3-stage plug-in bevel helical gear unit

Flender KZA 360

Condition: used, Gearbox, bevel gear, worm gear Bwjdpfxjt Snwxo Aihop -Gearbox: Ratio: i = 1:30 -Shafts: Ø 19 x 50 mm / Ø 28 x 60 mm -Dimensions: 150/145/H175 mm -Weight: 5.1 kg

Condition: excellent (used), Year of construction: 2002, Control: 3-axis active path control, Heidenhain TNC 123 Spindle speed: 40 - 2000 rpm, geometrically stepped direct drive with 16 gear stages for maximum torque / milling performance Feed rate: 5 to 500 mm/min, infinitely variable Rapid traverse: 1.2 m/min Quill: Extendable vertical quill, 60 mm, SK40 M16 draw thread Bwodpfeyg I Nfjx Aihjp Axes X/Y/Z: 300/160/340 mm Swivel table: 600 x 210 mm, max. load 200 kg

Condition: good (used), Open-end wrenches, ring wrenches as remaining stock -Open-end/ring wrenches: various sizes, with transport case -Weight of tool: approx. 400 kg Manufacturer: various brand manufacturers, see photos Bjdpfox Swarjx Aihewp -Submission/Price: complete -Transport box: 1200/810/H350 mm Total weight: 466 kg

Condition: reconditioned (used), Year of construction: 1987, Universal Tool Milling Machine Manufacturer: DECKEL Model: FP 2 Aktiv Year of manufacture: 1987 – overhauled, newly painted with new machine electrics RAL7035 light grey / RAL7012 basalt grey RAL5008 grey blue Machine no.: 2202-11579 Milling head type: 2271 Milling head no.: 300-3606 with warranty Geometric acceptance with inspection report Accessories: - 3-axis active digital readout HEIDENHAIN TNC 113 - Fixed table 660 x 380 mm (T-slot: 12 mm) - Vertical milling head SK 40 with drawbar thread S 20 x 2 Bodpfxox A Edde Aihewp - Central lubrication, hand-operated - Coolant system - Operating manual - used, as seen -

Condition: good (used), Year of construction: 1954, Ref. -No.: 10576 Manufacturer: VDF WOHLENBERG Type: VDF Year of construction: 1954 Type of control: Konventionell Control: n/a Storage location: Halberstadt Country of origin: Germany Machine-No.: 27XXX Turning Length: 4000 mm Bedpsxmd U Aofx Aihowp Spindle Diameter: Ø 80 mm Faceplate Speeds I: 355 RPM Turning diameter over cross slide: Ø 1000 mm Max. Turning diameter: Ø 1250 mm

Condition: good (used), Year of construction: 2016, operating hours: 6,580 h, mileage: 61,850 km, Equipment: air conditioning, Very well-maintained "Schmidt" Swingo 200+ sweeper from first owner! (V223) We are pleased to offer you this excellently equipped sweeper from the world-renowned brand "Schmidt," model Swingo 200+, previously owned by the City of Kropp. The sweeper was purchased in 08 / 2016 and is in thoroughly well-maintained condition – it is virtually rust-free and both visually and technically in good shape. Features include a three-brush sweeping system, all-wheel steering, air conditioning, cameras for reverse operation and suction mouth, as well as a nozzle irrigation system. The tires have been renewed. A service including an oil change and new coolant for the air conditioning was completed in 09/2024. The entire system is in good visual and technical condition, with no significant damage – everything functions as intended. Normal signs of use such as scratches, paint chips, and abrasions are naturally present but do not restrict usability in any way – see pictures. The vehicle has a total mileage of approximately 35,250 km and 4,630 operating hours. The sweeping distance is 6,100 km or 3,780 sweeping hours. The engine has a total of about 6,580 engine hours. Shipping is carried out within three working days after receipt of payment, insured by freight forwarder. Of course, you may also collect the machine during our regular business hours. The total weight of the system, including accessories, is 3,500 kg. Bodjtz Dhxepfx Aihjwp The sale is intended exclusively for commercial customers. You will, of course, receive an invoice, although VAT cannot be separately stated, as this is a public sector sale. Private buyers may purchase the machine “on behalf of the customer”; a direct commercial sale to private individuals is expressly not carried out! The goods are sold under exclusion of any warranty or liability for material defects. This exclusion does not apply to claims for damages from grossly negligent or intentional breach of duty by the seller, nor for injury to life, body, or health. For any questions about pricing or technical details, please feel free to contact us at the address provided.

