Tools

HBM Krimpzange Akku

Condition: new, Year of construction: 2025, operating hours: 24 h, functionality: fully functional, DOLFİN-PYM2 series parts washing machines are industrial purposed parts cleaning devices that are used before and after revision, particularly in repair and maintenance services. While the parts that are placed in the device are rotated on their own axis by means of the washing basket, pressurized detergent hot water is sprayed. With the pressure, temperature and chemical effect, all oil and contamination on the part is cleaned. Nwodjv Sa I Topfx Aazel Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labour. It works automatically in accordance with the temperature and time values that are set during operation. In order to load, particularly the heavy items into the washing basket or to remove them from the basket, the washing basket can be taken on a carrier trolley, in other words, from the device when required. It can be transferred to any point of the workshop with this trolley.

Condition: new, Year of construction: 2025, functionality: fully functional, Cabinet Sandblasting Machine CORMAK 1200L is a premium industrial-grade surface treatment device designed for high-efficiency abrasive blasting operations. Its double-sided construction with two independent working stations allows two operators to work simultaneously, significantly increasing productivity and reducing downtime. The cabinet is designed for intensive use in workshops, regeneration facilities, shipyards, automotive, aerospace, and heavy industries. Main advantages of the machine Large 1200-liter working chamber – enables sandblasting of large metal components and structural elements. Double-sided operation – two pairs of gloves, two blasting guns, two control systems, and two cyclone extraction units allow two operators to work at the same time. Dust-free operation thanks to efficient extraction systems and sealed perimeter gaskets. Durable steel construction – designed for demanding industrial environments. Compatibility with various abrasives: corundum, glass beads, electrocorundum, crushed shells, and technical sand. 15 replaceable protective visor films – ensure long-lasting visibility during operation. Intuitive operation – foot pedals, ergonomically positioned connections, and pressure control systems. Construction and technology The CORMAK 1200L model is manufactured from high-quality steel and protected against corrosion. Two working stations located on opposite sides of the cabinet allow simultaneous blasting from both sides of the workpiece. Each station is equipped with an independent blasting gun, pressure regulator, foot pedal control, and cyclone dust extraction system. This solution ensures high productivity while maintaining safety standards and operator comfort. The spacious interior and wide access openings allow easy handling of large components. Nwsdpfxov Aad Ao Aazjl Precision and work efficiency The operating pressure range of 4–8 bar allows adjustment of blasting parameters according to the type of material and abrasive used. The dual nozzle system and independent workstations guarantee high productivity without compromising precision. Closed-loop operation combined with an efficient dust extraction system provides the operator with excellent visibility and a clean working environment. Applications The CORMAK 1200L cabinet sandblasting machine is a versatile industrial solution suitable for many applications, including: Sandblasting of wheels, frames, suspension components, and body parts. Metal blasting in manufacturing and repair facilities. Surface preparation before powder coating, galvanizing, or welding. Cleaning, smoothing, and restoration of industrial, wooden, and plastic components. Professional abrasive blasting applications requiring fast, precise, and clean surface treatment. Standard equipment 8 ceramic blasting nozzles 15 replaceable protective visor films 2 industrial blasting guns 2 pairs of protective gloves integrated into the cabinet 2 cyclone dust extraction systems 2 pressure regulators 2 foot control systems Technical specifications – CORMAK 1200L cabinet sandblasting machine Parameter Specification Internal cabinet dimensions 1150 x 1260 x 800 mm External dimensions 1800 x 1400 x 1880 mm Operating pressure 4–8 bar Capacity 1200 L Abrasive materials Corundum, glass abrasive, sand Weight 196 kg Note: The machine is supplied in a self-assembly version.

