Electric motor 2.2 kW 1400 rpm

Eco-Air AM100LS4

Condition: used, boring: 63 mm M 12x1,5 Fodpocn Tb Ejfx Al Sopn M 16x1,5 M 18x1,5 M 20x1,5 M 22x1,5 M 10x1 diameter: 160 mm roll width is different: 60, 70, 80 mm

Condition: new, Year of construction: 2026, - soft start / stop - pre-stretch tension - additional engine - height 2.4 m - ramp / platform - platform diameter 1.65 m - film stretch up to 350% - Strong chain drive - man-hour and pallet counter - regulation of wrapping speed 3-12 rpm - the ability to adapt the device according to the customer's needs - 230V power supply - Automatic return to the starting position Fpsdpfjr Hbflox Al Sjn ADDITIONAL FEATURES: - Very easy to use - Operating hours counter - Pallet counter - Cycle pause function - Stretching on the head modes and not on the palette - Adjustable wrapping speeds Pallet wrappers are designed for machine wrapping of goods stored on pallets with stretch foil. They are especially recommended where very high efficiency and low labor and financial costs in the packaging process are required, i.e. in distribution centers, warehouses, logistics centers, production plants, as well as in smaller companies. – increasing the efficiency of the packaging process – the ability to set the required parameters by machine and the high rotational speed of the wrapping plate makes machine wrapping much shorter than manual wrapping, and the employee during foiling can be involved in other activities, e.g. preparing or delivering another pallet, – repeatability of packaging – wrapping with a wrapper allows you to maintain an identical method of packaging for a specific type of cargo, repeatability of a once developed and appropriate method of packaging allows for safe storage and transport of goods, – load stability – the wrapper, thanks to the adjustment, allows you to adjust the wrapping method even to very diverse loads in a reliable way and guarantees the stability of the load on the pallet, which guarantees avoiding possible damage to the load.

Condition: new, TECHNICAL DATA: - Base area: 15,000 x 24,000 mm [other variants available] - Grid spacing: 5,000 x 6,000 mm - Top edge of floor covering: 3,340 mm - Clear height: 3,000 mm - Flooring: 38 mm chipboard P6, raw/white - Load capacity: 500 kg - Colour: RAL color of your choice - Condition: new The platforms can be expanded in the specified grid as standard. Other sizes and heights are available on request. Our team is happy to advise you! Scope of delivery: - Columns - Main and secondary beams - Bracing cross-members - Flooring - Fastening material PRICES: Variant I: Base area: 30 m² | Dimensions: 5,000 x 6,000 mm | €4,499.65 net, plus transport costs and VAT. Variant II: Base area: 60 m² | Dimensions: 5,000 x 12,000 mm | €7,393.50 net, plus transport costs and VAT. Variant III: Base area: 90 m² | Dimensions: 5,000 x 18,000 mm | €7,303.60 net, plus transport costs and VAT. Variant IV: Base area: 120 m² | Dimensions: 5,000 x 24,000 mm | €10,513.84 net, plus transport costs and VAT. Variant V: Base area: 60 m² | Dimensions: 10,000 x 6,000 mm | €13,707.36 net, plus transport costs and VAT. Variant VI: Base area: 180 m² | Dimensions: 10,000 x 18,000 mm | €19,027.30 net, plus transport costs and VAT. Variant VII: Base area: 240 m² | Dimensions: 10,000 x 24,000 mm | €25,003.69 net, plus transport costs and VAT. Additional configurations available. Optional accessories: - Railing - Flush wall connection - Staircase - Transfer station - Impact protection YOUR CONTACT PERSONS AT OUR COMPANY: - Tanja Henkelmann - Rainer Nürenberg - Oliver Kopp ⚙️ CUSTOM DESIGN & MANUFACTURING This platform system is an example from our standard range. Of course, we develop and manufacture your warehouse platform exactly according to your operational requirements – tailored to area, load-bearing capacity, platform height, and intended application. Fedpfx Aoxpiztjl Sepn Our planning department will prepare a custom, non-binding offer for you based on your specifications. Whether new construction, extension, or modernization of existing systems – we support you with expert knowledge and practical solutions. TRANSPORT & INSTALLATION We are happy to assist you with transport and installation of the goods. This item is available for collection. Delivery or shipment is available at an additional cost. The extra costs depend on the place of delivery and the size of the consignment, and can be specified individually on request. PAYMENT TERMS Payment terms will be agreed upon when placing the order. The price is to be understood as unit/net price or as stated in the description (plus VAT). You will of course receive an invoice showing VAT. ABOUT US The company DLK, located in Nordhorn, deals in new and used products for warehousing logistics, conveying technology, mezzanine floors, textile storage solutions, as well as in machinery for commerce, industry, and craft trades. We constantly offer attractive used machines from various manufacturers/brands at competitive terms. If you have any questions, please feel free to contact us at any time. ✅ Four wins – The success factors of DLK – Warehouse Technology | Levelmaker® | Logistics | Solutions

Condition: good (used), bench vice, metalworker's vice, parallel vice -Jaw width: 150 mm -Wingspan: 200 mm -Number: 2x vices available -Price: per piece Fedpfx Asddfh Esl Sepn -Dimensions: 490/340/H195 mm -Weight: 27 kg

Condition: used, Offer 35504 Technical data: - 7 pieces of ball-bearing drawers, each 90% extendable - Drawer size approx.: W 510 x D 600 mm each - Drawer heights: 1 x H 85 mm; 1 x H 65 mm; 5 x H 125 mm - No key available Fjdpfx Ajwzvlfel Sjpn - Required cabinet space approx.: W 650 x D 700 x H 1020 mm - Weight: 80 kg

