Flatbed die cutter

Heidelberg Dymatrix 106 CSB pro

Condition: good (used), Year of construction: 2015, functionality: fully functional, punching force: 330 t, Machine for punching, embossing, waste removal, and separating waste sheets - as is - System equipped with a high-performance sheet feeder for automatic NON-STOP operation ⦁ For fully automatic punching, scoring, and embossing with or without gripper edges ⦁ For removing the inner waste as well as the side and rear sheet edges ⦁ For stacking the punched and removed sheets with the attached gripper edges, or ⦁ For separating the gripper edges and subsequently stacking the remaining sheets ⦁ With a patented gripper carriage register system for maximum registration accuracy ⦁ With a package stacking machine that enables fully automatic feeder operation and NON-STOP stacking, and does not need to be reconfigured even for the smallest cut sizes. (Rotary table with comb structure) ⦁ Separator magazine with electric stock control, can be refilled during production ⦁ With centerline equipment ⦁ With automatic pallet changing device in the stacker Specification Sheet format max. 760 x 1060 mm Sheet format min. 350 x 400 mm Maximum punching force 3.3 MN (330t) Speed 9,000 sheets/h Processable materials: Paper min. 80 g/m² Cardboard up to 2000 g/m² Corrugated board up to 3 mm (max. sheet curvature 4 %) Machine configuration Feeder • Fully automatic non-stop feeder with logistics for processing Euro pallets, system pallets and disposable pallets • Preset function for W4 feeder • Automatic format adjustment of the suction head • Automatic stack side limitation in the feeder System • Dyset Pro bar system Hodpfx Absz H Smwsusw • Lateral sheet alignment based on registration marks or sheet edge, max. ±10 mm • Optical side mark Punching station • Vacuum punching plate for the use of 1 mm punching plates • Pneumatic closing frame with quick-release function • Motorized punching plate fine adjustment via touchscreen, adjustment range ±1.5 mm • Motorized punching pressure adjustment Waste removal • Quick-release frame for fixed tools • Sheet guiding device • Integrated quick-release system with fine adjustment for accommodating waste removal frames with fixed tools Stacker • Quick-release frame for fixed tools • Brake brush stacker • Integrated quick-release system with fine adjustment for accommodating separating frames with fixed tools

Condition: used, Year of construction: 2006, working width: 520 mm, roll width: 520 mm, roll diameter: 1,000 mm, Equipment: documentation/manual, Video below We offer this used ETI Converting Equipment Cohesio ST 520 coater, die cutter, UV silicone coating, flexographic printing press 1 colour, , 11 magnetic cilinders, year of construction 2006. multifunctional equipment that allows self-adhesive materials and labels. linerless 1 flexo 2 hotmelt coating guns (roatating bar, lips + ‘Waterwall”) 3 unwinders Web width of 520 mm E + L webguides at the infeed and between hotmelt and UV printing unit 2 Corona treatments for two unwiders 2 cleaners UV Curing on 1 Flexo units (UV-Ray), which chilling rolls 2 die cutting units Chiller Working hours 9000 Year of production 2006 more information on request Hodpfx Absyalqysusw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: new, Year of construction: 2025, functionality: fully functional, total width: 6,400 mm, total length: 7,800 mm, total height: 2,500 mm, overall weight: 30,000 kg, New machine Machine for punching, embossing, waste stripping and depaneling Specification: Sheet format max. 830 x 1,150 mm Sheet size min. 450 x 550 mm Maximum punching force 3.0 MN (300t) Hjdpfx Ast H Nhhobuew Speed 7,000 Bg/h Processable materials: Paper min. 80 g/m² Cardboard up to 2,000 g/m² Corrugated cardboard up to 4 mm Features: manual non-stop feeder Automatic pile alignment at the feeder 10" inch display at the feeder Automatic non-stop roll cloth in the feeder stripping station Blank separating station Centerline Automatic separating sheet inserter to stabilize the panel stacks Quick-clamping frame stripper upper tool and central stripping board Quick-clamping frame blanking station upper and lower tool Pneumatic clamping frame and punching plate lock APC 1 - automatic punching pressure system APC 2 - platen tilting at the platen exit 1x 4mm cutting plate incl. 10x 1mm cutting plates 2x 5mm cutting plate 1x Quicklock clamping frame 2x clamping frame without Quicklock QTM fine adjustment of cutting plate Sheet monitoring in each station with 2 sensors Incl. platform 1 tool set (Bobst system) Delivery time: 6-8 months

Condition: ready for operation (used), Year of construction: 1989, Printing units outside/inside: 3/1, doctor blade units: available, envelope size range: booklet min./max.: 100mm/150mm–180mm/254mm, pocket min./max.: 89mm/120mm–187mm/305mm. Documentation available. An on-site inspection is possible. Hedpexbrxlsfx Abujw

