Waterjet cutting machine, double head,
Working table: 3.000x3.600x200mm. Numerical control: Siemens
Ingersoll-Rand pressure pump
Cutting options with or without abrasive
Possibility of manual inclined cutting
By8iyzls
Total exterior dimensions approx. 9.,600 x 7.500mm
x-travel 2000 mm
y-travel 4000 mm
z-travel 150 mm
Control Siemens Sinumerik 840D
table-size 3000 x 4000 mm
swivelling +/- 57 Grad
traversing speed
x-axis 20000 mm/min
y-axis 20000 mm/min
z-axis 12000 mm/min
positioning accuracy +/-0,1 mm/m
E9ksxti3a
repeating accuracy +/-0,025 mm
total power requirement 15 kW
weight of the machine ca. 11 t
equipped with:
- CNC Siemens control Sinumerik 840D,Handwheel and Siemens SIMATIC
S7-300 and SIMODRIVE 611, 1GB HHD Drive
- Machine works with 2D cuttin...
Bridge Type 6 axis CNC machine
PIPE and PROFILE can be cut in higher precision compared to laser technology.
With Stainless Steel Divisor, designed by our engineers and integrated into system,brings optimum cutting solutions for profiles and pipes. 7 each servomotors working simultaneously realize smooth and rapid axial movements. Post Processes and all the software are written by Mavijet.
X Axis Motor 1 Pc. 3.2 NM servo motor set.
Y Axis Motor 2 Pcs 3.2 NM servo motor set.
Dlcdybqse
Z Ax...
x-travel 6000 mm
y-travel 3000 mm
Coz9u7wym
z-travel 230 mm
Capacity 3600 bar
workpiece width - max. 200 mm
table load 28 t
feed 84 m/min
Table 6000x300 mm
control By Vision
total power requirement kW
weight of the machine ca. 16,7 t
dimensions of the machine ca. m
2 heads
NO: 359 W
treatment plant
We offer a fully equipped and ready to use waterjet cutting system, including:
• pump
• chillers
• compressed air system
• abrasive management system
• water preparation system which is among the most sophisticated versions on the market (the number of filters is much higher than in the standard configurations)
All components are very well preserved and have been barely used (hours worked: Pump:1848hours; Motor: 1923 hours). The whole system is included in the price and we are pleased to assis...
X-Y working area: 3210x2000mm. Maximum X-Y load plate size: 3300x2250mm. Z-axis stroke: 200mm with 5-axis head. Maximum speed of X-Y axles: 45 m/min. Maximum payload support surface of the part: 1,000 Kg/m2. TECHNICAL DATA OF THE UHP INTENSIFIER. Intensifier power 37 kW. Max. pressure 420Mpa. Water flow max.: 3.8 l/min. DIMENSIONS: L:6280mm. W:4940mm. H max. (standard) 5000mm. Only 928 working hours.
Ygnlg
Bridge Type 6 axis CNC machine
PIPE and PROFILE can be cut in higher precision compared to laser technology.
With Stainless Steel Divisor, designed by our engineers and integrated into system,brings optimum cutting solutions for profiles and pipes. 7 each servomotors working simultaneously realize smooth and rapid axial movements. Post Processes and all the software are written by Mavijet.
Yeht8
X Axis Motor 1 Pc. 3.2 NM servo motor set.
Y Axis Motor 2 Pcs 3.2 NM servo motor set.
Z Axis M...
Abrasive water jet cutting system:
AMT WJ 5030
Built 2019
Working range x: 510mm
Working range y. 310mm
Dwkkha
Table size: approx. 650mm x 400mm
Table load: max 50kg
Soil load approx. 450kg
Working range z : max : 100mm manually adjustable/ for abrasive cutting, the setting range in z: approx. 60mm
Positioning accuracy:/- 0.05
Repeatability: less than 0.04
Cutting accuracy at the top edge of the workpiece: +/- 0.1mm
Installation dimensions machine with integrated high-pressure pump: approx. 100...
Waterjet cutting machine with 5-axis head.
Total cut-off hours: 2.147 hours. Hours of operation: 7.484 hours. Dimensions axles: X-3.000mm Y-4.000mm Z-500mm.
Pump "KMT", press max.: 4.100bar.
Maximum part thickness: 200 mm.
Maximum permitted load of pieces: 790 kg / m2.
Number of cutting heads: 1 of 5 axes.
