drive”) Duomatic coupling Smooth impact plate Fine shredding basket Delivery date by arrangement

Condition: used, Year of construction: 2000, functionality: fully functional, Trimming line consisting of: centering table H42 (factory-overhauled EWD 2000), chipper canter FZ 3 (factory-overhauled EWD 2000), converted to servo cylinder; infeed BNK with square timber centering, BNK 200/6, year of manufacture 2000; board separator ASV, year of manufacture 2000; hydraulic unit; central lubrication. Without electrical control equipment. Dismantled, chipper canter and BNK stored in the hall. Lsdpfx Asx Tpzdol Noac

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, overall weight: 30,000 kg, rotor diameter: 800 mm, rotor length: 1,200 mm, power: 250 kW (339.91 HP), Universal granulator, impact granulator. Drive power: 250 kW, control cabinet with frequency converter (year of manufacture 2019). In 05/2023, the rotor shaft was replaced with an exchange shaft, including new bearings and seals. Rotor length: 1200 mm Rotor diameter: 800 mm Lodew Am Nqjpfx Al Noac Number of knives/rotor: 36 pcs Number of knives/stator: 4 x 6 pcs 2 hydraulically swiveling stators, each with 2 rows of counter knives. Fine adjustment of the knives is performed hydraulically while the machine is running. Function 2: Coarse adjustment of the stators by 180° Hydraulic pusher Bearing temperature monitoring Central lubrication system for rotor bearings Net weight: 29,800 kg Year of manufacture: 2004, overhauled in 2025, all wear parts were renewed. The granulator has been overhauled and workshop tested, and is delivered ready for connection. Testing/demonstration available by appointment upon request.

Condition: new, Year of construction: 2025, MAX MAMMUT 400-500-600: High speed log profiling line (up to 600 mm in diameter) for the production of prisms, "river use", "trieste use" beams, boards in general and semi-finished products for pallets. FULLY HYDRAULIC MACHINERY Laodpfx Alshpbths Nec Minimum diameter of logs 120 mm Maximum diameter of logs 600 mm Minimum working length mm 1.800 Maximum working length mm "Infinite" (∞) Tool holder shaft diameter 60-80 mm Cutter diameter mm 300 Feed speed mt / min. 5 - 70

Condition: used, Year of construction: 2021, operating hours: 3,304 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Laodsxx Tigepfx Al Noc Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: new, Year of construction: 2024, SJET Series, multi-purpose industrial part washers which are very easy to operate. Rotary table washer. Rotary table parts washer. Perfect parts washing systems for degreasing and maintenance purpose cleaning. Operating Principle : After the basket is loaded to the machine hot water mixed with cleaning detergent is sprayed to the rotating basket. Specially mounted stainless stell nozzles and rotational movement of the basket provides perfect cleaning for all parts inside the basket. Water is filtered before returning to the tank which provides extended lifetime for detergent and minimise cost. SJET series reduces consumption of water and detergent and help you protect the environment Lajdpfod I Aw Eex Al Nsc SJETs are manufactured using AISI 304 stainless steel. Different basket dimensions and capacities are available. Rinsing and drying options are available. Different lid types are available. Rotary basket washer Please feel free to contact for other details and options.

Condition: excellent (used), Year of construction: 1993, functionality: fully functional, power: 242.71 kW (329.99 HP), DOPPSTADT AK 330 S Diesel engine: 330 HP Equipped with: Screen basket (hole site: 120 mm), radio remote control, Lodpfxoy Duuwo Al Neac original vehicle papers. Service was done. New tyres in April 2026. In very good and working condition.

Condition: excellent (used), Year of construction: 2010, operating hours: 2,000 h, functionality: fully functional, machine/vehicle number: 093, overall weight: 30,000 kg, transport width: 2,500 mm, Doppstadt AK630 with very few operating hours. Used as a demonstration machine. Ledpfx Aljwx Schj Noac

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume. Lsdpfx Aleqmi Irj Neac