Mobile shredding plant

Doppstadt Methor Kette

Condition: good (used), Year of construction: 2022, operating hours: 600 h, functionality: unexamined, Equipment: Methor chain basic package without shredding system - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding funnel with path sensor and automatic control - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Special equipment: Shredding system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Gbjdpfsvrz Rvsx Abush Frame for overband magnet Overband magnet Irrigation

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator Gjdpfoinwumjx Abusbh -Manufacturer: Fein, Balancer spring balancer -Load capacity: 1-3 kg -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/200/135 mm -Dependent weight: 3 kg/piece

Condition: good (used), Year of construction: 2020, operating hours: 881 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Gbjdpfx Abovnmmzsush Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: used, Year of construction: 2021, operating hours: 200 h, functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Gbsdpfovnq Trox Abueh Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: new, Year of construction: 2025, functionality: fully functional, power: 55.4 kW (75.32 HP), overall weight: 2,050 kg, fuel type: diesel, color: original, axle configuration: 1 axle, operation weight: 2,050 kg, empty load weight: 2,050 kg, fuel: diesel, Technical data: Gbodov Evx Uepfx Abueh Logs up to 24 cm Infeed width 300 mm Basic weight approx. 2050 kg Year of construction: 2022 4 cylinder Hatz turbo diesel engine With common rail technology and diesel particulate filter Meets the EURO 5 emissions standard. On single-axle chassis for 80 km/h, Power Control System Water-cooled 4-cylinder Hatz turbo diesel engine 55 kW (74.8 hp) with common rail technology and DPF Fully galvanized single-axle chassis (80 km/h) Towing device with overrun brake Front support wheel Rear parking support Lighting in accordance with StVZO (impact-protected) Heavy-duty tires 205/65 R17.5 (EX) Hydraulic adjustment of the feed speed and thus the chip size Chipper knives can be resharpened several times for a long service life (approx. 10x) PowerGrip feed roller, 300 mm wide, with hydraulic feed Particularly grippy, aggressive and even feed, due to which there is one oil motor per roller Outlet pipe with adjustable spreading flap, pivoting Discharge pipe on ball bearing slewing ring Relevant machine parts with noise insulation Features: Engine and chassis: Water-cooled, Stage V 4-cylinder Hatz common-rail turbo diesel engine with DPF, delivers 55.4 kW (75.3 hp). Automatically acting industrial overrunning clutch between engine and chipper disk to protect engine, bearings and shaft. Fully galvanized, corrosion-resistant single-axle chassis for speeds of up to 80 km/h with TÜV approval. Robust, fixed sheet steel mudguards. Device for support wheel at the front and parking support at the rear. Height-adjustable towing device with overrun brake and soft-dock ball coupling or DIN towing eye. Lighting in accordance with StVZO with impact-protected components. Heavy-duty tires 205/65 R17.5. Fuel level indicator for easy monitoring. EU homologation. Housing/hopper/blow-off pipe: Rotatable chipper housing with adjustable input angle of 270°. Folding feed hopper with a minimum feed depth of 1,500 mm. Fully galvanized hopper flap for durability. Hopper dimensions (inside): Width = 1,160 mm, height = 1,040 mm. Pivoting discharge pipe with adjustable spreading flap. Discharge pipe on ball bearing slewing ring for flexible alignment. Noise insulation on relevant machine parts such as the chipper hood and discharge pipe. Emergency stop button on top of the hopper and on the side of the hopper flap. Chipping unit: Safety circuit in accordance with EN 13525. Chopping disk with a diameter of Ø 800 mm and a thickness of 40 mm. Closed blade system for quick and safe blade changes. Infinitely adjustable chipper knives, resharpenable several times for a long service life. Horizontal counter blade 4-fold and vertical counter blade 2-fold usable for long service life. Winding protection on the main bearing of the chipper disk. Hydraulic feed: Feed control with its own hydraulic circuit. PowerGrip feed roller (300 mm wide) with hydraulic feed for non-slip and even material transport. Parallel guidance of the top roller for even feeding without tilting. Hydraulically adjustable feed speed to control the size of the wood chips. Fill level indicator for the hydraulic oil tank.

