GALEN Mechanical Pulverizer from Stock

GALEN Mechanical Pulverizer from Stock

Condition: like new (used), functionality: fully functional, Year of construction: 2025, operating hours: 55 h, Machine with special rotor available immediately Advantages: + special rotor with reduced blade overhang, suitable for hard and soft materials + 22 kW motor + effective square blades *for pallets: up to a maximum of 10 pallets per hour *dependent on screen size and material. With smaller wood residues, significantly more. Motor: 22 kW; 400 V - 50 Hz - 3 phase, Screen: 15/20 mm or as agreed (10 to 40 mm possible) hydraulically operated slide Screen opening currently (15/20 mm) *can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star/delta start - fast hydraulics - auto. OFF when the rotor is idle Credpfx Asx Af Rdol Noc - speed 70-90 rpm for high throughput - cycle control to avoid idle times - performance-enhancing step control of the hydraulic slide - Pertinax guides for hydraulic slide - vibration-damping machine feet - CE compliant The following options are available at an extra cost: - Raise shredder by 30 cm (preparation for conveyor belt) + €2,480 net - Inclined conveyor belt (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - extended feed hopper 1500x1500 mm + €3,480 net Requirements for the raw material: - The moisture content (as received) must be below 25% - The feed must be free of metals and mineral contaminants. Damage to the tools and/or increased wear may result.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, Used Andritz Paladin 600B Codpfxsx N T Uaj Al Njrc Incl. combined stainless steel feed auger and mixer, 2x 55kW motors, other motor options negotiable Interior inspected 2 years ago Includes frame for roller and die change

Year of construction: 2019, operating hours: 1 h, condition: as good as new (ex-display), machine/vehicle number: MISCO1082, Oil Mist Collecting and Regaining. MISCO is used for collecting and getting rid off the oil in the CNC machines cabin. It is a water vapor, aerosol, smoke, oil mist filtering / separating device. Also allows condensing and recycling the condensed liqud back to the sump The particulate-smoke-gas-water in the air sucked in is filtered through the vapor separation units. The saturated oil-water etc. contained in the air is also separated and recovered, and the air is cleaned by 98% of the dry air. Removal of parts washing machines vapor-mist, Welding fumes, Oily air off CNC machines In the industry and even In the industrial kitchens a lot of oil mist, various gases, fumes and dusts are mixed into the air and create a risk of fire. In addition, they are inhaled by workers and cause damage especially to the lungs, respiratory tracts and other vital organs. For this reason, harmful substances such as gas, dust, smoke and similar substances must be cleaned by absorbing harmful substances in terms of safety and health. Codpfod Nwk Usx Al Norc Application Areas: CNC Machines Welding fumes, Allows removal of oil vapor and recovery of existing fluid in CNC machines Automotive - Metal Processing – Food Industry - Industrial Kitchens - Steel - Casting - Chemical Industries etc. Working Principle; 1-Entry of dirty smoke –vapor- mist 2- Condensation with laminar flow over the walls 3- Disintegration of the particles passing through the filter 4-Recycling of condensing liquid 5-Dry and clean air evacuation For detailed information please contact us. mistcollector, cnc cutting oil, fume removal, cutting oil fume collector

Condition: used, Year of construction: 2006, functionality: fully functional, Complete briquetting line 2 x RUF 330. Boiler room, drum dryer, conveyors. Csdpfx Asxazhtjl Njrc

Condition: ready for operation (used), Technical specifications of Dixi 60 AUTOMAT baler Filling opening (W x H): 1550 x 1000 mm Drive power: 31.5 kW Pressing force: 60 t Bale weight (depending on material): 350–600 kg Bale dimensions (W x H x D, adjustable): 1100 x 800 x 300–1600 mm Pressing/cycle time: 13/24 s Machine weight: 7000 kg Crjdov Amw Nspfx Al Noc

Condition: reconditioned (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: HBC 140 2x75kW 2001 (210-008-01), pressing force: 155 t, bale weight: 1,500 kg, pressure: 250 bar, power: 150 kW (203.94 HP), year of last overhaul: 2024, Equipment: documentation/manual, Sold by Bollegraaf Recycling Solutions, the original manufacturer of this Bollegraaf baler and conveyor: Bollegraaf HBC140s Baler (2x75kW). Baler: Weight: 47.100 kg Construction year: 2008 Hardox bottom floor plate only Variable channel pressure control Plastic valve Hydraulic pump driven by frequency inverter Anti-rat cabling Oil in-depth filtration Modem Hours 40.000 Cjdpfx Alstvau Ae Nerc This baler can also be sold fully refurbished according to the 'Bollegraaf OEM Certified Refurbishment standards'. This includes 2 year guarrantee. Contact us for more information or a quotation. General principles of refurbishment Cleaning & disassembly Before the actual refurbishment takes place the baler is completely cleaned and disassembled in our refurbishment workshop. Tolerances After the disassembly the tolerances of all steel components are measured and re-welded where necessary, this at least applies to the following components; • Ram, • Frame, • Channel, • Pre-press-flap After disassembly and inspection the ram is welded-up again and fitted with new ram wheels. The protective grids and the pre-press flap are made dent-free and repaired where necessary. Repainted After measuring the tolerances and any repair- and welding work, all components are being blasted and coated again. Hydraulics: The hydraulic tank is cleaned. The hydraulic lines & hoses are replaced. The hydraulic components are repackaged. The hydraulic oil is replaced. Cabling: All cabling is checked and replaced if necessary. All junction boxes are replaced and placed back in easily accessible positions. Wear parts: All wearing parts are replaced. The pins and shafts of the cylinders and the channel are replaced with new ones. All wearing parts of (both) needle installations and knotters are replaced for new. Cylinders: The cylinders are repackaged and, if necessary, provided with a new chrome layer or a new cylinder rod. MCC Cabinet The switch box is checked and cleaned. If necessary, electronic components are replaced with new ones. The PLC and HMI (human interface) are replaced with the latest Schneider M340 version including the latest software.

