Slitter rewinder

Goebel

Condition: good (used), functionality: fully functional, Thread cutting capacity in ST 60 M 22 Thread cutting capacity in cast iron M 27 8 speeds 180 - 1120 rpm Console version with height-adjustable head . with - or - without ROMAI multi-spindle Dsdpfsy Hf Akex Ac Nocg .

Condition: reconditioned (used), Year of construction: 2007, operating hours: 22,605 h, functionality: fully functional, pressing force: 100 t, filling opening width: 1,100 mm, filling opening length: 1,600 mm, bale width: 1,100 mm, bale height: 1,100 mm, bale weight: 1,400 kg, overall weight: 36,000 kg, oil tank capacity: 1,300 l, For sale is a overhauled baler, with 100 tonnes pressing force, large format 1100 x 1100 mm, 75 kW drive power and 10-fold cross binding Technical data baler: Manufacturer Bollegraaf Typ HBC 110 K / 75 kW Year of construction 2007 Press power main press 100 tons Press power of pre-press 50 tons Operating hours 22,605 hours Feed channel 1,600 x 1,100 mm Capacity per cycle time 3,15 m³ Theoretic cycle time 19 sec. Bale size 1,100 x 1,100 mm Driving motor 75 kW Connected load 126 kW Full load current 238 A Tying system 5-fold vertical, 5-fold horizontal, fully automated Throughput rate at a Dcodjvf E Avjpfx Ac Nog bulk weight of 30 kg/cbm approx.16 tons/h bulk weight of 50 kg/cbm approx. 25 tons/h bulk weight of 100 kg/cbm approx. 47 tons/h Bale weight up to 1400 kg, depends on material and bale lenght Volume oil tank approx. 1,300 l SPS controller Telemecanique TSX Micro Operating panel Schneider MAGELIS Touch Baler dimensions built up with hopper 11,750 x 5,000 x 7,105 mm (l x w x h) Transport dimensions only baler 11.750 x 2.500 x 3.450 mm (l x w x h) Machine weight baler approx. 36 tons Comments: The press was partially overhauled and serviced in our workshop and tested and stored after completion of the work. The machine is available at short notice and can be inspected in our warehouse by appointment. The following overhaul work was carried out: Rust removal and partial painting of the press. Remaining hydraulic oil tank drained, oil filter and air filter replaced. New hydraulic oil topped up. All hydraulic hoses replaced. Main hydraulic cylinder, two cylinders of the prepress flap and the cylinder of the press channel dismantled, disassembled, checked, cylinder tubes honed, all seal sets replaced and a final pressure test carried out. Disassembly of the prepress flap with bearings and bearing blocks. 1st and 3rd circular arc segmet cut out and a new one welded in again. Both bearings of the shaft of the prepress flap replaced. Upper material deflector on the frame of the prepress flap replaced. Press ram dismantled, checked and both front rollers replaced. Material deflectors and wear profiles on the sides and base of the press ram cut off and new ones welded in. Horizontal and vertical needle and tying unit dismantled, disassembled, checked, plastic sliding plates, bearings of the drill shafts and wire deflection rollers with bearings in the needle heads replaced. Both bronze slide rails on the left and right in the frame cover to the press ram replaced. Both wire deflection units on the left and right, with bale retaining clamps, completely renewed. Wire insertion unit including hydraulic cylinder under the needle feedthroughs completely renewed. Wire entry marks in the floor and side walls of the bale chamber welded shut and smoothed. General maintenance and service work carried out in accordance with the manufacturer's specifications. Press was tested in manual and automatic mode, accepted and stored after completion of overhaul work. We accept no liability for the technical specifications or any errors.

Condition: like new (used), Year of construction: 2012, functionality: fully functional, Clamping table, head adjustable by 400 mm, as new, high-performance thread cutting machine up to M10. Djdpfxoy Hdm Ue Ac Nscg

Condition: good (used), Year of construction: 2018, Load capacity: 3000 kg Height: 345 mm Width: 390 mm Depth: 120 mm Weight: 9 kg (without packaging) Dsdpfey Dct Uex Ac Nocg Condition: good, second-hand

Year of construction: 2015, condition: excellent (used), Direct gravure type A process of coating film or Aluminium with a coating agent or laminating it with another substrate. Line water.solvent based coater plus inline solvent based laminator Product width: Max 1,700mm Materials: 9~50um (PET), 10-60um(CPP), 10~70m (OPP), 20~ 100um (Aluminium) Speed: 300mpm (commercial 50-250 mpm) Dcedpowp Sausfx Ac Neg Volume:
 max 900mm Unwinding tension: 100-1,000N 
 Unwinding diametr: max 1,000mm (3in, 6in) Winding tension: 100-1000N Drying
temperature: Max 230°C (4m x 6 Zones)

