Generators

HBM 55021HBM

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 143 kg, fuel type: diesel, tank capacity: 12 l, color: black, output current: 12 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 6.8 kW (9.25 HP), continuous power: 6.2 kW (8.43 HP), total length: 730 mm, total width: 500 mm, total height: 620 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with 6,8kW. Three-phase generator Proton 3 with very low combustion. An added convenience is remote control with remote control. In short, a reliable engine, copper alternator and plugs. Model, with us since the beginning of the company. Generator perfect for construction sites. ABBREVIATION: Genset type: Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 400V Rated power: 400V - 6200 watts (7.7kVA) Maximum power up to 15 minutes - 6800W (8.5kVA) WEIGHT: Gross weight: 143kg FUELING: Knsdpfx Ahotrmc Rs Uef 1.0 liters per hour (at 70% of maximum power) 1.2 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 188FA-D Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 456 cc3 (88x75) Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.6l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 180-CAVR-400 Rated current (400V) - 12.3 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 84dB (measurement - 5m, open space) Fuel tank capacity - 12 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 3 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 50 cm Length - 73 cm Height - 62 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric, Manual (from a cord) Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Year of construction: 2025, condition: new, Mobile loading ramps AUSBAU from the manufacturer Standard models with 6, 8, 10 and 12 tons load capacity. We offer loading ramps from the manufacturer in any dimensions you need. They save the loading / unloading time of the truck / wagon. You can move them over the enterprise territory with the help of installed automotive wheels. Mobile loading yard ramps AUSBAU operate in any weather conditions. Warranty: 18 months. World-wide delivery. Finished and made-to-order. CE Standard. Read more about loading ramps on our website. id: ISGhNU Technical characteristics: ● Load of ramp, kg - 6000 / 8000 / 10000 / 12000 ● Total length of the ramp, mm - 9000 / 9500 / 10500 / 11200 / 12000 / 13000 ● The total width of the ramp, mm - 2130 ● Width of riding surface, mm - 2000 ● Length of sloping part, mm - 8000 / 8500 / 9200 / 9900 ● Loading stage length, mm - 300 ● Min. working height, mm - 900 ● Max. working height, mm - 1550 / 1750 ● Height of the hand railings, mm - 180 ● Number of entry bridges, pcs - 2 ● Number of wheels, pcs - 2 ● Wheels - solid ● Material - S235 ● Riding surface - zinc-coated anti-skid grating ● Components - rubber wheel chocks – 2 pcs, tow pole – 1 pc, set of chains on the ramp – 7 pcs, manual hydraulic pump with handle – 1 pc. Additional options: Kodpfx Ahsiqk E Ts Usnf ● electric hydraulic station on the ramp; ● three-sided unloading mobile ramp. Supplied with safety legs; ● safety legs adjustable in height, installed on ramp; ● tent cover over the ramp; ● additional protective hand railings, 1100 mm height; ● additional pair of wheels: 4 instead of 2; ● choosing a different color (standard color is red). Mobile ramp operating principle: The forklift lifts the edge of the ramp (inserting the fork into the rigid tow pole) and drives it to the truck. Using a hydraulic pump, set the required height of the ramp (from 900 mm to 1750 mm). Ramp complete with wheel chocks and chains. Chocks fix the ramp. Chains securely fasten the mobile loading ramp to the truck. Then the loaded forklift moves up the loading dock ramp and drives directly into the truck or container. The photos shown are for illustrative purposes only. For detailed sales information, please contact the manufacturer.

