Electric motor 11 kW 1460 Rpm

Elektrim SSg 160M-4

Year of construction: 2022, condition: as good as new (ex-display), Aluminum angled conveyor belt with substructure horizontal range: 3,000mm Rising range: 5,000mm Lead angle in the kink: 35, 40 or 45° Total conveyor length: - Drop height: - Height of horizontal: - Conveyor belt width 600mm (extendable) Drive roller + deflection roller Ø150x620mm S235 steel welded and machined Steel deflection roller stored in the kink and crowned overturned Aluminum profile construction 135x45mm reinforced PU conveyor belt DM 10/2 0+005 PU incl. corrugated edge petrol matt Drive: Motor 1.1KW, speed 0.3m/sec Pgsdji Igzfjpfx Adiow Connection 230/400V, 50Hz protection class IP54 Drive etc. ready for connection, motor 2 pcs. corrugated edges 80x45mm 39 pcs. T60 studs, pitch 401mm 2-layer particularly laterally stable Usable width 470mm, results as follows: Transverse arrangement -70+45-50+470+50+45-70mm

Condition: reconditioned (used), Stock - No.: 2553 1 used, partly overhauled and functionally tested Single-Screw Extruder, equipped with: Material hopper loader Extruder BATTENFELD Typ UNI-EX 1-75-25 B Screw - Ø 75 mm – 25 L/D, Cylinder Air-cooled Extruder-Motor 120 kW – DC ( overhauled ) Screw –speed up to 130 r.p.m. additional Temperature controllers for down-stream equipment Control-Board with melt-pressure sensor / Display. Inspectiuon visist / trial-run shortly by appointment in our workshop Wuppertal Germany possible. We can offer, installed to this extruder: Psdpeiyyndsfx Adijgw > screen-pack-changer > pelletizing ( strand, hot-face or waterring ) > other equipment Send us your inquiry. More extruder and complete pelletizing lines ex our workshop Wuppertal, send us your inquiry or visit us, you´re welcome

Year of construction: 2005, condition: ready for operation (used), Wielopła Brodpol WP-165 2W - machine in stock - Polish production - Year of production 2005 TECHNICAL PARAMETERS: - cutting width 380 mm - cutting height 165 mm - diameter 300 mm - four upper pulling years - pneumatic roller pressure - four lower pulling rollers - two rows of pawls - diameter of spindles 70 mm - spindle speed 3640 rpm - main engine 2 x 55 kW - total power of 114 kW - 500 mm horizontal clearance Machine dimensions: - length 220 cm Pgodpfx Asfum U Eodiow - width 180 cm - height 220 cm - weight 2,940 kg

Year of construction: 2023, condition: new, Cable stripping machine,wire stripper G.R.S. 12 Cable stripper Pjdpfx Adsi A Ixfoiegw This true monster can cut up to an incredible 120 mm in diameter! With 380 volts and 3 kW, this device is really built for industrial use. The heavy 210 kg of weight are therefore absolutely neccessary and of course it stands on their own two feet. The criterion for this machine: Super flexible in use with cable thicknesses between 2 mm and 120 mm. Technical data: Cutting speed: — Processing capacity: Ø 2 mm — Ø 120 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 210 Kg Dimensions in cm: 89 × 58 × 136

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW Pedpfeh Dwl Djx Adijgw 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request. Podpebqt Arofx Adiogw

Year of construction: 2003, condition: reconditioned (used), Stock - No. 2651 1 used underwater pelletizing unit, partially overhauled in 2023 Throughput up to approx. 450 kg/h depending on the material, consisting of: Type BKG ( Nordson ) Start-up valve with hydraulic station Granulator type A300 including die-plate and cutter bar, drive 4.4 kW by-pass system TVE 1000 ED pellet-dryer drive 4 kW incl. Agglomerate catcher Tempered water system with Pedpfx Aeiyyf Ijdijgw Water box 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15³/h heat exchanger Control unit - NEW Further UWP pelletizing units are available ex workshop in Wuppertal-Germany ( as Gala, BKG Nordson, Econ ) Available from the Wuppertal warehouse: complete compounding, pelletizing extrusion lines, with single-screw or twin-screw extruder.

Year of construction: 2004, condition: good (used), Manufacturer: Hein Lehmann Type: LF 2,0 – 6,30 / 30 ED Size: 2.000mm x 6.300 mm Decks: 1 Psdpfx Adjh Ty Tqeiegw Year of Manufacture: 2004 With Frame.

Year of construction: 2002, condition: reconditioned (used), Fully automatic finger jointing line: Type Doppel-Pack with automatic feeding With multiple crosscut saw With automatic stacking machine Specification: Wood input length: min. 150 mm max. 1000 mm average 400 mm wood cross-section: min. 20 x 40 mm max. 80 x 180 Wood exit length: 6030 mm max. Wood cross section Pjdpog D Ugkofx Adisgw with 10 mm tine size: Hardwood 120 cm² softwood 150 cm² Tine design vertical and horizontal Glue type. PVAC white glue, 2-sided glue application Electric power: Supply voltage: 400 V Control voltage: 24 V 50 Hz System completely wired up to the control cabinet. Tine length / possibly wood cross-section and glue type can still be adapted. Capacity: 6 milling tables/ min working height: 960mm table width: 600 mm glue application: double-sided application Technical parameters: Input material: Input length of parts (min. - max.): 150-1000mm Part width (min. - max.): 40-155 Part thickness (min. - max.): 20-80mm Working height : 960mm Bundle width: 600mm Glue application: double-sided application (on both sides of the

Year of construction: 1997, condition: excellent (used), Single shaft shredder form Weima Psdoivpttepfx Adijgw Model -WL6S Main motor -22kw