Twin-shaft shredder

Hammel Arjes, Hammel, Linder

Condition: used, mileage: 266,694 km, power: 120 kW (163.15 HP), first registration: 12/2018, fuel type: diesel, overall weight: 2,800 kg, next inspection (TÜV): 01/2025, color: white, gearing type: mechanical, emission class: euro6, number of seats: 3, loading space length: 2,700 mm, Year of construction: 2018, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), navigation system, soot filter, Special Equipment: - Exterior mirrors, electrically adjustable and heated, both sides - Roof control unit with reading lamp, driver/passenger side - Automatic headlight activation - Rear door/tailgate windows with wiper/washer system - Fixed window in loading/cargo compartment, front right - Urea tank (AdBlue): 25 L - Fuel tank: enlarged - LED cargo area lighting - Full partition wall with sliding window - Partition wall with window in cargo area - Tire pressure monitoring system - Spare wheel holder under rear frame incl. jack - Seats in cab: passenger seat as double bench - Seats in cab: heated driver’s seat - Seats in cab: comfort driver’s seat - Seats in cab: driver’s seat with lumbar support - Mirror package - Dark tinted rear windows / privacy glass - Standard interior lining in loading/cargo compartment - Heat-insulating glazing - Two-way speakers in front Additional Equipment: - Third brake light - Adaptive brake light - Passenger airbag - Driver airbag - Hill-start assist - Aspherical exterior mirrors, both sides - Outside temperature display - Roof rail mounting tracks - BlueEfficiency package - Floor covering: passenger compartment TPO - Brake assist - Brake system with ABS and ASR - Driver assistance system: Attention Assist (drowsiness detection) - Driver assistance system: Crosswind Assist - Windscreen with integrated antenna - Alternator 150 A - Cup holder rear - Cup holder front - Seatbelt tensioner - Passenger’s grab handle - Lockable glove compartment - Body type: van - Body type: long version - Load securing/tie-down points - Multi-function steering wheel incl. trip computer - Engine 2.1 L – 120 kW CDI CAT - Rear fog lamp - Wheelbase 3,200 mm - Interior rear-view mirror - Low-emission according to Euro 6 standard - Sliding door, right side (loading/passenger compartment) - Seatbelt system with warning indicator (driver/passenger side) - Seat upholstery: fabric - Steel wheels 6.5x16 - Pillar trim panels - Interior lining in loading/cargo compartment: semi-high hardboard - Load securing rails on cargo area sidewall at roof frame - Service interval display Assyst Errors and prior sale excepted. Giedsvh Dpgepfx Aadjn Viewing by appointment only. No responses to WhatsApp inquiries.

Year of construction: 2025, condition: new, machine/vehicle number: 020, Star screen for biogas plants for processing a wide variety of materials such as maize, sugar beet etc.. The screen deck is used for sugar beet after the crusher to separate oversized particles. Or before shredding to sort out foreign bodies and to protect the shredding machine, e.g. with maize. We offer different lengths, shaft numbers and grain sizes. This depends on the material and the throughput rate. Gsdpfjbytafjx Aadoin Delivery times approx. 20 weeks

Year of construction: 2026, condition: new, SPINNER 1500s Application: Packaging, grouping and protection of long or bulky products like furniture, doors, timber boards, etc. operator side: Gedpfxofuwmuo Aadsin - in throughput direction right General machine features: - Main motor power: 2,2 kW - Max. ring rotation speed: 50 rpm - Min. ring rotation speed: 10 rpm - Electronic control components: Siemens , Schneider, LS - Total weight: 1200 kg Standard Equipments; - Driven conveyors belt (infeed and outfeed) for automatic product feeding - Adjustable ring rotation speed - Adjustable stretchfilm tension with mechanical brake device - Automatic stretchfilm clamp and cutter system - Pneumatic front and back top presses to hold the product while wrapping - Photocell to start automatically the wrapping cycle - Touch screen to adjust machine parameters to the product needs - Operator safety systems - Infeed and outfeed rollers Technical features: Product to Wrap Sizes according to technical drawings / Diagram - Max. length: Unlimited - Min. length (w x h x l): 100x18x550 mm Conveyor belt’s features: - Useful length: 1924mm - Total length: 2000mm - Working height: 900mm - Electric motor power: 0,75 kW - Max. speed: 10 m/sec. - Max. Load Capacity. 150kg/m Stretchfilm features: - Max. width: 250mm - Max. diameter: 230mm - Reel core diameter: 76mm - Recommended thickness: 23, 30, 35 micron