Condition: reconditioned (used), Year of construction: 1956, Lead and Feed Screw Lathe WEIPERT Bwedpew Ew D Dsfx Aihsp Year of manufacture: 1956 Spindle bore: 90 mm Centre distance: 3000 mm Swing over bed: 800 mm Swing over cross slide: 610 mm Swing in gap: 1120 mm Speed range: 7.5 – 475 rpm Comes with the following accessories: Multifix toolholder with 11 inserts Coolant system 3-jaw chuck 315 mm 3-jaw chuck 400 mm 3-jaw chuck 500 mm Faceplate 400 mm Faceplate 800 mm Faceplate 1000 mm Travelling steady Various turning tools (30 insert tools) 2 revolving centres 1 drill chuck Operating manual

Condition: used, Technical details: z-travel: 400 mm range of revolution per miute: max. 3.000 / steples U/min feed continuous: keine Angaben quill stroke vertical: 100 mm spindle taper: MK2 table surface area: 445 x 315 mm distance table - lower edge spindle: max. 520 mm Bedev A S Efepfx Aihjwp table travel: längs: 250 mm table travel: quer: 330 mm table height over floor: 920 mm total power requirement: 1,6 kW weight of the machine ca.: 1500 kg machine dimensions LxWxH: 1,3 x 1,1 x 2,0 m Application: Milling and drilling slotted holes There is a precision dial gauge for depth display on the drill spindle head. 5x T-slots to DIN 650: a=10; h=18; b=18; c=8mm Features: Two-way digital ACU-RIDE display *

Condition: used, mileage: 155,600 km, power: 200 kW (271.92 HP), first registration: 03/2015, overall weight: 13,800 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, emission class: euro6, loading space width: 2,100 mm, loading space length: 2,400 mm, total width: 2,370 mm, total height: 3,350 mm, Equipment: ABS, air conditioning, all wheel drive, had accident, parking heater, * Unimog UGE U 427, Kommunal, EURO 6, Hydrostat, Variopilot, Vario Power, * NKS-Z-UGE 43 * OM 936 LA 6-4 Zylinder * Vario Pilot Wechsellenkung * Unfallfahrzeug Bwodpfx Aijy A Adwohop * Euro 6 * Telligent Automatik Getriebe * Klima * Stahlfederung * ABS * Vorrüstung für Rundumlicht * Sitzheizung * Standheizung * Tempomat * el FH, el Spiegel, Spiegelheizung * Frontscheibenheizung * Anbauplatte vorne * 9 x hydr. Anschlüsse vorne * Zusatzbeleuchtung * Lampenbügel 4 x Zusatzlampen * hydr. Anschlüsse für Salzstreuer * Auspuff hochgeogen * AHK + DL- Anschlüsse * 11x hydr. Anschlüsse hinten * Mähtür mit Drehsitz * Lampenbügel mit Warnleuchten hinten * REifen 445/65R2235 ca. 80% * deutsches Fahrzeug * 1. Hand * Behördenfahrzeug * Netto-Verkauf innerhalb der EU wird nur noch mit MWST Kaution und dem Nachweis der Zulassung im Bestimmungsland (Gelangensbestätigung) durchgeführt, * Verkauf nur an Gewerbe, Transport zum Hafen möglich, * Dieses Angebot ist unverbindlich und freibleibend. * Irrtum und Zwischenverkauf vorbehalten. Keine Gewähr auf Eingabefehler. * Besichtigungen nur nach Vereinbarung, * WhatsApp

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis (cross): 850 mm Y-axis (vertical): 750 mm Z-axis (longitudinal): 1050 mm W-axis (quill): 600 mm B-axis (table): 360° Bedoxtu D Uspfx Aihewp Table load capacity: approx. 3500 kg Infinitely variable spindle speed range: 20 – 1500 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Dimensions (L x W x H): 3950 x 2200 x 2200 mm Weight: 5800 kg Accessories / Special features: • 3-axis digital readout, manufacturer FAGOR • Full machine control via swiveling operator panel • Machine bed cast in one piece • Infinitely variable spindle speed, adjustable via servo drive with potentiometer • Feed + rapid traverse • Coolant pump • Emergency stop switch Includes additional spindle mount DIN 55027 Gr. 8 on the drilling spindle, e.g. for mounting a 3-jaw chuck or a faceplate At the end of the machine bed, a table guide with drive is mounted to accommodate a tailstock. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund – Wambel / Germany