Telescopic work platform

Genie Z62/40 4WD / 12-9989

Condition: ready for operation (used), Number of spindles 6 St. Working width 230 mm Working height 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5-24 m/min. WEINIG Unimat 23 E Planer and moulder ----- 6 spindles (with 2 rigth spindles, reinforced motors, 8,000 rpm, ATS control Machine will be cleaned and functionally checked before delivery Crjdpfxoxz Hh Us Abwei Working width 20 - 230 mm Working height 8 - 120 mm 1st spindle (bottom) 5.5 kW (motor replaced) ----- Diameter 40 mm Speed ??6,000 rpm Tool swing diameter 125 - 180 mm Rebating unit including tool Hardened table insert in front of 1st (bottom) spindle 2nd spindle (right) 12.1 kW (motor replaced) ----- Shared motor with left vertical spindle Diameter 40 mm Speed ??8,000 rpm Tool swing diameter 112-250 mm Max. Tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 3. Spindle, left ----- Shared motor with 2nd spindle Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-200 mm Max. groove depth 35 mm Axially travel 80 mm Pressure shoe in front of left spindle, including spring-loaded lateral roller pressure 4. Spindle, right 8.3 kW (motor replaced) ----- Diameter 40 mm Speed ??8,000 RPM Tool swing diameter 112-250 mm Max. tool diameter behind stop plane 203 mm Max. groove depth 35 mm Axially travel 80 mm 5. Spindle, top 7.5 kW ----- Diameter 40 mm Speed ??8,000 rpm Tool travel 112-200 mm Max. groove depth 35 mm Axially travel 45 mm Split pressure shoe in front of upper spindle, adjustable to the tool travel and pivoting away from the tool, spring-loaded. 6. Lower spindle 4.0 kW ----- Diameter 40 mm Speed ??6,000 rpm Tool travel 112-250 mm Max. groove depth 15 mm Axially travel 45 mm Spindles in general ----- All groove spindles with high concentricity. Lubrication points for the axial spindle movement. Feed system ----- Motor with mechanical brake, 4 kW Mechanical feed infinitely variable 5-24 m/min. Feed roller in front of the first lower tool pneumatically controlled up/down, Durofer pointed tooth rollers (Weinig patent) with depth limiter and self-cleaning Adjustment travel of the feed rollers relative to the left spindle, axial 35 mm Machine electrical system ----- Operating voltage 440 V (voltage range 380 - 420 V), 50 Hz. Machine frame, tables and stops ----- Infeed table 2.0 m long (incl. jointing guide) Manual Waxilit pump for table de-resin removal One driven rubber roller (spring-loaded in the outfeed table) Two driven rollers in the machine table, hardened Machine operation ----- Pressure shoe in front of the upper spindle with mechanical digital display. Extraction after the upper spindle with mechanical digital display. ATS/System, automatic 2-axis positioning for spindles 3 and 5 Minimum working height 12 mm Electric height adjustment of the upper spindles and the feed Central lubrication points on the front of the machine Electronic digital displays on spindles 3 and 5 (axial), spindle 6 (radial) and spindle 4 (axial and radial) Safety and noise reduction ----- Full safety enclosure Easily hinged safety hood with window. Covers the ent...

Condition: good (used), Year of construction: 1962, Large band saw with a 1250 mm roll diameter with central cutting device Crsdpfx Ajfnh T Isbwoi 45 kW motor Roll width 120 mm with electric blade tensioning the upper roll has been removed for transport in very good condition, as it has been used little and was overhauled in 1997.

Condition: used, Year of construction: 1972, table-size 670 x 670 mm throat 1030 mm workpiece height max. 300 mm saw band length min. 4700 mm saw band length max. 4800 mm sawing motor 2,2 kW total power requirement 3,2 kW weight of the machine ca. 1,0 t dimensions of machine L x W x H 2,31 x 1,05 x 2,03 m Cedjtqqrkjpfx Abweri Accessories: saw band welding and grinding attachment - table swivelling left / right - hydr. feed in table

Condition: excellent (used), Working width: 1,360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 2,160 x 2,260 x 2,025 mm Weight: approx. 2,200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically controlled (timed) for veneer sanding Codpfsych Igex Abwsri 3rd unit: Cleaning brush Abrasive belt oscillation with selector switch Feed conveyor oscillation pneumatic Motorized workpiece thickness adjustment with LED display Units equipped with emergency brake device Emergency stop button at infeed Roller table extension at infeed Complete documentation included Note – Used machines: • Subject to technical changes and prior sale. • Prices quoted are ex location – loaded on truck! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, with no warranty or guarantee. Buyers are free to inspect the machines at the site. • Special agreements are only valid in writing. (We will only respond to inquiries that include your address and telephone number!)

Condition: used, Technical data: Track width: 300 mm Max cutting height: 100 mm Max saw blade diameter: 300 mm Smooth feed regulation Automatic lubrication system Antireflection protection Culaga Extraction port: 2x160 mm Safety switch Power supply: 380 V Engine power: 22 kW Producer: Gabbiani Machine dimensions: Length: 1630 mm Width: 1800 mm Height: 1450 mm Crjdsh E R Utspfx Abwji

Condition: used, Year of construction: 2022, Hardwood Azobe boards, sourced from our own semi-trailer low-loader. Trailer is from 2022 Dimensions; Cjdpjz Hmqqefx Abwsri - 6 pieces - 275 x 19.5 x 4.5 cm. - 8 pieces - 262 x 19 x 4.5 cm. - 6 pieces - 95 x 19.5 x 4.5 cm. - 8 pieces - 91.5 x 21.5 x 4.5 cm. - 8 pieces - 43 x 21.5 x 4.5 cm. - 10 pieces - 68.5 x 17.5 x 3 cm.