Year of construction: 2025, condition: new, New FERBERG mobile loading ramp from the manufacturer The FERBERG mobile ramp from the manufacturer is used in warehouses for loading and unloading containers and vehicles using forklifts, carts, etc. The loading dock ramp is a bridge between ground level and freight transport. Provides direct access for the loader to the vehicle body. Warranty 18 months. Having a CE Standard. Delivery throughout the country. Flexible system of discounts. Specifications: - Load capacity of mobile ramp – 8000, 12000, 16000 kg; - Total length – 9400, 11900, 13400 mm; - Carriageway width – 2000, 2500 mm; - Working height – 900-1750 mm; - Carriageway surface – zinc-coated anti-skid grating; - Height adjustment – using a hydraulic pump; - A special tow pole is used to move the truck loading ramp; - Color – grey. Complete set: - Mobile ramp – 1 pс; - Hand pump (made in Italy) – 1 pc; - Tow pole for transporting the ramp with a forklift – 1 pc; - Solid wheels – 2 pсs; - Rubber wheel chocks – 2 pсs; - Chains with carbine hooks – 2 pcs. Additional options: SL – Safety legs adjustable in height HR – Protective removable handrails TC – Tent cover CLR – Another color Gsdpfx Aeqxrhcoadein EHP – Electric (220V) hydraulic power station with a control panel EHBP – Electric (12V) hydraulic station with a battery pack Find out more on our website. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Condition: used, Manufacturer: SatrindTech Srl Type: F 810 Mach.No.: 65489 Shredding Chamber size : 850 x 590mm. Distance between shaft centres: 215mm. Gisdpfjwvk A Uox Aadon With 15 kW Electrical motor. Crushers will be overhauled, sandblasted and painted.

Condition: new, Year of construction: 2026, functionality: fully functional, We offer a storage tank for 5000 litre heating oil or diesel. Giodpei Ar D Sjfx Aadon

Condition: like new (used), Completely made of special stainless steel Speeds: 2 of the working worm and 2 of the feeding worm Hole plate diameter: 114 mm Hopper capacity: 100 liters Throughput depending on material type, speed, and cutting set: up to 1500 kg/h Machine width: 90.0 cm Machine depth: 84.0 cm Machine height: 116.0 cm Power of motor: 11.0 kW, 21 A Voltage: 400 V, 50 Hz Machine weight: 450 kg Giedswd N Nvepfx Aaden

Condition: new, empty load weight: 17,250 kg, maximum load weight: 48,700 kg, overall weight: 66,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,480 mm, loading space height: 375 mm, tire size: 245/70 R 17.5, color: grey, operation weight: 17,250 kg, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and removed hydraulically -For tractor units: 6 x 4 and 8 x 4 (or 6 x 4 with optional 1-axle dolly) Low bed: -Low bed with external supports, designed as a telescopic tank bridge in low construction with extension at the front -Length x width approx. 7,550 mm x 2,740 mm -Mechanical locking of the extension Chassis: -Chassis at the rear with closed outer frame -Checker plate covering and continuous prism excavator trough approx. 1,450/900 x 505 mm, open at the rear Axles, suspension and tires: -"PENDEL-AXLE", all axles hydromechanically forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with shut-off valves and pins for securing in raised position -Final painting of axles with 2 layers of 2-component paint in a single color in "FAY-Gray-34-0260" -Technical axle load 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 Accessories: -Steel bulkhead, plug-in, approx. 400 mm high -4 wheel chocks -Gooseneck in the rear upper area closed with a removable cover -1 pair of steel ramps with climbing strips and fastening bolts to bridge the hooks of the low bed -The ramps can be placed over or between the hooks -Fastening options for the steel ramps at the rear between the outer supports of the gooseneck -One Locking point approximately every 1,000 mm on the extension -1 lashing ring on the left and right on the front cross member -Connection strip for supply lines to the tractor unit, attached at the height of the outer frame profile -6 pairs of threaded blocks on the outside of the inner supports of the loading area for mounting screwable rings M24 -6 pairs of countersunk lashing rings on the outside of the outer supports of the loading area, foldable inwards and outwards -1 pair of threaded blocks at the front and rear of the outer supports of the loading area for mounting screwable rings M24 -Hanging strip for loose aluminum loading ramps on the vehicle's end cross member -Central lubrication system with 2 pumps, BEKAMAX brand -Steering from the front and rear, operated by cable remote control, with alignment control of the axles -3 kW electro-hydraulic unit for controlling the hydraulic processes, with the exception of hydraulic cable winches -Removable loading floor (galvanized) in 3 elements can be inserted between the outer supports with hardwood flooring -Foldable extensions, by approx. 230 mm per side -Extension planks, loose, framed in steel -4 warning signs approx. 423 x 423 mm -Radio remote control for operating the steering -3.5" king pin -Anti-slip sticker on the left bevel of the gooseneck -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw couplings -Guide plate from the gooseneck for the fifth wheel plate, approx. 800 mm wide -1 spare wheel with mounting adapter -Parking position on the gooseneck for the warning signs when not in use -2 pairs of stake pockets embedded in the outer frame of the chassis, for plug-in stakes approx. 100 x 50 mm -Dipper handle recess of the rear chassis closed at the back with a plug-in plate -Color of the trailer MB 7350 Novagrau Gsdsh Hm Tzepfx Aadein