Condition: new, functionality: fully functional, overall weight: 163 kg, fuel type: diesel, tank capacity: 16 l, color: white, output current: 11 A, output voltage: 400 V, output frequency: 50 Hz, type of output current: three-phase, nominal power: 6 kW (8.16 HP), nominal power (apparent): 7 kVA, total length: 900 mm, total width: 560 mm, total height: 800 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, number of cylinders: 1, cubic capacity: 498 cm³, fuel tank capacity: 16 l, insulation material: F, protection type (IP code): IP23, Diesel generator set GB8500VTS, brand new, available immediately from stock, minor paint damage possible. 84419 Schwindegg. SWITCHABLE BETWEEN 230 V (32 A) AND 400 V (16 A) The unit can be switched between single-phase operation with 230 V and three-phase operation with 400 V via the control panel. The VTS phase switching system enables the use of a single generator in both single-phase mode (230 V) and three-phase mode (400 V) with virtually no power loss. The key point: In a purely three-phase 6 kW generator, only approximately 2 kW is available per phase. This is often insufficient for a circulation pump, a deep well pump or a cooling system. With the GB8500VTS, the full power is available on one phase in single-phase operation, and the 32 A socket is designed accordingly. CONTROL PANEL Digital display HJ-502 for voltage, current, power, frequency and operating hours. Key switch, emergency stop, preheating button, rotary switch 400 V / 0 / 230 V. Connection for an automatic mains failure (AMF) module is available. GENERATOR AND ENGINE Self-excited synchronous generator with AVR voltage regulation, insulation class F, protection class IP23, designation according to ISO 8528-1. Single-cylinder diesel engine, air-cooled, four-stroke, direct injection, electric start, preheating device and decompression switch for safe cold start in winter. Diesel without bio-components, oil capacity 1.65 l, tank 16 l with fuel level indicator. DESIGN Soundproof canopy, 68 to 72 dB(A) at 7 m distance. Transport kit with 4 wheels and 2 handles. Dimensions 90 x 56 x 80 cm, weight 163 kg. DC output 12 V / 8.3 A. DELIVERY SCOPE Generator with built-in start battery, matching mating connectors for the 400 V and 230 V outputs, tool kit and user manual in German. No assembly required. Oil and fuel are not included. Warranty 12 months according to our general terms and conditions. Fpodpfszwwzwex Al Ssn OTHER MODELS FROM THE SAME WAREHOUSE GB8500: 7.5 kVA / 6.0 kW, air-cooled, purely three-phase 400 V, 11 A, single-cylinder, 16 l tank - same engine, the most affordable model in the series. GB85001Ph: 7.5 kVA / 6.0 kW, air-cooled, purely single-phase 230 V, 32 A, single-cylinder, 16 l tank. GB11000VTS: 9 kVA / 7.5 kW, air-cooled, switchable, 230 V, 32 A or 400 V, 16 A, single-cylinder, 30 l tank. GB13000: 12.5 kVA / 10 kW, air-cooled, purely three-phase 230 V, 16 A, two-cylinder, 25 l tank. GB13000VTS: 7.36 kVA or 12.5 kVA / 10 kW, air-cooled, switchable, 230 V, 32 A or 400 V, 16 A, two-cylinder, 25 l tank. GB50: 50 kVA / 40 kW, water-cooled, SmartGen, four-cylinder, 95 l tank. GB80: 100 kVA / 80 kW, water-cooled, SmartGen, four-cylinder, 165 l tank. Data sheets for all models available upon request. QUANTITIES AND BULK PRICES Larger quantities immediately available from stock. The price applies to single purchases. Container and complete deliveries possible. DELIVERY Pickup in 84419 Schwindegg by appointment. Shipping as individual items or by freight forwarder, freight costs to destination on request. Export to third countries possible. SELLER Geisberger Gesellschaft für Energieoptimierung mbH, Hassenham 4, 84419 Schwindegg. VAT ID DE 204232112 As a family-owned company, we have been building combined heat and power plants and emergency power systems since 1999 and answer technical questions ourselves from our location in Schwindegg, Upper Bavaria.

Condition: used, Second-hand machine Fjdpfx Aljzk Nv Ho Sopn Second-hand scroll saw from Budget, model BDS 1101 Motor power: 70 watts Motor speed: 1,440 rpm Availability: at short notice Location: Solingen

Year of construction: 2003, condition: used, tank capacity 160 l feed pressure 160 bar Fjdpfx Ajn Tvg Ejl Sjpn weight / kg

Year of construction: 1994, condition: used, hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, Fpsdpfx Aerc Ilksl Son -Manufacturer: Bucher, hydraulic unit from press brake HACO type PPES 30135 -Hydraulic pump: type QT43-020R -Engine: EMI 14.9 kW / 1460 rpm -Individual components: see photos -Dimensions: 970/420/H370 mm -Weight: 185 kg

Condition: used, functionality: fully functional, machine/vehicle number: PT1500, Wanted: De Jong PT1500 Passenger-Goods Lift For an ongoing project, we are urgently looking for a De Jong PT1500 passenger-goods lift. Required specifications: • Suitable for transporting both passengers and goods • Lifting capacity approx. 1,500 kg • 400 Volt drive • Robust, industrial-grade construction • Suitable for professional construction site use • Complies with current safety standards We are open to: • Used Fpodpfxex Spg Dj Al Ssn • Complete lift or set If you have a De Jong PT1500 available, we would appreciate your offer including price, condition, and availability. Please respond with photos and technical details.