Condition: used, The machine is for sale together with all tools as shown in the pictures. Crodpfxjy Rumto Abwsi

Condition: used, Year of construction: 2024, total length: 8,430 mm, · Plattformhöhe 18.35 m · Überhang / Knickpunkt Gelenk 8 m · Korbarm-Drehwinkel (oben / Boden) +69 ° / -66 ° · Drehung des Oberwagens 355 ° · Drehung des Arbeitskorbs (rechts / links) 90 ° / 90 ° · Anzahl Personen (innen / außen) 2 / 2 · Bodenfreiheit Mitte Radstand 0.44 m · Radstand 2.40 m Cedpexd Hikofx Abwjri · Fahrgeschwindigkeit - Transportmodus 4.70 km/h · Fahrgeschwindigkeit - Arbeitsmodus 0.80 km/h · Steigfähigkeit 40 % · Zulässige Neigung im Arbeitsmodus 5 ° · Antriebsräder (vorne / hinten) 2 / 2 · Lenkräder (vorne / hinten) 2 / 2 · Gebremste Räder / Räder 0 / 2 · 230-V-Anschluss · 4 Allradlenkung mit hundeganglenkung · 4 gleichzeitige Bewegungen · Alarmton und Kontrollleuchte (Neigung, Überlast, Gefälle) · CAN-Bus-Technologie · Differentialsperre an der Hinterachse · Elektrische Notpumpe · Engine with DPF · Korb verzinkt 2.100 mm · Pendelvorderachse · Proportional-Regelung · Stop & Go · Stufenweise Drehzahlregelung · Totmannpedal · Vorderachse mit Schlupfbegrenzung · großes Farbdisplay an der Bodensteuerung · Innerer Wenderadius 1.26 m · äußerer Wenderadius 3.90 m · Motornorm Stage V · Nennleistung Verbrennungsmotor / Leistung (kW) 34 Hp / 25.50 kW · Bodendruck 20.65 dan/cm2 · Hydraulikdruck 340 bar · Fassungsvermögen des Hydrauliktanks 80 l · Fassungsvermögen des Kraftstofftanks 78.50 l · Umweltschädliches NOX 2.61 kg

Condition: used, Year of construction: 2001, spindle diameter: 40 mm, total width: 2,000 mm, total height: 1,900 mm, total length: 3,800 mm, overall weight: 3,500 kg, input voltage: 400 V, number of spindles: 5, input frequency: 50 Hz, No. 04556 Four-sided planer WEINIG Unimat 23 E Used, year of construction 2001 Spindles (bottom - right - left - top - bottom) All spindles Ø 40 mm, spindle motors with mechanical brake 1. Bottom spindle (surfacing spindle): 5.5 kW, with rebating device 2. Right spindle (jointing spindle): 7.5 kW 3. Left spindle: shared drive with right spindle (7.5 kW) 4. Top spindle: 5.5 kW 5. Bottom spindle: 11 kW Spindle speed 6000 rpm Working range Workpiece width with tool diameter 140 mm: 20 - 230 mm With aluminium planing heads, a working width of 260 mm is possible Workpiece height with tool diameter 163 mm: 8 - 120 mm Cjdpfxo Afb Eao Abwsri Infeed table with jointing fence, length 2,000 mm Control and adjustment ATS positioning control with Siemens SIMATIC OP7 operator panel Left spindle: automatic positioning forward - backward Top spindle: automatic positioning up - down Motorised height adjustment of the feed, 1.1 kW adjustment motor with brake Mechanical digital readouts on the spindle adjustments Feed Feed motor 3 kW with brake Feed speed 6 - 36 m/min, infinitely variable via handwheel Serrated feed rollers, driven by cardan shafts Short workpiece package for processing short pieces Top pressure rollers, swing-away Axial adjustment of the feed rollers relative to the left spindle Pneumatic pressure system with pressure reducing unit, 3 pressure regulators with gauges on the control desk Pressure shoes and tables Pressure shoe before top spindle, swing-away Pressure shoe after top spindle with wooden insert Table plate with wooden insert at bottom spindle 5 Anti-kickback device on the infeed table Manual Waxilit pump for removing resin from the table Central lubrication points on the front of the machine Safety and noise protection Full soundproof enclosure with viewing window and interior lighting CE marking, BG-tested (wood dust tested) Chip extraction connection diameters 140 mm and 200 mm Power supply 400 V / 50 Hz Scope of delivery 5 planing heads, mounted on the spindles Various spare parts: feed rollers, spacer rings, drive belts, table inserts, operator tools Complete technical documentation Transport dimensions approx. 3800 x 2000 x 1900 mm LWH Weight approx. 3500 kg To avoid possible misunderstandings, an on-site inspection by appointment is possible and recommended Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer’s brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Payment terms: Prices plus VAT, payment before collection or shipment Delivery terms: ex warehouse

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 1,080 h, load capacity: 227 kg, empty load weight: 10,362 kg, construction height: 2,560 mm, fuel type: diesel, total length: 9,250 mm, drive type: Diesel, arm reach: 12,470 mm, construction width: 2,490 mm, working height: 20,870 mm, Articulated boom lift Condition: Ready for operation and fully functional Technical condition: good Front tyres type: pneumatic Front tyres size: 355/55D625 NHS Rear tyres type: pneumatic Rear tyres size: 355/55D625 NHS Cjdpfszrb U Rox Abwsri