Used Ema 201 for sale (4,764)

Year of construction: 2001, condition: used, Automatic feed via Elgo control 255 For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm Gusdpjzh Itfefx An Iog

Condition: good (used), functionality: fully functional, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 11/2013, loading space length: 7,300 mm, suspension: air, Year of construction: 2013, Equipment: ABS, tail-lift, GOOD CONDITION Gujdpfezm Ev Iox An Ijg

Condition: used, Automatic feed via Elgo control E 255 For attachment to any Elumatec single-head saw (right) Max. push length: 3000 mm Godpsywxwpsfx An Isug

Condition: excellent (used), functionality: fully functional, empty load weight: 6,760 kg, maximum load weight: 11,250 kg, overall weight: 18,000 kg, axle configuration: 2 axles, next inspection (TÜV): 09/2026, loading space length: 7,300 mm, Year of construction: 2018, Equipment: ABS, cooling unit, tail-lift, Equipped with Thermoking With TÜV certification Year of manufacture: 2018 Guedey Urdkspfx An Iog 18 tons gross vehicle weight

Year of construction: 1993, condition: excellent (used), Maximale Positionierlänge: 2600-3000 mm Anschlag- und Mess-System mit E 255-Steuerung für die Schnittlängenpositionieru Guedpfx Aofibfnon Ijg Zum Anbau an alle 1-Kopf-Sägen (Recht)

Condition: excellent (used), For sale: Mannesmann Demag AF06-L-M-0-145-1 geared motor with a three-phase Demag ZBA90 A4 B020 motor. The unit is fully functional, tested, and ready for operation. The visual condition is good, with normal signs of use. Notes: * One mounting lug has been cut – this does not affect the operation or correct mounting of the geared motor. * There is a small crack on the plastic motor cover, which does not affect the operation of the unit. Technical data: Manufacturer: Mannesmann Demag AG Gearbox model: AF06-L-M-0-145-1 Motor model: Demag ZBA90 A4 B020 Power: 1.1 kW Gusdozpbufopfx An Isg Supply: 3×400 V AC, 50 Hz Brake voltage: 180 V DC Rated current: 2.80 A Motor speed: 1400 rpm Output speed: approx. 23 rpm Gear ratio: i = 60.1 Brake torque: 20 Nm Cos φ: 0.75 Ingress protection: IP54 Insulation class: F Weight: 21.2 kg

Condition: used, Year of construction: 2017, Overview  This Krones Sleevematic sleeve applicator from 2017 is in excellent condition with only 1,563 running hours. The machine is capable of applying sleeves at a speed of up to 30,000 bottles per hour (500 BPM). It is equipped with a 2-head sleeve applicator system and a steam-operated shrink tunnel (Shrinkmat). Bottle handling change parts for 300 ml, 500 ml, and 1500 ml PET bottles are included. Technical Data Gedpfx Answlka Ej Ieug - Capacity: 30,000 bottles/hour (500 bottles/min) - Sleeve Applicators: 2-head sleeve feed system - Shrink Tunnel: Steam-operated (Shrinkmat) - Bottle Formats: 300 ml / 500 ml / 1,500 ml - Condition: Very good, low operating hours - Operating Hours: 1,563 Scope of Delivery - Krones Sleevematic sleeve applicator - 2-head sleeve feed system - Shrink tunnel (steam) - Bottle format parts for 300/500/1500ml PET bottles