Condition: good (used), Threading machine, bench drill, pillar drill Dcjdpfx Ajyvfzwjc Nsg -Manufacturer: Hagen & Göbel, HG 6 type tapping machine with solid base -Clamping table: 350 x 290 mm -Travel distance: 310 mm -Spindle mount: Ø 12 mm -Projection: 235 mm -Speeds: 710/1120/1800/2800 rpm -Column: Diameter 85 mm -Spindle stroke: 35 mm -Motor: 0.37 kW Accessories: incl. machine vice, see photos -Dimensions: 685/490/H1340 mm -Weight: 212 kg

Condition: good (used), functionality: fully functional, 13 pcs of 191 cm, 4 pcs of 200 cm, 41 pcs of 220 cm, 3 pcs of 227 cm, 52 pcs of 239 cm, 4 pcs of 244 cm. +/- trolley with 35 pcs new galvanized clamps Dsdpfx Aeynty Soc Nscg

Year of construction: 1968, condition: good (used), for aluminium strip width: max. 1.050 mm Dcjdpo A Dimjfx Ac Njg strip thickness: 10 - 20 mic

Condition: good (used), functionality: fully functional, Used slitter rewinder Goebel 2 shafts on unwinder max diameter on unwinder - 650 mm Dcsdpfjyqx Dnsx Ac Nsg max web widght - 2200 mm

Condition: used, Year of construction: 1989, A machine for applying glue to cardboard. Technical parameters: Djdpfx Aceua H Hms Njcg - working width: 170 mm - machine dimensions: 5800x2400x1800 mm - power supply: 400V Technical condition: used machine, to be reviewed

Condition: excellent (used), functionality: fully functional, coil weight: 8 kg, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, total width: 1,250 mm, Slitting line for sale Dcjdpfjv Twi Rox Ac Neg

Year of construction: 2016, condition: ready for operation (used), Grinding wheel diameter: 220mm, grinding wheel width: 5mm, base body width: 20mm, bore diameter: 52mm. Test piece: diameter: 100mm, width: 300mm, profile height: 35mm. Small workpiece: Outer diameter: 400mm, bore diameter: 205mm, wheel width: 100mm, torque: 20Nm, weight including mandrel: 200kg. Large workpieces: Outer diameter: 700mm, bore diameter: 350mm, disk width: 300mm, torque: 800Nm, weight: 250kg. Accuracy: Repeat accuracy: less than 2µm, axial and radial run-out accuracy (large spindle): less than 2µm at 400mm diameter, axial and radial run-out accuracy (small spindle): less than 2µm at 200mm diameter, parallelism over 300mm between test piece and workpiece axis: less than 2µm. Tool spindle speed: 10000rpm, small workpiece spindle: 23000rpm, large workpiece spindle: 6000rpm, test piece spindle: 1000rpm. Dodev T Aqgepfx Ac Nocg

Condition: used, Year of construction: 2005, Line Configuration 1. Unwinding Unit - Serame web unwinder 2. Corona Treatment System - Ferrarini & Benelli corona treatment unit; designed for double-sided treatment, currently only the top side is active 3. Web Suction System - Kelva web suction unit 4. Web Register Infeed Printing Units (Offset) 5. Printing Unit DW 1 – Offset 6. Printing Unit DW 2 – Offset - IST UV dryer 7. Web Turn Device - Web turner Possible Printing Configurations: 2 / 6-color printing Up to 8-color printing possible 8. Printing Unit DW 3 – Offset 9. Printing Unit DW 4 – Offset 10. Printing Unit DW 5 – Offset 11. Printing Unit DW 6 – Offset IST UV dryer 12. Printing Unit DW 7 – Offset 13. Printing Unit DW 8 – Offset UV drying Coating and Drying 14. Flexo Coating Unit IST UV and water-based coating 15. Drying Systems Adnos hot air dryer Djdpsyhayrofx Ac Njcg UV dryer available Inspection and Quality Control 16. BST Web Video Inspection System 17. BST 100% Inspection System – IPQ Check Rewinding 18. Rewinding Unit Serame web rewinder Additional Equipment: - Technotrans temperature control system - Web break sensors - Anti-static system - Central control console with: - Eltromat register control system - Operator monitors for machine control and visualization

Year of construction: 2006, condition: excellent (used), Oil burner Weishaupt oil burner GL7/1-D Year :2006 Мы говорим по русски! Viewing please only after telephone agreement! Preferred sale to dealers, traders or export. All information without guarantee, errors and prior sale reserved. The seller assumes no liability for typing and data transmission errors. Gladly we take your used boiler or burner in purchase! Of course we also take care of all formalities Loading possible Dcodpfxei Atc Hj Ac Njg

Condition: used, • L = 1550 mm Dsdjxp Ax Sspfx Ac Nscg • W = 1000 mm • Glass support 800 mm • 14 units available