Drying system

GEA Niro Atomizer Spray Dryer MSD

Condition: used, Year of construction: 2018, Overview  This vacuum evaporator was manufactured in 2018 by Italian manufacturer REDA. The machine is designed for gentle concentration of musts, juices, and other liquid products at low temperatures to preserve aromas and product quality. It is almost new and offered for sale as it was intended for a project that did not proceed. The system features an automated, CIP‑ready design. Technical data  - Capacity: 100 L/h evaporation capacity at +22/+24 °C - Application: Concentration of musts, juices, and liquid products - Operating modes: Recirculation mode or direct concentration mode - Max. concentration: 55–70 °Brix - Daily output: 2,400 L evaporated / 24,000 L enriched to 10% - Utilities: - Electrical supply: 25 kW, 380 V / 3Ph / 50 Hz + PE - Water: +12/+18 °C (low consumption) - Compressed air: 6–8 bar Iedpfxeykrdbo Acfjti - Connections: DN40 DIN, 50 mm hoses - Control system: PLC automation, IP65 control cabinet, digital temperature indicators Scope of Delivery  - Vacuum evaporator | REDA | CM100 | 2018 | Complete AISI stainless-steel construction - Evaporation chamber | Stainless steel, full inspection access - Heat exchanger | AISI 316L tubular exchanger - Vacuum pump | Liquid-ring system with cooling recirculation - Refrigeration group | Heating 75,000 kcal/h, cooling 60,000 frig/h, 2 × 12.5 HP Copeland compressors - Pumps | Stainless-steel centrifugal and mono volumetric discharge pump - Vapor condenser | Stainless-steel surface condenser - Instrumentation & tanks | Flowmeters, cold and hot water stainless-steel accumulation tanks

Condition: good (used), Year of construction: 1990, machine/vehicle number: 5211, Offer 24289 Technical data: - max. cutting width 3060 mm - max. cutting capacity at 45 Kp/mm² 4 mm - Cutting angle 1.50 ° - Cutting gap - adjustment via adjusting screws - Number of hold-down devices 15 pcs - Stroke rate 23 to 43 /min - Front angle stop - Motorized backgauge position-controlled 15 - 850 mm Iodpst Ucgaofx Acfsti - Cutting line lighting - E - foot switch - Drive 400 V / 7.5 kW - Space requirement approx. W 3900 x H 1600 x D 2400 mm - Weight approx. 4.5 t

Condition: new, Year of construction: 2024, Magnetic separator for chip transport lines Ijdpfecqvhwjx Acfsti Pipe magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Pipe diameter: 180 mm Location: In stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2017, CNC gantry plasma cutting machine (beveling unit) Manufacturer: Zinser Type: 2425-I/3600 Year of manufacture: 2017 CNC control: 5010 Travel length: 11 m Oxy-fuel cutting table with oscillating conveyor system, including dust extraction system Dimensions: 2,000 x 8,000 mm 1 plasma torch with Hypertherm XPR300 power source automatic gas console including automatically rotating plasma beveling unit Bevel System 2015/350 Downflow filter system 3DFP9-SP Power: 9 kW Isdpfx Acsw Rpvbefsti Laser diode 3726

Condition: new, functionality: fully functional, Year of construction: 2025, laser type: fiber laser, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Cutting format (mm): 12000*2500 X-axis travel (mm): 2530 Y-axis travel (mm): 12050 Z-axis travel (mm): 120 Maximum synthetic positioning speed (m/min): 140 Acceleration (G): 1.5 Main unit volume (mm): 15600*3650*1900 Itjdpfswwz Dxox Acfsi Floor area (mm): 16000*5500 Total machine weight (KG): 12500

Condition: used, Year of construction: 1992, Technical details: Itjdpfx Acju Nz I Tefsi max. temperature: 120 °C internal diameter: 980 mm internal length : 2580 mm external diameter: 1500 mm external diameter : 2740 mm wall strength: ca. 6,5 mm content: ca. 2000 l weight: 1425 kg Autoclave tank It is possible that this autoclave were built for the process of steam sterilization (according to operating parameters) The operating overpressure of +2 bar per room probably refers to the execution of the steam sterilization process, not to the pressure resistance of the container. - Permissible operating temperature 120 °C *

Condition: new, Setting total time Frequency speed control Automatic unloading Vacuum 0-95% Vacuum system filter Volume: 500 liters Machine dimensions in cm: Itsdpfeuu Rkaox Acfoi Length: 178 Width: 102 Height: 155 Electric power: 3 kW

Condition: used, Used DSI V-5 32/100 vertical plate freezer on Freon/NH3 with 32 stations. Inner dimensions 1 station: 810x100x580 mm (LxWxH). Total block dimensions with a volume of 239 liter: 4100x840x580 mm (LxWxH).It is possible to freeze 507,7 kg of fish fillet each hour with a thickness of 100 mm. Ijdpfsrlk H Rjx Acfeti

Year of construction: 1994, condition: good (used), Used M-Tec Ploughshare mixer Type MS-150 Batchmixer Minimal mixing volume 350 dm3 Maximum mixing volume 1500 dm3 Motor 37kW 115 rpm Itedpeir E E Esfx Acfoi Incl. Sampling unit specicon

Year of construction: 2007, condition: new, functionality: fully functional, UNUSED Complete Potato Processing and Frying Line (2007), Installed But Never Commissioned Capacity: approx. 1,000 kg/hour This is a rare opportunity to purchase a complete European industrial line in near-new condition at a fraction of the replacement cost (>€1.5M). Key Features: - UNUSED – 0 operating hours - Installed but never put into production - Complete line: input → frying → cooling → packaging - High-quality European manufacturers - Immediate availability Main Equipment: - Blancher – Komen-Kuin (UNUSED) - Vibrators – Kiremko / Atraco (UNUSED) - Frying Line – Florigo (UNUSED) - Conveyor Belt – Florigo (UNUSED) - Pre-Refrigeration – Ferguson (UNUSED) - Refrigerator & Control Panel – Ferguson (USED, included) Iedpfx Acsy Axfkofeti - Packaging Machine – Campagnolo (UNUSED) - Boiler Station – Maxxtec (UNUSED) - Oil Tank – Florigo (UNUSED) - General Control Panel (UNUSED) Condition: The majority of equipment is UNUSED (0 hours). Installed but never commissioned. Location: Greece Availability: Immediate Inspection: Available Dismantling & loading support: Provided Note: Priority will be given to buyers interested in the full line. Serious inquiries only.