Year of construction: 2006, condition: good (used), Power generator, emergency power generator, generator, power generator, power generator, emergency power generator -Electric start -Power: 3.8 kVA 50 Hz -petrol engine -only: 95 operating hours -2x Schuko: 230 Volt, 1 socket slightly damaged -Dimensions of unit: 580/530/H615 mm -Weight: 79 kg Kjdpfsflmm Sjx Ah Usnf

Condition: used, power: 59 kW (80.22 HP), Equipment: all wheel drive, All vehicles we offer are in stock at our premises and can be inspected at any time. All images are original photos of the respective vehicle. The tractor starts immediately. Engine and transmission run perfectly. Approx. 13,000 operating hours Compressed air system (not connected) Front PTO Front hydraulics Fendt industrial front loader New air-suspended seat Battery master switch Second lift cylinder for rear linkage Work lights front & rear two double-acting hydraulic control units (rear) Drawbar hitch Front tires: 340/85 R24 Rear tires: 16.9 R34 Sale on behalf of customer Attractive financing and leasing offers available, also with no down payment. Our sales advisor will be happy to assist you. ---- Trade-ins accepted at fair conditions at any time. ---- Take advantage of our comprehensive service packages, such as warranty extensions or pick-up from the nearest railway station (additional charges apply; further details on our website). ---- Opening hours: Mon-Tue and Thu-Fri: 09:00 to 18:00, Wednesday: 09:00 to 16:00, Saturday: 09:00 to 13:00 (On Saturdays, please make an appointment to avoid long waiting times) ---- Ksdpfxsw Sqz Ie Ah Ujnf The information provided here serves solely for better identification of the vehicle and does not constitute a binding description or guarantee of the equipment. We accept no liability for typing or transmission errors. All details in the advertisements are non-binding and without guarantee and must be checked by the buyer upon acceptance. Subject to prior sale.

Condition: used, Landonio TMU 1200 Lathe Knodpfx Aoizxvkjh Uof

Condition: new, Ramp 10T premium, internal usable width 2m TM-GROUP, the best choice on the market. ⭐️ Galvanized ramp grating! ⭐️ ✅ Specification: - Manufacturer: TM-GROUP - Maximum lifting capacity: 10 tons - Internal width of the ramp: 2000cm - ELECTRIC and manual control of the ramp height 1m - 1.6m Knodpfjwa Smpjx Ah Ujf - galvanized ramp grating - Reinforced ramp barriers on both sides - Solid rubber transport wheels - Central ramp handle allowing the ramp to be moved with a forklift - Adjustment of the angle of inclination and height of the flap - Double-sided, reinforced ramp supports - Moving elements of the ramp equipped with lubricators - The ramp is also equipped with a reel ✅ Ramp grating: - Galvanized grating with anti-slip grooves. Safe and secure ground. Forklift and pedestrian traffic are guaranteed the best possible traction and solid support. The competition mainly offers ramps in which the approach is made of sheet metal covered with mesh. Our product has the aforementioned grid with grooves - a much more durable solution, thanks to which dirt from under the forklift wheels does not remain on the ramp, and the truck itself does not slip. ✅ Forklift handle - can be installed on both sides: - Convenient and quick attachment for the forklift allows the ramp to be transported in all directions. A specially designed handle allows the ramp to be maneuvered even in limited space. ✅ Chain for connecting to a TIR, wagon or permanent warehouse ramp: - A solid steel chain is another advantage of our ramp, additionally, the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side barriers: - Safety barrier with the possibility of unscrewing and installing a frame/roof (roof is optional). ✅ Electric control of the ramp height: - Smooth electro-hydraulic drive uses a high-class pump. The pump requires 230V, so it can be operated from a regular socket. ✅ Double-sided hand pump: - Hydraulic pump for height adjustment in the absence of the possibility of connecting to the electro-hydraulic power supply - double-sided lifting. This is an excellent solution ensuring work in all conditions. ⭐️ We offer the following variants: ⭐️ - Driveway width in the ranges of 1700 cm, 2000 cm and 2500 cm Standard, Premium and Premium plus. - Mobile ramps with a load capacity of 10 tons, 15 tons and 20 tons and 25 tons. - Thickness of driveway grids 3 - 5 cm. - Colors: red, blue, black and green (it is possible to produce a ramp in any color - individual order) - Mobile ramp with tarpaulin. As a manufacturer, we can produce ramps for special, individual orders - with different dimensions, load capacities or variants. Do you need an individual solution that you cannot find by browsing all the ads? Ask our specialist. Tags: Loading ramp, unloading ramp, loading ramp, mobile ramp, loading dock, loading dock, mobile loading ramp, mobile loading ramp.