Condition: new, Year of construction: 2026, Cabinet Sandblasting Machine KDP350TOP PLUS is an advanced technological device designed for precise abrasive blasting operations. Its construction has been developed for demanding users in the industrial, automotive, metalworking, and restoration sectors. Thanks to the top-opening chamber and side openings for long components, this model enables efficient cleaning and surface finishing of profiles, frames, and parts with unusual dimensions. It is an ideal sandblasting cabinet for wheels, metal components, and machine parts. Main advantages of the machine Large 330-liter working chamber – allows processing of medium and large components. Top-opening chamber – simplifies loading of elements with non-standard shapes or lengths. Side openings – provide convenient access and comfortable operation with longer parts. Dust-free operation system with two dust extraction connections and sealed gaskets. DC15 cyclone dust extractor included – effectively removes contaminants from the working chamber. Efficient operating pressure range of 4–8 bar and air consumption of 400–700 l/min – ensure effective blasting performance. Blasting gun with ceramic nozzles – high wear resistance and compatibility with various abrasive materials. Construction and technology Nwsdom Ncciopfx Aazol The KDP350TOP PLUS cabinet sandblasting machine features a robust construction made of thick steel sheet, powder-coated for increased corrosion resistance. The upper door is equipped with telescopic cylinders, making it easier to open even when handling heavier components. The tightness of the cabinet is ensured by rubber perimeter seals, preventing dust and abrasive material from escaping outside the working area. The bottom abrasive discharge system allows quick and convenient replacement of blasting media. Precision and work efficiency Thanks to the wide operating pressure range and the ability to use various abrasive materials, the CORMAK KDP350TOP PLUS sandblasting cabinet provides uniform and precise cleaning of metal surfaces. The large viewing area of 580 × 270 mm and integrated workspace lighting enable accurate control of the blasting process, even when working with complex-shaped components. It is an excellent solution for workshops requiring repeatable and professional surface treatment results. Standard equipment DC15 cyclone dust extraction system Foot pedal for airflow control Working area lighting – 12V fluorescent lamp with 230V power supply 2 integrated, wear-resistant rubber working gloves 2 dust extraction connections: Ø63 mm and Ø90 mm Sandblasting gun with 8 replaceable ceramic nozzles 4 protective visor films Front door with rubber seals User manual in Polish Technical specifications – KDP350TOP PLUS cabinet sandblasting machine Parameter Specification Working capacity 330 L (0.33 m³) Operating pressure 4–8 bar Air consumption 400–700 l/min Air connection 1/4" quick connector Viewing window area 580 × 270 mm Side opening dimensions 200 × 180 mm Dust extraction connections Ø63 mm and Ø90 mm Internal cabinet dimensions (W × D × H min/max) 890 × 655 × 360/610 mm External dimensions 960 × 720 × 1500 mm Weight 88 kg

Condition: new, Year of construction: 2025, total height: 4,000 mm, total length: 7,000 mm, total width: 3,000 mm, warranty duration: 24 months, temperature: 80 °C, air demand: 36,000 m³/h, input voltage: 380 V, heating capacity: 345 kW (469.07 HP), power: 40 kW (54.38 HP), fuel: liquid petroleum gas (LPG), energy consumption: 40 kWh, insulation material: Mineralwolle, insulation thickness: 50 mm, nominal power: 345 kW (469.07 HP), Equipment: lighting, MAIN STANDARD Our paint booths are designed to meet all necessary requirements for paint application, including air filtration, extraction, lighting, and a controlled environment. Booth processes are managed via a PLC system, ensuring that desired values are maintained consistently. OPERATING PRINCIPLES OF THE BOOTH The booth’s processes are managed through a control panel, which oversees the following steps: PAINTING PROCESS During painting, 100% fresh air is drawn in from outside and passed through front filters before entering the distribution chamber at ambient temperature. The air is then expelled through the extraction unit. Floor filters (paint stop filters) collect paint particles, and the air passes through final exhaust filters before being discharged. FLASH-OFF PROCESS After painting, the booth continues operating for approximately 15 minutes to purge residual solvents and thinners. During this phase, fresh air circulates from outside into the booth. DRYING PROCESS In this stage, 80% of the air passing through the booth is heated to 60°C and introduced via a distribution system. Since 20% of the solvent is released during drying, it is expelled with the exhaust air. Industrial coatings are typically dried at 60°C, but the booth temperature can be adjusted as needed via the control panel. COOLING PROCESS After the 30-minute drying cycle, the coil is deactivated via the control panel, the pneumatic damper closes, and the extraction system restarts. During the subsequent 5-minute cooling phase, fresh air from outside circulates through the booth, after which the system shuts down automatically. ELECTRICAL AND ELECTRONIC EQUIPMENT These control panels govern the functions and operation of machines and devices housed within the booth. The panel is made of durable galvanized sheet and steel profiles and is fully enclosed to protect against dust and moisture. Nwedpfx Aaewzmcbozjl Electrical Equipment and Control Panel: • The control panel contains essential components such as circuit breakers, fuses, indicator lamps, thermal relays, contactors, and connectors. • Heat-resistant cables are used for command and control connections between the control panel and motors or other electrical devices. • Electrical wiring is designed to accommodate booth relocation if needed. • Operating equipment uses 380 V 50 Hz, while control devices operate at 220 V. • The booth’s operation time can be monitored on the electronic control panel, enabling straightforward maintenance scheduling. • Temperature and time settings for booth ventilation (solvent flash-off), intermediate drying, and final drying can be easily adjusted to required values on the digital display of the electronic control panel. • Users can monitor and adjust the drying time using the heating thermostat and time relay.

Condition: as good as new (ex-display), 1 3/4 inches – 5 1 3/8 inches – 5 1 1/8 inches – 7 Nodpfx Aedwbk Rsazswl 7/8 inches – 9 5/8 inches – 11 1/2 inch – 13 3/8 inch – 16 5/16 inch – 18 1/4 inch – 20 Individual acceptance testing is possible.

