Year of construction: 2003, Condition: good (used), Bolt gun, bolt setting tool Liaif -Hilti DX 460 nail gun -Magazine: MX 72 -Suitcase -Quantity: 1x shooting devices available -Price per piece -Weight: 6 kg/piece

Condition: used, machine/vehicle number: 149774, for screws: M 8 - M 16 max. tightening torque: 140 Nm Tool holder, square: 1/2" 2Pba3Y electrical connection: 220 V, 280 W weight: 3,3 kg

Condition: excellent (used), Thyristor controller with field regulator (28211) Make Unitek type 82 Classic Q. 3 400/450-60 UE 400 UA 450 ld 60 A Ia 120 A Weight 11 kg Dyuye3 Width 290 mm Depth 230 mm Height 225 mm

Condition: good (used), Incl. blue table Ionpzrb2U

Condition: new, Inverter system HEIDENHAIN UVR 120D Ce38X3Z0P2

Condition: like new (used), Large lot of Atlas Copco torque screwdrivers with accessories All built between 2017 and 2020 (most from 2019) Scope of delivery: 7 pieces Atlas Copco PF6000 control units 8436 1800 02 (up to 6 tools per control) 9 pieces Atlas Copco ETV STB 63-100-13W 30V angle screwdriver 1 piece Atlas Copco ETV STB 63-150-13W 30V angle screwdriver 4 pieces Atlas Copco ETV STB 63-40-10W 30V angle screwdriver 4 pieces Atlas Copco ETV STB 33-30-10W 18V angle screwdriver 2 pieces Atlas Copco ETP STB 33-12-10W 18V screw gun 12 pieces Atlas Copco batteries 30V 4.2Ah 6 pieces Atlas Copco batteries 30V 2.6Ah 8 pieces Atlas Copco batteries 18V 4.2Ah 2 pieces Atlas Copco chargers A485 18V to 36V A few socket wrench inserts As good as new. Barely used Fully functional See pictures New price complete approx: 120,000 euros gross Viewing and collection possible Shipping Germany (excluding islands) 139.00 euros net Shipping by freight forwarder Dqwlxn The goods can be viewed at the 59379 Selm location by appointment. You will receive an invoice with VAT shown. Payment information: Payment by bank transfer before delivery of the goods. Or cash on collection.

Condition: good (used), two-arm drill, rotary drill, magnetic drill, impact drill, two-hand drill, core drill -Manufacturer: AEG, two-hand drill type BZ 22 -Nominal power consumption: 660 W -Connection: 220 volts -Speed: 230 - 350 rpm -Dimensions: 550/370/H110 mm Zkqbp99Sw -Weight: 7.6 kg

Year of construction: 1970, Condition: used, machine/vehicle number: 3566, Melting chamber dimensions Length: 240 mm width: 200 mm Depth: 40 mm Solder capacity: 16 kg Power input: 2400 W for mains voltage: 220 V Ivk0Emd38

Year of construction: 2014, operating hours: 13 h, Condition: good (used), machine/vehicle number: 6159326770, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II H2 Year of manufacture: 03/2014 Item no.: 6159326770 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: -ECS -ECPL Dq07D7 - ECD5 - MC35-10 - ECA15 Number of screwing cycles saved in the control: 15 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: reconditioned (used), power: 1.51 kW (2.05 HP), Machine completely overhauled. Stable spacer for use when repairing pallets. Zcie7Ftg There are 50 used machines available.

Year of construction: 2006, Condition: used, machine/vehicle number: RA Lack, 8 Ex agitators 400V 16A 0.55Kw Bhceb0Ps HEW Herford Used condition from stock Article location 75053 Gondelsheim

Condition: used, Functionality: fully functional, machine/vehicle number: 29.572, A TMR agitator - type LME (FM 4.0 / 4) is for sale. The assembly on the tank or mixing container is done using a mounting flange. Bn2Itfk3Ifw All parts that come into contact with the product are made of stainless steel. The speed of the motor and shaft is 1430 rpm (no gearbox available) The device can be inspected at the production site in Thuringia by arrangement. Bolt circle flange: 4/270mm Shaft length: 168cm Agitator blade diameter: 18cm

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator, reel -Manufacturer: Wampfler, spring balancer type 040821-03X2.5 -Load capacity: 2.0 - 3.0 kg -Cable extension: 2.5 m -Dimensions: 240/130/60 mm Xam3Zfjxc -Own weight: 0.8 kg