Condition: used, Year of construction: 2017, - 4 belt grinding units - Frequency control for all units - Electronic grinding pressure control Universal edge and profile grinding machine Manufacturer: Heesemann Type: UKP 20 Year of manufacture: 2017 Technical data Workpiece transport system - Total length: 5015 mm - Driven by a 1.5 kW three-phase motor with a double chain for workpiece transport - Feed rate in the range of 5-25 m/min, frequency-controlled - Working height constant at 880 mm - incl. integrated control cabinets - incl. adjustable guide rail with digital display and incl. counter rail with central width adjustment 4 lateral guide rollers between the grinding units for secure transport of workpieces Industrial PC 10.4" - LCD-TFT color display - Touch screen version Gusdozuzb Aopfx An Isg - with display for production and downtime - with program memory for 100 programs 2 belt grinding units "M 4" Pos. 1 and 2 - for grinding straight edges - Belt dimensions: 2300x80 mm - Belt speed: 0.7-12 m/s - Motor power: 3.0 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 2 oscillation units for "M4" (Pos. 1+2) For complete utilization of the grinding belt 2 belt grinding units "K 4" Pos. 3 and 4 - for grinding small profile sections - can also be used for edge breaking - Can be swiveled 90 degrees upwards and 45 degrees downwards - Belt tear switch - Tool holder with quick-change device - Intermittent belt extraction device - Belt dimension: 2000x50 mm - Belt speed: 0.5-8 m/s - Motor power: 1.1 kW - with electronic frequency control for stepless control of the belt speed - Electronic grinding pressure control from the terminal 4 electronic control units - for the fully automatic timing of the lowering and raising of the grinding tool, depending on the set feed rate, the grinding pressure and the unit angle setting Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, Year of construction: 2017, operating hours: 21,000 h, clamping force: 100 kN, displacement volume: 46 cm³, injection pressure: 2,400 bar, overall weight: 4,500 kg, screw conveyor diameter: 22 mm, terms of delivery: FCA Pegnitz delivery time: on request Gujdpfx Anezz Aw Sj Isg terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2017, Machine type Vertical CNC turning center Manufacturer EMAG GmbH & Co. KG Gedoyyazbspfx An Ioug Model VL 4 Year of manufacture 2017 Control system Fanuc 32i-B CNC Number of axes 3 (X, Z, Y-Axis) Tool turret 12 stations, including fixed and driven holders (BMT65) Max. chuck diameter 260 mm (10.2 inches) Max. workpiece diameter 200 mm (7.9 inches) Max. workpiece length 200 mm (7.9 inches) X-axis 740 mm (29.1 inches) Z-axis 400 mm (15.7 inches) Y-axis ±30 mm (±1.18 inches) Rapid traverse X-axis 60 m/min Rapid traverse Y-axis 15 m/min Rapid traverse Z-axis 30 m/min Power (40% cycle) 25 kW (33.5 hp) Power (100% cycle) 18 kW (24 hp) Torque (40% duty cycle) 280 Nm Torque (100% duty cycle) 202 Nm Max. speed 4,500 rpm Machine weight Approx 10,000 kg Machine dimensions (L × W) Approx 6,000 mm × 3,600 mm

Condition: used, Year of construction: 2017, Overview This sleeve labelling and shrinking system was manufactured in 2017 by Germany Krones. The system consists of a Krones Sleevematic sleeve applicator and a Krones Shrinkmat shrink tunnel, designed for the application and shrinking of sleeve labels on bottles and containers of various formats. Technical data - Formats: Various bottle and container formats - Application: Sleeve labelling and sleeve shrinking - Configuration: Krones Sleevematic sleeve applicator + Krones Shrinkmat shrink tunnel - Labelling technology: Sleeve labels Scope of Delivery Godpsztan Esfx An Ijug - Sleeve applicator | Krones | Sleevematic | 2017 | Sleeve label application machine - Shrink tunnel | Krones | Shrinkmat | 2017 | Sleeve shrinking system

Condition: used, Year of construction: 2018, Overview The crater was manufactured and taken into operation in 2018 by the German company Sema Maschinenbau GmbH. Till now it was used in a filling line for fresh milk in glass bottles in a German dairy company. The line capacity was 7,700 bph. As the request for milk in bottles was increasing during the lat year, the owner decided to purchase a new line with increased capacity. Therefore this machine has become available. The machine is still in very good condition, as it is still young and only with a low number of operating hours.   Tech Specs: Capacity: 695 crates (of 12 bottles) per hour  1333 crates (of 6 bottles) per hour Formation: 2x3 (1l bottle) 4x6 (0,5l bottle) Gripper heads: for wide bottle neck (can be adapted)     Gjdpfxol Hx Dme An Ieug

Condition: excellent (used), Year of construction: 2015, Equipment: documentation/manual, Clamping force: 100 t Opening max: 500 mm Mould heigh: 250 mm Platen size: 590x600mm Guedpfx Ansyg Eu So Ieg Distance between tie bars V: 420 mm Distance between tie bars H: 420 mm Type: Horizontal Drive: Hydraulic Screw diameter: 30 mm Injection weight: 103 g Injection volume: 115 cm3 Injection pressure: 2755 Hours: 42493 extra equipment: 1. 2 hydraulic core pull circuits on moving platen (proportional valves) 2. Additional connections for 2 core pulls on fixed platen 3. Pneumatic core pull (2 circuits) on moving platen 4. 4-zone cooling water flow controller with temperature display 5. Compressed air blow valves on fixed and moving platens (programmable) 6. Integrated hot runner control, 8 zones 7. Interfaces for external nozzle heating bands 8. Interface for integrated temperature control units (up to 6 circuits) 9. Interface for mould temperature monitoring (2 circuits) 10. EUROMAP 67 for automation equipment