Condition: used, Year of construction: 2011, machine/vehicle number: 1205, Perfect binding line Kolbus KM 412.B Year: 2011 Consisting of Book block feeder Meccanotecnica XMT Year: 2011 - Infeed conveyor from the right Gathering machine Kolbus ZU 841.B Year: 2011 Description: - Hand feeding station - Universal base: 18 - Number of gathering stations: 18 - ATC thickness control - Optical sheet control: SignalLynx Hjdpjt Rmhaofx Abusw Card gluer Kolbus KK 841 - Hotmelt glue unit: Nordson Problue - Air center: VariAir central system - Reject gate for incomplete products: AS 841 - Set up element - Intermediate element with vibrating - Transfer into the binder Perfect binder Kolbus KM 412.B Year: 2011 Description: - Number of clamps: 30 - Main milling station - 1st spine preparation station - 2nd spine preparation station - 3rd spine preparation station - Brushing station - Excluding dust extraction system, machine was connected to a centralised dust extraction system - Base for 1st spine glue system - Cold glue spine gluing, interchangeable - Intermediate drying station (infrared) - Base for 2nd spine glue system - Hotmelt spine glue unit, interchangeable - Premelter for spine glue unit: LH 375.C - PUR spine gluing unit, interchangeable - PUR premelter for PUR spine glue unit: Nordson XNO 962 - Base for side glue system - Hotmelt side glue unit, interchangeable - Premelter for side glue unit: LH 375.A - Gauzing station - Heating elements in curve: IR - Stream cover feeder: SAL 413.B - Scoring station: 6 - 1st nipping and pressing station - 2nd nipping and pressing station - Lay down device (to the left) Transport system Kolbus TSE Description: - Transport system, length (approx) - Escape delivery Conveyor tower Three knife trimmer Kolbus HD 153.P Year: 2011 Product counter: 148 mio Description: - Co-Pilot with touchscreen - Right hand infeed - Counter stacker - Knife pre-setting device - Sets of knives: 2 - Exchangeable cutting tables (standard set): 7-18 - Silicone spray device Book stacker Kolbus (RIMA) XRS 130 Year: 2011 Description: - Compensating stacker - Delivery to the left and right

Condition: like new (used), Year of construction: 2022, functionality: fully functional, overall weight: 4,000 kg, power: 17 kW (23.11 HP), total width: 1,510 mm, total length: 6,500 mm, total height: 1,820 mm, Automatic paper roll paper lid machine with inline packing machine for 8oz and 12oz cups Speed - 70~100 pc/minute Raw material - One-side or two side (polyethylene)film coated/laminated paper Hsdpfx Aoxur Hiobuow (Like the PE coated paper; PLA paper; card boad paper with film) Paper Lid Size - for 8oz and 12oz Working Power - 12kw Total Power - 17KW, Power Source - 3-phase, 380V, 50/60Hz, User Need To Buy Air Compressor

Year of construction: 2000, condition: good (used), BOBST SP 104 E Hodpfjyz Adnex Abusw Type: Autoplaten Die Cutter Year: 2000 Technical Specifications: Maximum sheet size: 740 x 1040 mm Minimum sheet size: 350 x 400 mm Maximum speed: 8,000 sheets/hour Maximum cutting force: 250 tons Operating hours: approx. 35,000 Configuration and Equipment: Manual non-stop feeder Synchronization device Pull side lay guide 2 cutting chases 1 cutting plate (4 mm) Centerline system Micrometric adjustment device (for 1 mm plates) C.U.B.E. system Stripping section 1 set of stripping frames (quick locking) including tools Non-stop delivery Condition: Machine is in good working condition Inspection under production possible upon request _____ Key Advantages: Reliable and proven BOBST technology High cutting force of 250 tons – suitable for a wide range of applications Equipped with stripping section and non-stop delivery for efficient production Centerline system for quick job changeovers Well-maintained machine with relatively low operating hours _____

Condition: excellent (used), Year of construction: 2007, Print counter (m): ca. 70 Power: max. 15.000 sheets/hour Format (mm): Max. Paper Size: 750 x 600 mm // Min. Paper Size: 280 x 200 mm Max. Printing Area: 745 x 545 mm Printing: 5/0 or switchable 2/3 Hjdpfoz N Egkex Abujw Paper Thickness: 0,04 – 0,6 mm Dampening preparation: Filmfeuchtwerk RYOBI matic New ink application rollers

Condition: used, Year of construction: 2006, Format: 375 x 520 mm Printing Area: 365 x 505 mm (14.37 x 19. Min. Size: 375 x 520 mm (14.76 x 20. Max. Size: 100 x 150 mm (3.94 x 5.91 Min. Paper Thickness: 0.04 to 0.6 mm (0.00 Max. Paper Thickness: 0.04 to 0.6 mm (0.00 Speed: Up to 15,000 sheets per Power: 16 kw Net Weight: Approx. 7,000 to 8,400 kg Measurements: L 4,545 mm W: 2,240 mm H Equipment: RYOBI PCS-H Printing control system RYOBI PDS-E Printing Density Control System High pile delivery RYOBI-matic continuous dampening system Technotrans cooling and circulation device Automatic ink rollers, blanket, impression washing Semi-RPC: Semiautomatic plate changer Powder spray device: Grafix Digital 3000 Double sheet detectors (mechanical/electronic) Hsdozwf Ulopfx Abuew Electronic missing sheet detector Suction tape feeder board Plate register remote control device (vertical, la Preset functionality Stream feeder Plate punch

Condition: used, Year of construction: 2003, Year of manufacture: 2003 Technical specifications: 2 colors + varnishing unit Max. sheet size: 740 × 1,040 mm 159 million impressions Rolandmatic Tresu varnishing unit CCI ink remote control IR/TL dryer Hsdjz Hnukspfx Abusw Grafix Cantronic powder sprayer PPL power plate loading Automatic plate changing All washing systems Currently in production and operational Availability: available in the short term Price: upon request Location: Germany