Parts washer, spray washing machine
Glogar CM 13 - 2 Tank

Name: Glogar CM 13 - 2 Tank
Brand: Glogar
Availability: InStock

Year of construction

2026

Condition

Ex-display machine

Location

Linz-Land

Parts washer, spray washing machine Glogar CM 13 - 2 Tank

Machine data

Machine type:: Parts washer, spray washing machine

Manufacturer:: Glogar

Model:: CM 13 - 2 Tank

Year of construction:: 2026

Condition:: as good as new (ex-display)

Operating hours:: 1 h

Price & Location

Location:: Tagerbachstraße 10, 4490, Österreich

Call

Details about the offer

Listing ID:: A18819796

Update:: 13.05.2026

Description

Parts Cleaning System / Spray Cleaning System Type CM13
2-Tank (Washing + Rinsing) including air knife blow-off

Basket Diameter: 1,300 mm (octagonal)
Max. load capacity: 1,000 kg
Basket is loaded and unloaded by the operator using a transfer cart (detachable/mobile) positioned in front of the machine.
Useful height: 800 mm
Wash tank: Volume: 430 liters, Spray pressure: 6.0 bar
Rinse tank: Volume: 280 liters, Spray pressure: 4.0 bar
Total connected load: approx. 52 kW
Bedpfov Tm Ayox Apveli
Control: Siemens S7-1200 with KTP700 touch panel

Including the following features:
+ automatic water refill for both tanks
+ automatic chemical dosing 1-10% (Dosatron)
+ special spray system (can be optionally activated) for small components (= E-spray system)
+ side channel blower with height-adjustable air knife system (blow-off drying)
+ steam extraction including condensate return
+ weekly timer for electric heating
+ pre-configured for retrofitting an oil separator
+ media filtration via bag filter (manufacturer Eaton, Topline) in both circuits (washing and rinsing)
+ external cladding with stainless steel sheet
+ complete system fully insulated
+ tanks separated into two modules; fully insulated (different temperatures possible)
+ removable filter baskets in the return flow
+ stainless steel circulation pumps incl. mechanical seal and soft starter

The system is exhibited at the Glogar Technology Center and is used exclusively for washing trials.

The listing was translated automatically. Translation errors are possible.

Seller

Registered since: 2016

49 listings online

Call

Send inquiry

Telephone & Fax

+43 7224 ... show

Fax:

These listings may also fit your interest.

Listing

Linz-Land

1,456 km

Car wash
GlogarL122

Call

Condition: new, Year of construction: 2025, Parts cleaning machine, spray cleaning system, type L122 Automatically operating hot water chamber cleaning machine with basket drive via geared motor, machine housing made of stainless steel 1.4301, - 2 sets of three-sided arranged nozzle systems made of stainless steel with stainless steel flat jet nozzles, - 2 stainless steel washing pumps (manufacturer: Xylem/Lowara), Bsdpfx Apjf Dy Rwovjli - Level control as dry-run protection - 2 suction filters as pump protection - Oil skimmer for bath maintenance - Basket diameter: 1,150 mm - Usable height: 700 mm - Max. load weight: 300 kg - Spray pressure: 2 x 3 bar - Tank volume: 270 liters - Heating: electrically adjustable (RT - 60°C) - Connection power (electrical): approx. 11.5 kW - Machine dimensions (W x D x H): 1,480 x 1,540 x 2,195 (h) mm

See details

Listing

Sevenum

766 km

Tray loader
Breda PackagingUnipack T

Call

Listing

Multispindle Lathe Schütte AG20 Schütte AG20

Berlingo

1,450 km

Multispindle Lathe Schütte AG20
SchütteAG20

Call

Listing

Germany

919 km

Oak threshold sleeper threshold

€69

ONO plus VAT

Call

Condition: new, Length: 2,600 mm / Cross-section: approx. 150 x 260 mm New oak sill We offer a new oak sill for sale here. Shipping costs upon request! The scope of delivery includes: 1x NEW oak sill made of sessile oak (Quercus cerris) Length: approx. 2600 mm Height: approx. 150 mm Width: approx. 260 mm Weight per piece: approx. 110 kg Individual tree bark edges may be present. Bljdpfx Aocmculjpvsi We are available to answer any questions you may have.

