Screw compressor

Gardner Denver KBV 18

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, total height: 2,070 mm, total length: 2,000 mm, total width: 1,200 mm, overall weight: 600 kg, Comafer K100, output 100 kg/h. 6mm pellets, chips with 8-12% moisture content. Material is ground by a mill to the appropriate fraction (5.5 kW), then fed by a screw conveyor into a ring die pellet mill (7.5 kW) where it is compacted. The process is fully automatic, controlled from an electrical control cabinet. Very high pellet quality. Nodpfow Hnglex Aacoku

Condition: used, SPE Renergi Low Temperature Dryer. The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. Power supply Data: • Voltage 400 V AC, three phase • Recommended fuses in supply line: maximum 3x630 A • Typical power consumption: 200kW The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. Airflow: max 200 liter/min Air pressure: min 4,5 bar, recommended 6,0-8,0 bar Water supply: hot water supply, with a flow of 32 dm3/s. Water pressure: min 1.5 bar, max 6.0 bar Operating temperature range: • Incoming air temperature: -20°C to 50°C • Relative humidity: 0% to 60% Raw material/media: • Relative humidity: 45% to 55% by wieght • Requested relative humidity: 8% to 15% in the dried material Capacity: • The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load Nedpfjwp Rqfjx Aacoku • The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: • The Machinery Directive 2006/42/EC • LVD 2006/95/EC • EMC 2004/108/EC The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. The dryer is already dismantled All electrical schematics, manual, operating instructions available Upon request, we can provide a contact person with this type of working dryer for consultation Price:20,000.00 EUR (VAT is not included)

Condition: used, Year of construction: 2006, operating hours: 14,000 h, Equipment: all wheel drive, Liebherr A 314 Litronic year 2006 approx. 14,000 operating hours 16 tons German machine dozer blade mono boom air conditioning all services carried out by Liebherr Tel: We are happy to assist with financing or leasing EU sales: net price upon presentation of company documents and VAT/tax number VAT deposit €2,000 we speek english govorimo srpsko-hrvatski Our services for you: - Export license plates - Export documents and EUR1 - Worldwide transport - Accommodation options - Transfer from Munich Airport or Passau train station Nodpfxow Tg A Rj Aaceku Tel:

Condition: new, axle configuration: 2 axles, color: red, Year of construction: 2022, Beco Brevis 100 tipper • 10-ton tipper • Load capacity: 4.2 m³ water • Cargo box internal dimensions: 4100x2050x500 mm • Hydraulic tailgate or optional with doors • Air-braked tandem axle • Rear bumper • Pendulum tandem, track width 1650 mm • Axle body: 90x90 mm • Tyres: 500/50 17, brand BKT • LED lighting • RDW certified • Various options available Condition: New Year of manufacture: 2022 Nkjdpfxox I Dhzs Aaceu

Condition: used, Year of construction: 2011, operating hours: 1,300 h, power: 177 kW (240.65 HP), Equipment: air conditioning, cabin, crop cutter, onboard computer, rape cutter, Hectare counter | Oilseed rape side knife left: hydraulic | Oilseed rape side knife left: hydrostatic | Oilseed rape side knife right: hydraulic | Oilseed rape side knife right: hydrostatic | Fendt 5250 L Year of manufacture: 2011 Approx. 1,300 engine hours Approx. 2,400 hectares Display was recently replaced, therefore only a few hectares are shown on the meter 260 hp Iveco engine Straw chopper Nedpfx Aajx R N Ryjcsku Loss monitoring Biso Crop Ranger 5.50 m header Hydraulic side knife for rape | Internal no.: 10519550

Condition: good (used), Year of construction: 1999, functionality: fully functional, Tamroter Gardener Denver Screw Compressor Type ES 45-7.5 EANA Year 1999 S/N 09990138 Regular maintenance Operating hours: 17,482 h Start-up hours: 9,242 h Air flow: 1,712 h Oil flow: 663 h Oil change: 663 h Nkodpfx Aajurc Npsceu Capacity 7.95 m3/min Motor 45 kW Voltage 400 V/50 Hz Weight 935 kg CE marked

Condition: excellent (used), Year of construction: 2017, operating hours: 36,000 h, functionality: fully functional, overall weight: 1,890 kg, total length: 2,200 mm, total width: 1,420 mm, total height: 2,050 mm, motor manufacturer: Garden Denver, power: 75 kW (101.97 HP), fuel type: electric, volume flow: 684 m³/h, operating pressure: 10 bar, type of cooling: water, Equipment: type plate available, Oil-free screw compressor PUREAIR Compair D75HRS 10A 75kw 10 bar 11.4m3/min with frequency converter CompAir D75HRS-10 oil-free, water-injected, Dryclon series frequency converter screw compressor With its 75 kW engine power, it reaches a capacity of 10,320 l/min. The 10 atmosphere operating pressure ensures stable and clean compression, making it ideal for use in areas where air cleanliness plays a key role. COMPAIR D75HRS screw compressor fully serviced, for sale in excellent condition oil-free design, direct drive, controlled by frequency converter. Regulated speed - air and water cooled 75 kW power, Nksdpjw Rcgtofx Aacju air flow: 11.4 m3/min /684 m3/h Built-in frequency converter: Manufacturer: Compair D75HRS 10A Year of manufacture: 2017.12 hours: 36000 Drive power: 75 kW Pressure 10 bar Flow rate: 11.4/min Delco XL controller Main rotor speed: 2980 Voltage: 400 V 50 Hz 3 phase current consumption: 128 A Machine weight: 1890 kg Dimensions: 225 long 142 wide 205 high. If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: excellent (used), Year of construction: 2016, GARDNER DENVER ksa45 Screw Compressor Technical Data: Capacity: 6.82 m3/min; Motor power: 45 kW; Max pressure: 10 bar; Operating hours: 2820 h Year: 2016; Njdpfx Aajw Nimqoceku Compressor fully functional; Net price: 16,500 PLN Gross price: 20,295 PLN

Condition: used, Year of construction: 2022, Sweeper from Saphir FKM 181 Nodpfx Aox Ia Tyjaceku The machine is unused and will still be assembled by us. The broom can be hydraulically rotated and swivelled.

Condition: excellent (used), Year of construction: 2019, volume flow: 0.97 m³/h, operating pressure: 10 bar, pressure: 10 bar, GARDNER DENVER CHAMPION FM 07 screw compressor Motor 7.5 kW Capacity 0.97 m3/min Pressure 10 bar Year of manufacture 2019 Nedsw D S Rcepfx Aacoku Compressor is fully operational.