Maximum cutting speed: 20 m / min.
Machine tolerance according to VDL / DGQ 3441: ± 0.05 mm / m.
Dnlbiyd80
Repeat accuracy: ± 0.025mm / m.
Opal WaterJet Combo is the only machine in the world that combines the advantages of ultra-fast plasma cutting technology and the accuracy of waterjet cutting. The synergy of the possibilities offered by both technologies allows you to take full advantage of all the benefits.
Thanks to its universal application and extensive equipment options, the Opal WaterJet Combo has proven itself in both large factories and small operations.
Main features
Bmzf8n0rdf
- Innovative, patented use of water jet a...
MJT BYFAM -W5-45D -3020 WATERJET CUTTING MACHINE
HIGH-PRESSURE WATER CUTTING SYSTEM
DELIVERY FROM THE MANUFACTURER IN A SHORT TIME
Cutting size (mm.) CNC - 5 axis bridge 45D Type 3000x2000x250
CNC control unit ESA control unit
Ethernet and network interfaces, USB port
Additional handwheel (X, Y, Z)
Helical gear system Hardened gears and pinions
Linear bearings Linear guides and rails
Step accuracy 0.01 mm
Fast rotation speed 30.000 mm / min
Lubrication Automatic centralized lubrication system...
Hezinger WaterLine HWOP cutting system
Workspace 4000 x 2000 mm
High pressure pump Manikandann.m 40.37 37.0 kW
Collision protection ALFFI heights Abt page
ECK872 4-axis CNC control system
Software IGEMS 2D nest level 1
Machine type Hezinger-WaterJet HWOP
Double-sided drive
Cutting width 4,000 mm
Basic working length 2000 mm
Cutting speed 50 - 10,000 mm / min
With the water jet Max cutting thickness 0.5 200 mm, stroke 250 mm
Speed up to 25 m / min
Cutting pool 4000 x 2000 mm
• made of galv...
Manufacturer: Expert Systemtechnik GmbH
Make: cutEXPERT
Type: Variojet
Year of manufacture: 2009
Features: single table with the dimensions: length = 6500mm; Width = 3300 mm; Height = 1850mmGewicht: 1500kg
Power consumption: 7,0 kW
Cutting head number 2 manufacturer: AllfiType: V high SpeedHochdruckpumpe
: Manufacturer: UhdeTyp: HP19/37-SBaujahr: 2009
Capacity 3, 8 l / min
Eccbpvedq
Design pressure: 4000 bar
Motor power: 37kW
Weight: 1450kg
Single table, work room (cutting edge) dimensions: Len...
The Opal Waterjet cutting system is the answer to particularly high demands for precision without thermal influence on demanding contours.
Thanks to a wide range of equipment options and a powerful high-pressure pump, the cutting system is suitable for practically all available materials, such as steel, stone, wood, etc. up to a material thickness of 250 mm.
The optionally available ProX 3D cutting head provides additional possibilities in 3D processing. Furthermore, we offer extensive additiona...
CE-certified water jet cutting machine JET-2515
Pure water system with a 15kW high-pressure pump
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasive version is equipped with an abra...
Universal Portal waterjet cutting system Hezinger WaterLine model HW 3020
Operating range X-axis 3,080 mm
Movement range Y-axis 2,080 mm
Travers area Z axis 250 mm
Ray catch basin with supporting area approx. 3,200 x 2,200 mm
Load the pad up to 800 kg / m ²
07ecf2tw0
Portal system with fully protected axle Guide
Leadership machine and framework of thermal and mechanical
separated from each other.
Cutting water basin for the destruction of the residual energy
included even bearing grid
1...
IFB (integrated flying bridge) work area: 1200 mm x 2000 mm (real 1210 x 1990 mm) table is 1400 mm x 2040 mm
Nagz7
Hours of operation: approximately 17, 000 h
Pump: Model: ESC Allan Lickiss, performance 4150 bar
The machine is cutting replaceable on Abrassiv
(other cutting head), all parts including sand tanks are almost
unused available.
The machine was used only for pure water cutting.
well preserved OMAX Maxiem 2040 waterjet cutting system
incl. Müller abrasive feed
incl. EKOWA dosing system for waterjet cutting system
Machine is in use and can be visited by appointment.