See details

Listing

Cleaning system - Top loader Glogar TR450

Linz-Land

1,456 km

Cleaning system - Top loader
GlogarTR450

€17,350

Fixed price plus VAT

Call

Year of construction: 2026, condition: as good as new (ex-display), Parts cleaning machine / spray cleaning system, type TR450 The spray-rotation cleaning system, type TR450, is an automatic cleaning and degreasing system with a lid that can be easily opened upwards. The system is designed for cleaning individual parts and/or bulk goods in baskets with dimensions of L x W x H 520 x 320 x 200 mm. For the cleaning process, the basket must be closed with a lid. The cleaning result depends on the fact that the parts in the basket can be slightly tumbled when cleaning bulk goods. The fill level in the basket must be taken into account for this purpose. The system is also equipped with a flood basin under the parts basket, which enables the parts to be immersed and scooped out, resulting in an even better cleaning result. including the following equipment: • Completely made of stainless steel 1.4301 inside and outside • Level monitoring and automatic fresh water refill • Insulation of the entire system • Hot air drying (power: 11.6 kW) • Steam extraction • Oil skimmer for bath maintenance Bjdpfx Apjfbt Sisveli • Automatic fresh water refill • 1 small parts basket 520 x 320 x 200 mm, mesh size: 6 x 6 mm, incl. height-adjustable locking lid Connection power: approx. 20 kW (32 amp plug)

See details

Listing

Parts washing machine for metal parts Glogar L800FP

Linz-Land

1,456 km

Parts washing machine for metal parts
GlogarL800FP

Call

Condition: as good as new (ex-display), Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Bljdpeuxuv Asfx Apvei

See details

Listing

Linz-Land

1,457 km

Parts washing machine for metal parts
GlogarL800FP

Call

Condition: new, Year of construction: 2026, These parts washers are designed for spray washing, using aqueous detergents at a temperature of 60°C maximum. All machines are made of AISI 304 stainless steel and they are models for one wash treatments. These machines function thanks to the basket’s motorized rotation around its vertical axis and they are suitable for washing small and medium-sized parts, with moderate weights. Bodpfxjhl H Ube Apvjli

See details

Listing

Bar Automatic Lathe - Multi Spindle SCHÜTTE AF42

Germany

967 km

Bar Automatic Lathe - Multi Spindle
SCHÜTTEAF42

Listing

Tool Room Milling Machine - Universal AVIA FNE 40 NC / TNC 320

Dreieich

1,010 km

Tool Room Milling Machine - Universal
AVIAFNE 40 NC / TNC 320

Call

Condition: used, Year of construction: 2007, x-travel 620 mm y-travel 420 mm z-travel 400 mm control TNC 320 HEIDENHAIN spindle taper ISO 40 spindle turning speed range 50 - 4.000 U/min table-size 800 x 400 mm table load 400 kg feeds -stepless- 0 - 8000 mm/min rapid traverse 8,0 m/min power capacity 6,0 kW quill stroke 80 mm voltage 400 V total power requirement 17,0 kW weight of the machine ca. 2,1 t dimensions of the machine ca. 1,90 x 2,70 x 2,05 m - .: 90288 - Control: TNC --- - electrical hand wheel Blsdpjyq Sv Dsfx Apvsi - Horizontal milling spindle - Coolant equipment

See details

Listing

Top Loading Parts Washers DOLFIN INDUSTRIAL PARTS WASHING MACHINE LYM1-2-Top loading

Turkey

3,147 km

Top Loading Parts Washers
DOLFIN INDUSTRIAL PARTS WASHING MACHINELYM1-2-Top loading

Call

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley. Bjdpfx Apov Sa I Tjveli

See details

Advertise here