Condition: excellent (used), Year of construction: 2015, year of last overhaul: 2025, Demag Systec 210-840 (2015) SERVO Manufacturer: Sumitomo SHI DEMAG Type of machine: Systec 210/580-840 Clamping force [kN]: 2100 Shot volume [cm³]: 358 Clearance between tie bars hor. [mm]: 580 Clearance between tie bars vert. [mm]: 580 Mold height min. [mm]: 340 Mold height max. [mm]: 690 Opening stroke max. [mm]: 575 Daylight max. [mm]: 1365 Year of manufacture: 2015 Machine dimensions L/W/H [mm]: 6022 / 1556 / 2090 Control unit and software version: NC3 Max. weight of entire molding tool [kg]: 3300 Screw diameter [mm]: 45 Screw design: 3 zone Screw relation (length/diameter): 20:1 Screw back flow valve: Yes Ejector system type: Hydraulic Installed heating power [kW]: 39 No. of integrated hot runner circuits: 12 Gedszbg Ezspfx An Isug Number of temperature control electrical valves: 28 Number of cascade controls: 2 Connection to central drying system: Yes Unloading robot system available: Yes Number of tempering units: 3 Tempering units max. temperature [°C]: 160 Machine oil capacity [l]: 400 Net power of hydraulic pump engine [kW]: 26

Condition: used, Year of construction: 2011, operating hours: 66,800 h, clamping force: 100 kN, displacement volume: 85 cm³, injection pressure: 2,000 bar, overall weight: 4,500 kg, screw conveyor diameter: 30 mm, terms of delivery: FCA Pegnitz delivery time: on request Guodpjzx Hkkofx An Isg terms of payment: 100% prior to delivery

Condition: used, Year of construction: 2008, operating hours: 35,000 h, clamping force: 100 kN, displacement volume: 51 cm³, injection pressure: 2,800 bar, overall weight: 5,000 kg, screw conveyor diameter: 25 mm, Freight base: FCA Pegnitz Delivery time: by arrangement Guodpjwlkb Njfx An Ijg Payment terms: 100% before takeover of the machine, net

Condition: excellent (used), Year of construction: 2014, Clamping force: 650 t Screw diameter: 60 mm Injection volume: 891 cm3 Shot weight: 810 g Distance between tie bars V: 1020 mm Distance between tie bars H: 1020 mm Platten dimensions H x V: 1450 x 1470 mm Max. oppening stroke: 930 mm Min Mould installation height: 450 mm Type: Horizontal Drive: Hydraulic \+ Cooling water flow controller (2x 6 circuits) \+ Robot Sepro SR SDR5X35 HL S5 TRANS (2014) Hot Runners 1. 24-zone integrated hot runner controller (ZE 273) 2. 32-zone integrated hot runner controller on fixed platen (ZE 274), extended to 36 zones (SO 10) 3. Pneumatic needle valve nozzle control, 1× 5/2-way valve (ZE 276) 4. Hot runner connector upgrade for 24 zones (SO 01) 5. Total: 60 zones across two controllers Equipment Highlights Injection 1. Electric screw drive, frequency-controlled (WA 313) 2. High-speed injection with central accumulator, servo-valve controlled (WA 361 + SO 12) 3. 4-fold pneumatic cascade injection + Gammaflux cascade interface (SO 05 + SO 08) Quality & Process Monitoring 1. Priamus cavity pressure measurement + BlueLine integration (SO 02 + SO 04) 2. Holding pressure switchover with peak value capture and recording (ZE 350) 3. 100% process data recording (PDE) with statistics and graphics (ZE 420) Mold & Core Pulls 1. 4 core pull circuits via proportional valves, flow-independent (ZE 234 + ZE 237) 2. Electric pressure relief for core pulls (SO 27) 3. Separate pneumatic hot runner needle (SO 04x) Quick Mold Clamping 1. Full quick-clamp system — interface, power supply, installation & testing (SO 23a–d) Connectivity & Automation 1. OPC/UA interface for host systems (SO 5631) 2. WC5 World Connect — remote access and service (ZE 571) 3. Integrated BDE/PDE production data management (ZE 471 + ZE 420) 4. Demag robot interface via CAN bus (ZE 752) Energy & Infrastructure 1. Integrated energy monitoring with per-part cost calculation (ZE 4921) 2. Elastic machine mounting / vibration isolation (WA 180) Guodpfx Ansyzylvs Ieg \+ 2x Magnetic platten

Condition: good (used), Year of construction: 2009, functionality: fully functional, power: 50 kW (67.98 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, Induction hardening system EMA-INDUTEC with robotic loading Year of manufacture: 2009 Control system: Siemens Power: 50 kW Guodozv U Raopfx An Ijg Fanuc robot Infeed and outfeed conveyor Further data available upon request.