Condition: used, machine/vehicle number: 12625, Rotor diameter: 800 mm Rotor width: 1500 mm 6-knife rotor Gsdpek Rfvkefx Abusbh 4 rows stator knives Inlet cross section approx. 820 x 1500 mm Drive motor: 160 kW

Condition: excellent (used), Robland 3200 silver line format saw with a trolley Gjdpov S Hy Aofx Abujbh scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: new, Year of construction: 2025, machine/vehicle number: 421159679, Mobile jaw crusher on crawler track VULCANO crusher is the most modern and compact machine of the last generation in the 25 tons category. The feed hopper with roadworthy loading dimensions and the possibility of folding the conveyor belt, which allows transport also on trailers, make it versatile in transports and equally fast in start-up. From the arrival at the site to the moment of the start of the crushing operations, only the time necessary for warming up elapses. Equipped with the latest generation of control and operating systems, it is simple and user-friendly, and also environmentally friendly. The HCS (Hydraulic Crushing System) control system actively supports the automatic operation of the machine, guaranteeing it the highest profitability in terms of maintenance costs and productivity, making it incomparable. The structural reinforcement between the frame and the crusher gives the machine maximum robustness to stresses. The particular design of the supporting structure guarantees excellent access to all parts of the machine during maintenance operations. The GI CRUSHER VULCANO certainly offers convincing and incomparable performances both in operations on natural stone and in recycling, as well as for rentals. Production capacity: approx. 190 TO/H Patented HCS system Proportional distributor with \"Load Sensing \" for an optimization of the system and a reduction fuel consumption by approx. 30%. Pre-screening optional gap size hydraulically adjustable also during crushing operation fast blocking system with wedges and folding cylinders unloading height 2750 mm dust extraction system tank pump magnetic separator warranty 1 year up to max. operating hours from the start of operation of the equipment Technical data: Jaw crusher 830 x 580 mm crushing gap from 30 to 160 mm feed hopper 3,5 m³ - 1800 x 2970 mm grizzly feeder 770 x 2750 mm Main conveyor belt 800 x 8700 mm 4 cylinder constant speed diesel engine 82 HP/60 KW, exhaust stage V Control panel chain drive 400 x 2920 mm Weight: kg Transport length 10850 mm or 9170 mm with folding discharge belt Transport width:2520 mm Gjdpfx Abohd I Sbouebh transport height 3100 mm Further information Purpose: construction, Drive: caterpillar

Condition: used, L-TEC Inverter TIG Welding Machine Type Inverter TIG 200 DC TIG welding machine for direct current (DC) Serial No. 184548 Year of manufacture: approx. 1994 Output: 200 amps = 60% duty cycle 155 amps = 100% duty cycle Adjustment range: infinitely variable Gbsdpsdzqb Eofx Abueh Current type: DC (direct current) Mains connection: 400 Volt, 50 Hz, 32 Amp plug - 4-meter hose package with central connection and hand torch - with remote potentiometer (foot switch) - gas pressure regulator - DC only - HF ignition Space required (L x W x H): 850 x 480 x 740 mm Weight: approx. 150 kg The welding test shows very good results when welding stainless steel with direct current. Overall in good condition.

Condition: new, Year of construction: 2025, the SQUALO 615 multi-blade or multi-blade circular saw with single shaft is a technological machine, indispensable in a modern sawmill to optimize the production of sawn timber. moreover it is 2-in-1 as it can be configured as a trimming machine with 1 or more movable blades. ideal for the production of strips, squares, sawn timber, profiles, edged planks, prisms, boards, elements for pallets. Rollers / conveyor belt width 620 mm Width of infeed / outfeed conveyor rollers 620/720 mm Max saw unit width 590 mm Max cutting height (without pad) mm 150 (mm 125 Trimming machine) Min. Length working mm 800 Max width passage 800 mm Blades hole diameter mm 80 (mm 104 Trimming machine) Gsdpfx Abehpbxieujbh Circular blades diameter 250/470 mm (480 mm Trimming machine) Blade shaft speed rpm 3.800 Variable feed speed with ROLLS 3 - 36 m / min Variable feed speed with CARPET m / min 4 - 25 optional: softstarter start