Condition: used, Drill bits, twist drills, drill bits Kjdpfxorqinqo Ah Usnf -Manufacturer: Maysso / Ilix, twist drill 4 pieces Ø 24 - 26.5 mm -Type: double cutter, MK3 mounts -Size: 1x Ø 24/25.5/26/26.5 mm each -Price/tax: complete -on request: different sizes/quantities available from additional stock -Transport dimensions: 290/100/H30 mm -Weight: 2.5 kg

Condition: used, Year of construction: 2007, operating hours: 4,500 h, Equipment: all wheel drive, * Sale only for export/trade * electrical issues Knjdswwzx Aspfx Ah Uof Errors and prior sale excepted Inspection only by appointment WhatsApp inquiries will not be answered

Condition: good (used), Year of construction: 1988, Description: Heavy-duty, high-precision horizontal lathe with Rohm hydraulic clamping system, slide with two working positions, Sauter 4-position tool turret, circular turning unit, CNC 6 axes, tailstock, chip conveyor. Suitable for both high-volume material removal and high-precision turning. Machine modified with a 2000 mm face clamping plate and increased in size. Year of production: 1988 Made in: Germany Turning diameter over bed: 2500 mm Turning diameter over telescopic covers: 2200 mm Turning diameter over slide: 1400 mm Turning length: 6000 mm Three-jaw chuck table: 2000 mm Spindle bore: 200 mm Attachment for circular turning Workpiece weight: 4,500–40,000 kg Turret head: 4 positions Spindle speed range: 4 – 400 rpm Main motor Siemens 95.5 kW Maximum torque: 40,000 Nm Overall power requirement: 125 kW Control: CNC SIEMENS 8T, 6 controlled axes Machine weight: 43,000 kg Kedexmb Adepfx Ah Uonf Required space: 13,000 x 4,000 mm

Condition: used, Year of construction: 2025, color: grey-black, empty load weight: 4 kg, fuel type: gasoline, gearing type: mechanical, TITLE: NEW ROLL-OFF FLATBED CONTAINER WITH TWO SIDE DROP SIDES PER SIDE IN TR5 AND REAR SIDE WITH DOUBLE-ACTION DOOR AND TIPPER FUNCTION, FLOOR SUPPORTED BY 200 MM BEAMS, NR. 2 FRONT HYDRAULIC LOCKING CYLINDERS WITH USED PM CRANE WITHOUT RADIO REMOTE CONTROL REF: 25-N-44 TYPE: Flatbed with sides in TR5 C NEW: yes LID: no OPENING: rear and side 2+2 OVERALL DIMENSIONS TOTAL EXTERNAL LENGTH: 4.20 m EXTERNAL WIDTH OF BODY: 2.55 m FRONT DROP SIDE: 1.60 m + 0.10 m horns REAR DROP SIDE: 0.80 m SIDE DROP SIDE: 0.80 m CUBIC CAPACITY: 6 WEIGHT: 2510 kg FLOOR: 5 mm WALL: in TR5 COLOUR: grey CRANE DATA BRAND: PM SERIES 6 SERIAL NUMBER: GA322129 YEAR: 2007 NR.: 1 Subject to errors and/or omissions The prices shown do not include VAT. Please contact the sales department for updated prices and terms. For more information: Loris: 3484773001 URL: #thespecialistsinroll-offbodies AURORA ROLL-OFF SYSTEMS Knsdpjv Aqbxsfx Ah Ujf operates in the sale and purchase of industrial and commercial vehicles, mainly specialized in the waste sector. Specialised in trucks, trailers and roll-off equipment. With a large stock ready for delivery: over 50 trucks and over 150 containers, with or without roll-off cranes. E.&O.E. Given the large number of listings and details included, Aurora invites you to verify the accuracy of the data with the sales staff.