Condition: used, mileage: 198,000 km, power: 62 kW (84.30 HP), first registration: 12/2010, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI is a versatile used vehicle configured as a panel van. Specifically designed for commercial use or export, the Transporter offers numerous attractive features. With an output of 62 kW (84 hp), it is equipped with an efficient 2.0-liter diesel engine and complies with the Euro 5 emissions standard. The Transporter was first registered in December 2010 and has a mileage of 198,000 km. It features a manual 5-speed gearbox and is registered as a truck (LKW). The exterior of the T5 is defined by its Ginstergelb (R1032) paintwork and includes five doors with two side sliding doors, positioned on both the left and right. The interior is designed for maximum functionality, offering three seats and a robust wooden floor in the load compartment. The vehicle has a permissible gross weight of 2,800 kg, providing versatile loading and conversion flexibility for various transport requirements. Safety and environmental sustainability are ensured by its green emissions sticker. The T5 has a combined fuel consumption of 7.2 l/100 km and CO2 emissions of 190 g/km. With its main inspection valid until February 2025, the vehicle remains ready for long-term use. Viewings are possible during business hours without prior appointment. Nwjdpfxsyntime Aazel Sale only to trade customers (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to prior sale and errors excepted.

Condition: new, Year of construction: 2021, functionality: fully functional, cooling capacity: 44.9 kW (61.05 HP), type of input current: three-phase, type of cooling: air, overall weight: 610 kg, input voltage: 400 V, total width: 1,200 mm, total length: 1,900 mm, total height: 2,000 mm, warranty duration: 12 months, heating capacity: 53.1 kW (72.20 HP), Aircooled chiller/Heat pump Climaveneta NX N G06 LN K 0202P 44.9 kW/53.1 kW Cooling capacity: 44.9 kW / 12.77 tons (12/7 — 35°C) Heating capacity: 53.1 kW / 15.1 tons (40/45 —7°C) Year of manufacture: 2021 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 2 pcs. Bitzer GSU60120VLB4-2 (scroll) Nsdpev Tnh Dsfx Aazjwl Type of refrigerant: R454B Number of fans: 4 pcs. Dimensions: 1.9x1.2x2 m. Weight: 610 kg. Working hours: 0/0 h. Condition: New CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 2,250 mm, total width: 840 mm, total height: 1,350 mm, * Year of manufacture 2025 (new unit) Nodpox Tzpmefx Aazjwl * Kohler KDI 2504 TM engine * Mecc alternator * Sockets: 1 x 32A, 1 x 16A * 1 x Schuko * Forklift pockets Power 41 kVA Length 2250 mm Width 840 mm Height 1350 mm Weight 1070 kg

Condition: new, Bernardo Belt Sander KBR 100 x 2000 Duo Nedpfxod Id Ubs Aazswl Belt dimensions 100 x 2000 mm Belt speed 15 / 30 m/s Min./max. pipe diameter 20 – 76 mm Sled adjustment 30° – 90° Flat grinding table 400 x 100 mm Contact wheel Ø x W 195 x 100 mm Dust extraction connection Ø 2 x 100 mm Speed 1410 / 2850 rpm Motor output S1 100% 2.2 / 2.8 kW (400 V) Motor input S6 40% 3.0 / 4.0 kW (400 V) Machine dimensions (W x D x H) 750 x 1450 x 1160 mm Weight approx. 158 kg Features Consistent belt tension thanks to spring-loaded tensioning device Standard with round grinding attachment for pipes with diameter 20 – 76 mm Quick and easy adjustment of the desired grinding angle Graphite coating on the flat grinding surface increases the sliding properties of the grinding belt Large-sized flat grinding surface with protective cover Slow belt speed (15 m/s) is ideal for grinding stainless steel and aluminum User-friendly belt change, quick and easy Quick and easy changing of the grinding rollers without tools Various grinding angles from 30° to 90° can be easily achieved Shorter processing times compared to milling Scope of delivery Grinding belt K 36 Rubberized grinding roller 1 piece grinding roller for 3/4“ pipe (26/28 mm pipe) 2 pieces folding protective screens Round grinding attachment Grinding and support table 2 x dust extraction nozzles, diameter 100 mm 2 pieces chip collection containers Graphite coating Motor protection switch

Condition: new, range L-W-H 1066 x 460 x 940 mm weight 80 kg 12 St. Nodpfoupxu Asx Aazswl Mobile tool trolley, scope of delivery: Top drawer dimensions 954 x 400 x 134 mm Dimensions of the left drawers 569 x 400 x 75 mm | 569x400x154mm Dimensions of the right drawers 296 x 400 x 75 mm | 296x400x233mm Diameter rolls 12.5 cm Width of rolls 3.2 cm Maximum loadable weight of the large drawer is 35 kg Maximum loadable weight of the narrow drawer is 20 kg Maximum loadable weight of the tool trolley is 350 kg