Condition: used, No. 10019 Various conveyor belts Used Consisting of 8 positions Crjdjwhp H Nspfx Al Nec Pos. 1: Blue conveyor belt, approx. 8000 x 800 mm LW, was used for waste Pos. 2: Orange conveyor belt, approx. 12000 x 1200 mm LW, as good as new Pos. 3: Blue conveyor belt, approx. 13000 x 1000 mm LW, as good as new Pos. 4: Two blue mobile conveyor belts, each approx. 10000 x 800 mm LW Pos. 5: Two turquoise conveyor belts, 1st belt approx. 10000 x 1600 mm LW, 2nd belt approx. 4500 x 1400 mm LW, very solid - with sheet metal floor, new motor and gearbox required Pos. 6: Blue Westeria conveyor belt, approx. 14000 x 1200 mm LW Pos. 8: Green mobile Z conveyor belt, approx. 7000 x 500 mm LW, new belt, as good as new Pos. 9: Green garbage truck loading conveyor belt, approx. 5000 x 1000 mm LW, at the height of a garbage truck to load it with garbage Sale on behalf of customer, ex location near 85456 Wartenberg, without dismantling, without transport and assembly Errors in description and price excepted Dismantling, transport and loading by us optionally possible To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical details, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “purchased as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices excl. VAT, payment before collection or dispatch Terms of delivery: ex location

Condition: new, functionality: fully functional, Year of construction: 2025, New mobile concrete batching plant from BLENDPLANTS. Fully automatic, computer-controlled concrete mixing plant for continuous mixing of: - Concrete - Polymer concrete - Flowable fill - Soil stabilization - Cold asphalt On-site concrete production instead of ready-mix delivery! Produce only as much concrete on site as you need! No residual quantities, no wasted raw materials! Various machine sizes available: - Feed capacity from 3.5 m³ to 15 m³ - Output rates up to 70 m³/h for this size (E-Series), up to 120 m³/h for the A-Series - Batch production starting from 100 kg - Mobile or stationary versions - Diesel or electro-hydraulic drives BLEND Automation: - Recipe management Csdjtzk Tzjpfx Al Nerc - Delivery note printing - Data export via USB - Remote access We are the exclusive BLENDPLANTS.com representative in Germany. Contact us – we will be glad to provide you with a customized offer. Occasionally, we also have used machines available! Please ask!

Condition: used, Year of construction: 2024, color: green, empty load weight: 4 kg, first registration: 06/2024, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP HOOK-UP CONTAINER FOR BULKY WARE IN HARDOX, REAR OPENING WITH TWO FOLDING DOORS + MEC CRANE WITH PANTOGRAPH FEET AND 6-BLADE GRAPPLE WITH MECHANICAL ROTOR REF: 24-U-103 TYPE: bulky goods with crane NEW: no LID: no OPENING: rear with two folding doors Cedsv Hiciepfx Al Norc OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 5.90 m CASE LENGTH: 4.70 m + 1.00 m crane space + 0.20 m beams CASE EXTERNAL WIDTH: 2.50 m CASE INTERNAL / EXTERNAL HEIGHT: 2.30 m / 2.50 mt MC: 25 WEIGHT: 6020 kg BOTTOM: 5 mm WALL: 4 mm COLOUR: green CRANE DATA BRAND: MEC F1211.S2 SERIAL NUMBER: 50579088 EXTRACTIONS: 2The prices shown do not include VAT. Please contact the sales representative for an updated comparison of prices and conditions. For more information: Loris: 3484773001 URL: #glispecialistidelloscarrabile SCARRABILI AURORA operates in the sector of the sale and purchase of industrial and commercial vehicles, mainly specialised in the waste sector. Specialised in trucks, trailers and hook-lift equipment. With a fleet of over 50 trucks and over 150 skip loaders, containers with and without hook-lift cranes ready for delivery. S.E.&O Given the quantity of ads and details entered, Aurora invites you to verify the accuracy of the data entered with the sales staff.

Condition: like new (used), Year of construction: 2016, overall weight: 8,200 kg, fuel type: electric, color: white, Type HX426 Blade diameter (mm) 650 Number of hammers (pcs) 30 Inlet size (mm) 1250 x 250 Screen mesh size (millimeter) 80 Length of chips (mm) 50 -80 Capacity (t / h) 8- 10 Main power (kW) 132 Csdpfxoqmi Ire Al Nsrc Feeder motor (kw) 7.5 +5.5 Discharge motor (kw) 5.5 +5.5 Oil pump motor (kw) 1.5 Length of conveyor (mm) 4000 Conveyor length (mm) 10000 Weight (t) 8.2 Note: capacity depends on the physical characteristics of the raw material, feeding method, feeding speed and production volume.