Year of construction: 2016, operating hours: 15,027 h, condition: used, functionality: fully functional, machine/vehicle number: E21SH16032509528, This is a combination steamer SCC 201 WE, in an electric version, from the premium manufacturer Rational, manufactured in 2016. With only 15,027 operating hours! The combination steamer is located in our in-house workshop and will undergo a thorough inspection and is sold with a 6-month warranty. The list price is €21,940 net. You will receive an invoice with VAT shown. Service: We will gladly assist you in arranging a certified Rational service technician nationwide. Are you looking for a specific Rational appliance type? Ask us, we have access to a wide range of used and new equipment. We will be happy to advise you on all appliance types, whether SCC, CM, CMP, VCC, iVario, iCombi Classic and Pro. Our used equipment service for you: 6-month warranty on all electrical parts, limited to the replacement of defective parts, without installation and removal costs High-quality branded equipment at fair prices Professional overhaul / inspection & expert cleaning Tested & fully functional Flexible shipping or self-collection options Competent advice - before and after purchase Provision of operating instructions, connection diagrams & spare parts Testing according to DGUV V3 This combination steamer offers space for 20 x 1/1 GN containers. In automatic mode, the appliance independently recognizes the ideal cooking path, the size of the food, the quantity loaded, and the product-specific requirements for 7 applications (meat, fish, poultry, side dishes, egg dishes, baked goods, and finishing). Technical data: W x D x H: approx. 879 x 791 x 1782 mm Minimum door opening dimensions for transport WxH: 925x1900mm Power connection: V: 400 / kW: 37.0 / Hz: 50/60 Weight: approx. 268 kg Serial number: E21SH16032509528 Year of manufacture: 2016 Capacity: 20 x 1/1 GN or 40 x 1/2 GN Longitudinal loading: 1/1, 1/2, 2/3, 1/3, 2/8 GN Meals per day: 150-300 Condition: used, inspected, fully functional Further details: In combination steamer mode, 3 operating modes are available: steam (30°C to 130°C), hot air (30°C to 300°C) and combination (30°C to 300°C) Core temperature sensor Integrated energy optimization Care Control - self-cleaning Handheld spray gun with automatic retraction 8.5-inch color display and touchscreen 5 fan speeds programmable Integrated, maintenance-free grease separation system Automatic start time preselection 7 cleaning levels for unattended cleaning - also overnight Humidification adjustable in 3 levels - from 30°C to 260°C 5 programmable proofing levels USB interface Seamless, tub-shaped hygienic cooking chamber, rounded corners Halogen cooking chamber lighting Shipping: Guodpfx Anozd Ahio Ieg Delivery or self-collection by arrangement Worldwide shipping on request Shipping to islands or mountain stations only by arrangement Subject to change and errors.

Condition: used, Year of construction: 2012, operating hours: 5,598 h, Bomag BW213PDH-4 roller from year 2012 with only 5,598 operating hours! ----* Manufacturer: Bomag * Model: BW213PDH-4 * Year of manufacture: 2012 * Recorded operating hours: approx. 5,598 * Operating weight: 13,100 KG * A/C – air conditioning * German machine * 119 kW * Deutz diesel engine * Additional photos and video available upon request * Price: €39,900 net + 19% VAT ----For further questions, please call: Erik Kortum: WhatsApp Kai Kortum: WhatsApp All information provided without guarantee; errors and prior sale excepted. Guedpfx Ansyt Uirs Ijg

Year of construction: 2014, condition: excellent (used), functionality: fully functional, Complete 'Bag-in-Bag' forming system, previously used to produce multipacks of crisps. System comprises of: Godpfeyvac Aex An Ijug 1 x Feed hopper and steps/gantry. 1 x Comek s.r.l. infeed swan-neck / 'Z' conveyor. Manufacturer – Comek s.r.l. 1 x Comek s.r.l. / Propema VPB 400 vertical form, fill and seal bagging machine. Manufacturer – Comek s.r.l./Propema S.r.l. Date of manufacture – 2014. Sealing jaws - 380mm horizontal & 620mm vertical. Film width - up to 810mm wide. 1 x Markem Imaje SmartDate X65 128mm thermal transfer printer. Manufacturer – Markem-Imaje. Date of manufacture – 2021. 1 x Flash label applicator (never used / required for seller's products). 1 x Hole punch (3mm) to help deflate the multipack bags into large boxes. 1 x Comek s.r.l. outfeed inclined conveyor. Manufacturer – Comek s.r.l. Belt width - 400mm wide. Conveyor length - 1800mm long. 1 x 1.2m diameter stainless-steel Lazy Susan / rotary packing table. Height - 750mm (height-adjustable feet). This system was producing bulk multipack bags of 3 x different flavours of bags of crisps. Speed - up to 18 packs/minute. Footprint of system - 7.3m long x 2.7m wide x 3.5m high (infeed conveyor to lazy susan).

