Gear Unit / Gearbox

Flender / Siemens B4 FH 10 A

Year of construction: 2023, condition: new, Cable stripping machine,wire stripper G.R.S. 12 Cable stripper This true monster can cut up to an incredible 120 mm in diameter! With 380 volts and 3 kW, this device is really built for industrial use. The heavy 210 kg of weight are therefore absolutely neccessary and of course it stands on their own two feet. The criterion for this machine: Super flexible in use with cable thicknesses between 2 mm and 120 mm. Technical data: Pedei A Ixfepfx Ah Uorf Cutting speed: — Processing capacity: Ø 2 mm — Ø 120 mm Motor power: 3000 Watts Voltage: 380 Volt Weight: 210 Kg Dimensions in cm: 89 × 58 × 136

Year of construction: 1996, condition: good (used), machine/vehicle number: 96.01112.1496, Stationary high pressure pump unit Hammelmann HDP 112 on base frame. Similar but no Kamat, Uraca, Woma. Pump type: HDP 112 Working pressure: 300 bar Delivery rate: 153 l/min. Drive speed: 1500 rpm. Psdpjhtnniefx Ah Uorf Drive power: 90 kW with VEM motor 90 kW 3~motor, IP55, with pressure regulating valve, with safety valve, with oil cooling system. dimensions LxWxH: ca. 2300x1000x1400 mm weight: approx. 1500 kg Year of manufacture: 1996 Condition: in good used condition.

Condition: as good as new (ex-display), Year of construction: 2011, power: 630 kW (856.56 HP), overall weight: 3,340 kg, ABB HIGH VOLTAGE INDUCTION MOTORS Motor Rotor Type 3-Phase Motor Power (KW:) 630 KW Pedpeqctpgefx Ah Usrf

Year of construction: 1996, condition: good (used), Weinig Unimat 23 four-side planer - German production - grooved top - year of production 1996 - pulling rollers in the table top Prodjh Dwl Dopfx Ah Usf TECHNICAL PARAMETERS: planed width 230 mm planing height 160 mm grooved top spindle diameter 40 mm 1 lower spindle 7.5 kW 2 right spindle 7.5 kW 3 left spindle 7.5 kW 4 upper spindle 11 kW 5 lower spindle 7.5 kW feed smoothly adjustable 6-36 m / min 5.5 kW feed motor power six top steel pulling rollers two upper rubber pulling rollers three pullers in the table top pneumatic feed pressure pneumatic shoe clamp spindles with brakes pre-table length 1970 mm electric height adjustment central lubrication (split) diameter of nozzles 140 mm dimensions of the machine (length / width / height) 410/200/180 cm weight ~ 3000 kg

Year of construction: 1999, condition: used, Seocnd hand Entex Extruder PL- WE 100 complete with electrical cabinet. Wa in operation for Powder Coatings. Prodjbqt Arepfx Ah Uef For sell is also a Entex Extruder PL WE 70 ( Laboratory ). Photos on request.

Condition: excellent (used), Kaeser Omega 83 P blower stage, fully refurbished, 12-month warranty, HB 1300 Podjncd Apopfx Ah Usrf

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Hopper inlet 2.26 m x 1.65 m Psdpswu Nwhjfx Ah Uerf

Year of construction: 2022, condition: new, Load capacity: 10.000kg Podsfxgp Uopfx Ah Uerf Speed: 0.03- 1.6 rpm faceplate diameter: 1.500mm, expandable to 2.500mm welding current transmission: 800A

Year of construction: 2022, condition: new, Pallet Board Stacker New upgraded M4 version. Included: Prodpfx Ajhhnbljh Usf - Unscrambler - Stacker with integrated lift - 2 spacer dispensers with support frame - Outfeed conveyor (one pack on the lift on on the outfeed) - pack lift for easy forklift operation

Condition: good (used), functionality: fully functional, motor manufacturer: VEM, power: 110 kW (149.56 HP), volume flow: 679 m³/h, Used ammonia compressor Sabroe TSMC - 116 S. Water cooled, well maintained, working condition, replaced because of new Sabroe compressor installation. Cooling capacity ~100kW (-20C). Controlled by Carell controller which can be included if requested. Motor 110kW. Some original parts also will be included. The compressor has been used in the production of fat/margarine. It normally operated at a suction pressure of 0.1–0.2 BAR, which resulted in an evaporating temperature (T₀) of -25°C and a condensing temperature (Tₖ) of +35°C, with a compressor capacity of approximately 100 kW. Prodpfeuq Hnyex Ah Ujf The compressor can also operate at a lower suction pressure to achieve lower temperatures, for example, between -30°C and -35°C.