Condition: used, machine/vehicle number: 050189, for groove width: 13 - 30 mm Hdal8Sybg for groove depth: 22 - 35 mm Milling cutter speed approx.: 1200 rpm drive motor: alternating current 220 V, 1020 W Weight: approx. 6 kg

Year of construction: 2016, operating hours: 10 h, Condition: good (used), machine/vehicle number: 6159326780, We are dissolving part of our demonstration tool inventory: Desoutter control CVIC II L4 Year of manufacture: 09/2016 7Jqk0Yigo Item no.: 6159326780 little used, fully functional without any additional accessories Suitable for the following Desoutter screwdrivers and screw spindles: - ECA (7 to 200 Nm) - ECD (7 to 120 Nm) - ECP (7 to 40 Nm) - ECFS (7 to 30 Nm) - ECP HT (30 to 4000 Nm) - MC (5 to 135 Nm) Number of screwing cycles saved in the control: 1 Number of possible phases in the screwing cycle: 15 IO totalizer (999 IO results) Depending on the configuration, viewing result memory is 5000 to 20000 I/O interfaces: 24 volt inputs and outputs: 8/8 Serial RS232 interface Ethernet interface

Condition: ready for operation (used), 11x DRK 26 H from Erwin Stelzer Warburg agitators with emergency stop switch. 8x with propeller, 3x without propeller. Product data: 1 Kw 220/380V 5.9/3.4 AMP. N99Ul 920 U.p.m. 2,7 HP 0,64 cos Insulation class E Shaft length 400mm Shaft diameter 30mm Total length 800mm blade diameter 240mm Connection: DN125

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator -Manufacturer: Tecna, spring balancer type 9190 -Load capacity: 0.4 - 1 kg -Rope length: 1600 mm Dqyznv -Number: 1x spring balancer available -Dimensions: 180/110/H55 mm -Own weight: 0.6 kg

Year of construction: 2011, Condition: used, machine/vehicle number: 6151656900, Used Desoutter ERS12 electric screwdriver with integrated sensor with connection cable fully functional without any additional accessories Item.No.: 6151656900 suitable for Desoutter CVIR II - screw control Output: Hex 1/4F" Torque: Min.: 1.5 Nm 7Kc83H0Mw Max.: 12 Nm Idle speed: 950 rpm Weight: 0.7kg

Condition: good (used), For sale are four propeller agitators DRK64D from Erwin Stelzer Warburg. One propeller blade is slightly bent. Bksbcafh9G Product data: 11kW 380/660V 25.0/14.5A 1450rpm Shaft length 600mm blade diameter 340mm DN250 0.85 cos IP44 50Hz

Condition: good (used), balancer, machine balancer, spring balancer, cable extension, weight compensator Cx2Y93Yk -Manufacturer: Fein, Balancer spring balancer -Load capacity: 1-3 kg -Number: 2x spring balancer available -Price: per piece -Dimensions: 260/200/135 mm -Dependent weight: 3 kg/piece

Year of construction: 2011, Condition: used, machine/vehicle number: 6151653640, Used Desoutter ERAL2-60 angle screwdriver, electric controlled including motor cable compatible with Desoutter CVI 2 - screwdriving Drive : 3/8" Torque: working Torque : 5.9 till 33.0 ft.lb max Torque : 44.0 ft.lb net weight : 3.7 lb. Enbifwr Length: 17.4 in.

Condition: used, For sale is an agitator motor from YTRON. It is the model AF 132M/4C-11. 82J2A9 RpM: 1450 V: 480 kW: 9 Connection: DN150 For further data see type plate

Condition: ready for operation (used), For sale is the propeller agitator DRK8P6/12D from Erwin Stelzer Warburg. Product data: 18/4 kW 380V 34,2/10,8 A 980/480 rpm shaft length 780mm blade diameter 420mm 0,92/0,68 cos IP 44 50 Hz Type of operation S1 Insulation class E N99Yd Nameplate (photo)

Condition: good (used), For sale is a directional jet agitator from Stelzer Rührwerke International GmbH. It is the model SM460-DF. Product data: 1455 R.p.m. 400V 18,5 kW Shaft length 720mm Blade diameter 280mm Bkr9Vju3Cq For further data see type plate (photo)

Condition: like new (used), For sale is the agitator motor FCA 90L - 6 from AC-Motoren GmbH. Product data: 910 - 1092 RpM 240 - 480 V 1,1 - 1,32 kW B7Wh8Evq 450mm shaft length 240mm flange diameter