Condition: excellent (used), CATALOG NO. 7227 TECHNICAL DATA - Working width: 40 – 300 mm - Material thickness: 10 – 35 mm - Min. material length: 270 mm - Max. material length: unlimited - Max. feed speed: 90 m/min - Feed speed steplessly adjustable via inverter from control panel - Cutting speed: 24 m/min - Milling motor power: 2x 4 kW - Milling spindle speed: 7,500 rpm - Feed motor power: 0.75 kW - Pneumatic top and side pressure - Spindle diameter: 40 mm - Motor-driven infeed roller conveyor, length 1,130 mm - Manual / automatic operation - PLC controller with touchscreen for easy operation - Compressed air connection: 8 bar Guedpfx Aszrvccon Ieg - Extraction outlet diameter: 150 mm - Dimensions (L/W/H): 2,550 x 1,200 x 1,400 mm - Weight: 1,100 kg ADVANTAGES – German manufacturing – Operating and maintenance documentation (DTR) – Machine for tongue and groove profiling – Set includes complete cutter and head set – Motor-driven infeed roller conveyor – Unpainted – Used machine, in very good condition Net price: 107,900 PLN Net price: 25,690 EUR (according to exchange rate 4.2 EUR/PLN) (Prices may vary depending on currency fluctuations)

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, overall weight: 12,000 kg, input voltage: 415 V, input current: 70 A, input frequency: 50 Hz, Complete 2010 Rademaker Pie Line, capable of producing up to 5,280 filled savoury pies (with lids) per hour. Manufacturer - Rademaker B.V. Maximum mechanical speed – up to 22 strokes / minute. Output capacity – up to 5,280 pies / hour. Electrical requirements – 415 V / 50 hz / 3 phase. Power – 70 Amps (approx.). Weight of complete line – 12,000 kg. This production line comprises of the following equipment/machinery: 1. 2 x sets of tooling complete with trollies, one set for pies with casing diameter of 110mm. 2. Electrical control panel (with data plate ‘PIE LINE’ on). 3. Inclined flighted conveyor for loading of pastry sheets. 4. Overhead transfer conveyor (used to feed 'STRIPFEEDER') operating at 2.4m high along the length of the line. 5. Rademaker ‘STRIPFEEDER’ with denester for dropping pie cases. 6. Rademaker Tamping unit 1 (used to tamp the dough round into the pie casing). 7. Rademaker ‘DEPOSITOR’ 6-lane depositing system with hopper and pump. Gjdpfxjzvmy Hj An Ieug 8. Rademaker ‘TAMPING UNIT’ 2 for tamping filling down into casings. 9. Rademaker ‘LID DOUGH CONVEYOR’ for dropping lids onto filled pies. 10. Dutch Thermal Engineering b.v. (DTE) V-009.0 thermostat for regulating temperature of water bath sat under main conveyor holding pie casings. 11. Rademaker Crimping unit / marking unit for putting pattern into casing lid and ensuring it is secured onto pie. 12. Rademaker Pie exit/discharge conveyor. 13. Rademaker ‘DOUGH RETURN SYSTEM’ for excess pastry. 14. Rademaker ‘SPOT DEPOSITOR’ for 5-across over line depositing. 15. Unnamed egg-glaze mixing vessel and pump, mounted on mobile frame. NOTES – BUYER TO REMOVE FROM SITE.

Condition: used, Year of construction: 1995, functionality: fully functional, machine/vehicle number: 4755, input voltage: 380 V, Winding machine suitable for the production of low-voltage transformers, coils, electromagnets, and various types of linear windings. Guedpjy Enk Iofx An Iog

Condition: repair required (used), Year of construction: 1998, functionality: not functional, input voltage: 400 V, input current: 16 A, overall weight: 15,000 kg, NEEDS REPAIRING Guodpfx Anjzc I D Ij Isg