Year of construction 2015 (commissioning 04/2016)
Pump hours 4109 h
Technical data
machine size: approx. 5.486 x 3.696 mm
machine height: approx. 2.692 mm
Machine weight: approx. 2.495 kg (empty tank)
Table size approx. 4.902 x 2.134 mm (max. workpiece 1.465kg/m²)
X-Y-Z Travel*: approx. 4,000 x 2,000 x 305 mm...
Water jet cutting system make Ridder
Travel distance 3m x 3m
2 cutting heads
One cutting head 3D
One cutting head 2 D
Gwnevg
2 high pressure pumps make Ingersoll / KMT
Desludging plant
You can use the plant for steel, aluminum, plastics,
Natural stone, tiles and much more, economical cutting.
CE-certified water jet cutter flowJET-3015
Abrasive cutting unit with 30kW high pressure pump
with abrasive dosing and storage tank
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasi...
Water jet cutting machine Hezinger WaterLine model HW1006
1 54.200,00 54.200,00
3ghomq7mq
Portal system for the Abrassiv water jet cutting with
integrated water collecting tray
2 axle system (X Y) and Z axle manuel adjustable (adjustment wheel)
Traverse paths x x Y 1000 x 600 mm
Machine accuracy 0.08 mm
Dimensions L x W x H 2,150 x 1,800 x 1.915 mm
Machine weight approx. 1.500 kg
Basic machine for external and internal pump
Facilities in the price included:
-Base with housing (excess man large)
...
Water jet system flow model
IFB2 3618 TC 1 P
Year of construction: 2005
State
good (used) hours of operation
25000 h
IFB2 3618 TC 1 p UP 50iS cooling working range 3600 mm x 1800 mm
Nbrvz
High pressure pump 50iS 60ESL 4150 bar with Abrasivbehaelter without any program software
Immediately available.
Installation and Setup on request
WATERJET MACHINE 2040 complete of
- Cutting table 2000 x 4000 mm
- Structure
- Water tank
- Material supporting frame
- Motions
- Numerical control
- 1x MASTER Carriage for VERTICAL and automatic 3D bevel cutting equipped with Water jet application, Automatic Bevel Capabilities up to +-45degrees, Dynamic compensation of the head to maximize the straight vertical cutting achievement, Dinamic compensation data base;
- Cutting head
Bjuh0xksaw
- Set of high pressure pipes and hoses
- Abrasive tank (...
CE-certified water jet cutter flowJET-2015
Abrasive cutting unit with 30kW high-pressure pump
with abrasive dosing and storage tank
Nwpp2
***Manufactured to customer order***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the a...
Plant for cleaning of the cutting water and supply to the high pressure pump in the Kraislauf
The water cycle promotes approx. 9000 litres per hour
Bam7elkunn
Max 2 pumps can be connected
CE-certified water jet cutter flowJET-2015
Abrasive cutting unit with 15kW high-pressure pump
with abrasive dosing and storage tank for 100kg abrasive
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
Bhxkndd92q
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abra...
For sale is a control card of the company Bosch Rexroth.
The card was not installed and is therefore unused.
Costs for shipping outside Germany will be calculated individually and paid by the buyer
Iwf8spf
CE-certified water jet cutter flowJET-2015
Pure water system with a 30kW high-pressure pump
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasive version is equipped with an abrasive ...
CE-certified water jet cutter flowJET-2015
Pure water system with a 15kW high-pressure pump
***Manufactured to customer order ***Delivery time approx. 13 - 16 weeks***
proven RaptorX-SL technology equipped with quality components from the manufacturers HAMMELMANN® and ALLFI®.
different high-pressure pumps with 3800 bar selectable with an output of 15 kW or 30 kW
available in different versions as pure water system or as abrasive cutting system
the abrasive version is equipped with an abrasive ...
The Machineseeker Trust Seal gives buyers the opportunity to see, at a glance, whether they are dealing with a trustworthy seller.
What do we verify?
Check of trade licence or commercial register extract
Check the address of the dealer
Validation of Bank connection
Verification of accessibility to main phone number
Credit report may not contain negative criteria
Buyer complaints can lead to withdrawal of the seal
What does this mean for the seller?
After successful verification, we will include the seal in your advertisements on Machineseeker. In this way, you signal to every potential buyer the seriousness of your company, checked by an independent body. This creates buyer confidence and increases the probability of successfully selling machines. In addition, you have the option of including the Machineseeker Trust Seal on your homepage and in business letters.