Plastcompactor system

HERBOLD HV 70/250

Condition: used, The machine is suitable for the agglomeration of thermoplastic films and fibres. The throughput can be estimated to be 500 kg - 1000 kg/h, depending on the material, its condition and humidity. The system consists of: • conveyor belt • load-dependent control for the belt conveyor. • metal detector Redpfxsu Ekfms Ah Ujck • HERBOLD granulator type SMS 45/100-H5-3 • pneumatic material transport to the storage silo • plastcompactor unit HV-70 (consisting of a storage silo feeding screw, plastcompactor, central blower, cooling circuit) • HERBOLD secondary granulator type SML 45/100-S4-2 • intensive cooling • SZS II 630/200 conveying fan • screening machine, undersize grain will be returned into the compactor silo. • material conveyor type MFT with big bag station and automatic switchover to the on-site silo • automatic exhaust air filter • electrical control unit • compressor.

Year of construction: 2006, operating hours: 15,000 h, condition: good (used), For sale is an Erema 1007T. Year of manufacture: 2006 Operating hours: 15,420 Throughput: 250-350 kg/h Currently, the system is used to process HDPE, but it is also suitable for other plastics such as LDPE. The system can be viewed during operation. A new extruder screw was installed in February. Rjdpsumubyefx Ah Ujck

Year of construction: 2015, condition: reconditioned (used), Technical data Feed hopper with hydraulic moving floor and bag opener: Manufacturer BRT HARTNER GmbH Type HP5-3035 Year of construction 2015 Hopper volume 30 m³ Drive line 17.5 kW Dimensions in current state 13,200 x 3,050 x 4,350 mm (l x w x h) Condition of the machine: The feed hopper with bag opener was in use at a large recycling company, where waste in bags was tipped into the hopper with wheel loaders and the bags were opened via the bag opener and the waste was conveyed in doses for further processing. The system worked perfectly until it was dismantled and was replaced by a larger system with a higher throughput capacity. The machine is in good working condition. On request, various spare parts can be purchased for a separate, additional fee. The buyer would have to dismantle the elevation for removal, as the machine is otherwise too high. Rcodpfx Aheu R Rtbj Uok Comments: The machine is currently being overhauled in our workshop. The photos show the machine in the current overhaul phase, so the system has not yet been fully reassembled. Once the overhaul work has been completed, probably in February 2025, the machine will be tested in operation without the use of materials. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 1991, VECOPLAN VAZ 120/105-U Waste Crusher For shredding particleboard and solid wood waste, drive power 18.5 kW, throughput 1000 kg/h for chipboard waste, 350 kg/h for solid wood waste, screen diameter 25 mm, rotor diameter 235 mm (circle), width 1070 mm, 120 rpm, feed unit : Sectional steel construction , driven by hydraulic cylinders, in plastic guide rails, laterally with rollers, main drive E-motor with turbo coupling, V-belt drive, 2-stage helical gearbox, motor rated power 18.5 kW, rated current 36.5 A, 1455 rpm, 400 V, 50 Hz, Degree of protection IP 54, Type B 3, V-belt pulley Turbo clutch D 1 = 200 mm, V-belt pulley Drive D 2 = 200 mm, Number of V-belts Z = 3 pieces, V-belt Effective length LW = 1900 mm, centre distance ENOM = 635.84 mm, Door length L = 635.84 mm, impression depth EA = 23.35 mm, test force per V-belt F = 75?, Turbo coupling: hydrodynamic coupling, load-free starting of the electric motor, overload protection, hydraulic ic unit: Compact unit with 2 operating speeds, drive power 1.0 / 1.4 kW, drive pressure max. up to 180 bar, Rjdpfst Dh T Dex Ah Ueck extraction nozzle: minimum air velocity V = 28 m/s, inlet length 1200 mm, inlet width 1050 mm, waste shredder with universal rotor- dimensions in mm: approx. 6500 x 2700 x 3600, weight in kg: approx. 2300, Machine quality: fully operational after maintenance. year of construction: 1991

Condition: as good as new (ex-display), Year of construction: 2022, operating hours: 500 h, machine/vehicle number: 22-014, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Rcjdsqabm Espfx Ah Uok Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: good (used), Year of construction: 1989, Shredder +press +conveyor belt+silo complete Rodpfx Asr Dvdkoh Ueck

Condition: new, - Engine power 7,5kW - cutting force 20to Cutting channel designed for - max. roll length 1100mm - max. roll diameter 900mm - machine weight approx. 2500kg - tank capacity approx.100Liter - hand guard in the area of the control panel and opposite to it -colouring of body RAL according to customer's request protective grid/knife bar RAL 1028 melon yellow Ordered goods Rcjdjftnt Njpfx Ah Ujk Price and further information on request

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Rotor width = working width 98 cm Rcedpfxjt Tvk Ae Ah Ujk 22 kw motor with discharge auger

Condition: like new (used), Year of construction: 2024, operating hours: 200 h, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, total length: 2,700 mm, I offer a new machine for large format thermoplastic solutions for 3D printing. Control: Stäubli / Cead - Profinet full controll Robot: Stäubli TX200L - reach 2700 mm, load capacity 100kg Rcodpfxsurvzrj Ah Uok Extruder: Cead E25 with a flow rate of 12kg/h Dryer VIZMATEC 100l plus automatic dosing for continuous production. G-CODE / NC code is used to generate the robot trajectory.

Condition: new, Year of construction: 2022, Shredder 630 motor: 18,5 kW; 400 V - 50 Hz - 3 ph knives: 30 pieces concave, multiple rotatable rotor diameter: 260 mm Rotor design: EcoRings Control system: PLC Siemens S7-1200 Rcsdpfx Ahoku Abis Ujk cutter opening 630 x 820 mm filling volume approx. 0,6 qbm screen perforation: 10 - 12 mm Suction nozzle Ø 160 mm