Overbelt Magnet

Goudsmit SZEB160004

Condition: new, Year of construction: 2026, Make: S&F GmbH Type: MFB-500/5 Belt width: 500 mm Centre distance (A-A): 5,000 mm Conveying capacity: approx. 30 - 40 m³/h (at 0 ° incline) Drive: worm gear motor Motor power: 1.5 kW, 400 V, 50 Hz Belt speed: approx. 1.1 m/s Nsdow Ad Rrepfx Ah Sodc Drive drum: Drum diameter 220 mm Tensioning drum: Drum diameter 220 mm with spindle tensioning station Belt: EP 250/2 2:1 rubber inclined conveyor belt with V-profile (15 mm) Machine weight: approx. 450 kg Machine colour: RAL 6009 Fir green Suitable for the following bulk materials, among others: Wood chips, sawdust and sawdust, biomass, wood pellets, charcoal, waste wood, bark, soil, humus, recycling material, cross-cuts and much more. Accessories (optional): Feed hopper (filling hopper), inner belt scraper, chassis, tow bar, steel support, electrical installation (16 A plug-in switch) Troughed conveyor belt | troughed belt conveyor | conveyor belt | bulk material conveyor | belt conveyor | inclined conveyor belt

Condition: used, functionality: fully functional, power: 130 kW (176.75 HP), empty load weight: 14,000 kg, BHS - DKX 4.0 Single Shaft Mixer in very good condition, suitable for concrete, roller-compacted concrete, cement-bound road base, sludge, etc. Thanks to the bottom discharge flaps, even challenging, cohesive, or coarse materials can be mixed effectively. Motor power: 130 kW, empty weight: 14 tons, output: approx. 400 tons/hour. PLC and new electrical cabinet also available. Price on request. Haendle Box Feeder BKS 1506 with steel plate belt conveyor, large extensions (25 cbm), and two separately driven ripping shafts for challenging materials. Suitable for clay, loam, cohesive materials, substrates, humus, waste, etc. Two units available, new control system on request. Price on request. Njdoxxtk Djpfx Ah Sjdc

Condition: good (used), functionality: fully functional, “Steinert NES 125 220 E 5009” for Sale Njdpfx Ahoxb S Exs Sodc Manufacturer: Steinert Type: NES 125 220 E 5009 Belt widthness: 1.250 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: refurbished (used), Year of construction: 2001, Balz Debarking Machine BG 90 6W-GR Year of manufacture: 2001 Completely overhauled in 2022 and not reassembled afterwards Nodpfxjy Iabde Ah Sedc Minimum diameter: 14 cm Maximum diameter: 90 cm With conveyor systems for infeed and outfeed Immediately available – Fully overhauled Location: Austria, near Linz

Condition: good (used), functionality: fully functional, overall weight: 4,250 kg, “Steinert UME 110 120 P” for Sale Manufacturer: Steinert Type: UME 110 120 P 6,3 kW / 66,9 A. / 94 V. 100% ED Magnet L x W: 1.206 x 1.150mm Ndsdju S R Ekjpfx Ah Ssc Conveyor Belt: 1.200mm (new) AA.: Ca. 2.100mm Weight: 4,25 Tons With new transformer rectifier of 380V. Primary.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order. Nsdpfjua Tbwox Ah Sodc

Condition: good (used), “Rentec Dinosaurus 2600S” for Sale Ndsdpsvt Tptsfx Ah Sec Manufacturer: Rentec Type: Dinosaurus 2600 S Included Hydraulic-unit and control-unit build in container. With overhauled rotors. Also outlet conveyor in stock which fits to the Rentec Dinosaurs 2600S. See PDF-file below for more detailed information.

Condition: new, Year of construction: 2026, functionality: fully functional, Shafts for Shredders: Arjes, Terex, Eggersmann, Olnova, Pronar, Komplet, Doppstadt Arjes Impaktor 250/350, Arjes Compactor 300, Terex TDS 815, Terex Caiman 150, Terex Greentec LS2, Komplet Krokodile, Olnova model 5, Doppstadt Core Shredd 250, Eggersmann Impaktor 250 - Standard shafts - Special shafts - Customer-designed shafts - Spare parts Ndjdpsychwzofx Ah Soc - Knives Concrete / Paddle / Star / Metal / Electro and many more!

Year of construction: 2021, operating hours: 1 h, condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,500 kg, total length: 3,340 mm, total width: 2,360 mm, total height: 2,925 mm, input voltage: 400 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: The ASCO SD Compact is a semi-mobile screening machine for efficient processing of soil, gravel, wood chips, waste, and recycling materials. It delivers high-precision separation, flexible operation, and reliable performance for construction sites, recycling plants, and material processing facilities. Ndjdow Ryl Hepfx Ah Ssc Key Features: • Modular design with interchangeable drums & quick-change system • Adjustable screen inclination & variable drum speed (5–20 rpm) • Up to four fractions per drum segment with cleaning brush system • Optional bunker expansion for +50% input capacity • Compact, semi-mobile design with easy transport & setup Tech Highlights: Drum Ø 1.3 m · L 2.1 m · Mesh Ø6–Ø100 mm · Qmax 20–50 t/h · n 5–20 rpm · P 5.5–7.5 kW · Weight 1500 kg · Screening surface 7 m²

Condition: used, Mobile chamber filter press plant, dewatering plant, sludge plant, second-hand Application: chamber filter press, mobile dewatering, transitional dewatering, Design: mobile 1200/103-30 REWA/R&B Machine no.: 17100-44 Filter plate format: 1200x1200 mm Number of plates: 103 Filter plates: PP Cake thickness: 30 mm Filter cloths: optionally available to match the medium Filter area: approx. 230 m² Nedpfernnt Iex Ah Sodc Press capacity: approx. 3550 dm3 Filter pressure: approx. 15 bar Plate transport: automatic Pump technology: optional Control cabinet: yes Discharge: by means of discharge screw Mounted: on semi-trailer Purchase or hire: Inspection of the systems by arrangement at our factory.