Condition: used, Year of construction: 1991, total length: 1,520 mm, total width: 720 mm, power: 30 kW (40.79 HP), Fully overhauled, lubricated, and ready for operation. Automatic two-shaft hydraulic shredder designed for crushing and disentangling metal chips, plastics, wood, electrical cables, and other materials. It is controlled by a PLC that monitors sensors, manages shaft rotation, and automatically activates the reverse function, if several blockages occur within a short period, the shredder shuts down. In addition, the unit automatically switches off after a set period when operating without load. Technical Highlights: Power 30 kW Max hydraulic pressure: 250 bar Giodpfxjwk Egwo Aadjn Torque: 11,780 Nm 2 crushing shafts with blades Hydraulic drive with gear transmission (Valmet BB 3150CC) Automatic blade pressure adjustment (disc spring system)

Condition: new, empty load weight: 17,500 kg, maximum load weight: 43,500 kg, overall weight: 61,000 kg, axle configuration: 3 axles, loading space length: 7,550 mm, loading space width: 2,750 mm, loading space height: 400 mm, tire size: 245/70 R 17.5, color: grey, Equipment: ABS, Gooseneck: -Gooseneck in SNT design to optimize the loading area length, length approx. 3,750 mm -Gooseneck can be raised/lowered and lowered hydraulically -For tractor units: 6x4 or 8x4 Drop deck: -Low bed with external beams in extendable design, "SUPER LOW" design, length approx. 7,550 mm -Low bed with solid hardwood floor approx. 40 mm thick and mechanical locking mechanism The supply lines are protected in the pull-out supports and automatically adjust to the respective drop-down bed length Rear chassis: -Rear chassis with closed outer frame, checker plate covering and continuous Prisma excavator trough approx. 1,450/900 x 505 mm, open at the rear -2 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame Axles and tires: -"PENDEL-AXLE", all axles with hydromechanical forced steering -Hose rupture valve on the axle compensation cylinder with automatic RESET function -Hydraulic cylinder with stopcocks and locking pin for securing in raised position -Technical axle load: 12,000 kg -Hydraulic axle compensation -245/70 R 17.5 / 3PMSF tires Accessories included: -Preparation for mounting bolt-on container positioners for 1x 20ft or 1x 40ft container on the outer beams -2" kingpin -One galvanized steel end wall approx. 400 mm high -One spare wheel with holder -Yellow-red air couplings on the galvanized connection strip at the front -4 wheel chocks -Steering can be operated from the front and rear by remote control cable via pushbuttons, with axle tracking control -Hydraulic connections from the gooseneck to the low bed with multi-coupling instead of screw coupling -Electric hydraulic unit -White reflector tape in accordance with EU regulations on the side, on the extension and red at the rear -2 wooden blocks 500x250x200 mm -European reflector plates (red/yellow) at the rear of the trailer -On the gooseneck and on the rear plate on the left and right, one holder each for the warning signs including socket -Central lubrication system with 2 BEKAMAX (Pico) pumps with NLGI-2 standard grease -Load manometer for determining the axle loads including load diagram -ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,000 x 400 mm -The rear galvanized stanchions are removable (length of the body approx. 2,120 mm) -Separate air connection with air gun on the gooseneck -Duomatic air coupling from gooseneck to low bed -Gooseneck closed in the rear upper area with a removable cover -1 pair of steel ramps for bridging the mounting hooks of the low bed -Four warning panels approx. 423 x 423 mm, extendable by approx. 400 mm -Radio remote control for steering in addition to the cable remote control, with indicator lights on the receiver for tracking control 6 pairs of threaded blocks between the lashing rings under the top chord on the outer beam for mounting screw-on RUD rings VLBG-4 -7 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Gsdpfxjh Hm Ths Aadjin -folding extensions, approx. 230 mm on each side -A layer of sand painted onto the loading surface to prevent slipping Dipper arm recess of the rear chassis closed at the front and rear with a plug-in plate -HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot-blasted, then the defined visible surfaces hot-finished with ZINACOR 850 metallization (zinc 85% - aluminium 15%)