Husmann roll packer

Husmann GT 1750 E

Condition: not inspected (used), Year of construction: 1985, functionality: fully functional, pressing force: 50 t, bale length: 1,000 mm, bale width: 750 mm, bale height: 750,750,750 mm, bale weight: 500 kg, input voltage: 400 V, overall weight: 7,500 kg, oil tank capacity: 500 l, power: 30 kW (40.79 HP), empty load weight: 7,500 kg, input frequency: 50 Hz, Manufacturer: Paal Typ: Pacomat V Year of construction: 1985 Press power main press: 50 t Specific press capacity: 5 kg/cm² Feed channel: 1.000 x 720mm (l x w) Theoretic throughput rate: 200 cbm/h Bale size: 700 x 1.000 mm (w x h) length adjustable Driving motor: 30 kW Bale weight: approx. 500 kg Machine weight: approx. 8000kg Hfjdpfx Aqoic Rl Depjn The hydraulic unit is functional, the drive motor is in the removed state.

Year of construction: 2009, condition: like new (used), Press with container Engine 5,5 kW 400 V Hfsdpfx Aqsfhb Tiopsn

Condition: excellent (used), Year of construction: 2002, Marini-Ermont RB 160 Mobile Asphalt Mixing Plant Year of manufacture: 2002 Capacity: 160 t/h Type: batch Mix - Mixing unit as a semi-trailer - Drying drum as a semi-trailer - Feed hopper as a semi-trailer Hodpeym Drvofx Aqpsfn - External material silo - Loading silo approx. 25 m³

Condition: new, ∗JCB TM180 SV C New Vehicle∗ - JCB Diesel by Kohler [48KW/64HP] - Emission Stage V with DPF - Lifting Height: 4.53 m - Rated Payload: 1,800 kg - 2-stage hydrostatic drive – 20 km/h - Tyres: GOODYEAR POWERLOAD 365/70R18 - Comfort Cab (ROPS/FOPS) - Radio pre-installation - Adjustable steering wheel - Fully opening windows Hedoyfvmvspfx Aqpefn - Heating - SELF-LOCKING DIFFERENTIAL FRONT AND REAR Front axle = 45% Rear axle = 25% - Servo single-lever control - Euro quick coupler - Fork carriage with 1,200 mm pallet forks - LED work lights front/rear/boom - Yellow rotating beacon - Right & left armrest - Roof-mounted wiper - Extended seat backrest Immediately operational, numerous additional attachments in stock. An appointment for viewing is expressly requested. On request, we will gladly provide you with a leasing or financing offer from Mercedes-Benz Bank. Mr. Mihm (phone) will be happy to assist you. Further information available on our homepage. Subject to errors and prior sale! BSS, Quick-coupler, Road approval = Further Information = Please contact Tobias Ebert for more information.

Condition: repair required (used), Year of construction: 2003, operating hours: 12,500 h, functionality: not functional, Hammel VB 850 E stationary with magnet Hfjdpfx Aoyt Iaweqpon + 2 pairs of new shafts Machine is without gearbox.

Condition: new, Brugger HX14 shredder - compact, powerful and ready for use anywhere! The Brugger HX14 shredder combines maximum performance with impressive mobility. With its powerful 25 HP petrol engine and the ability to effortlessly shred branches and trunks up to 14 cm in diameter, it is the perfect choice for demanding gardening and landscaping projects. Thanks to its compact design and road approval, the HX14 can be transported quickly and easily anywhere - whether in the garden, on construction sites or to remote locations. Efficiency and flexibility in one device! Your advantages at a glance: • Powerful: 25 HP petrol engine for powerful shredding • Large capacity: Processes branches and trunks up to 14 cm in diameter • Compact design: For easy handling and space-saving transport • Mobile and flexible: Ready for use anywhere with a trailer and road approval • Ideal for professionals and demanding projects: Reliable and durable for daily use The Brugger HX14 - your powerful partner for maximum mobility and efficiency! Dqqhzd Technical data: • Dimensions - 274 x 125 x 175 cm (l x w x h) • Weight - 383 kg • Blade - 2.36 cm wide Hfedpfx Aqjvpfutjpjn • Max. diameter - 14 cm • Processing/h - 10-14 m³/h • Feed hopper on the drum - 36 x 14 cm Contact us for a tailor-made offer!

Condition: used, Dimensions: L 6990 mm, W 2500 mm, H 2720 mm. Weight 4191 kg. Tipping device for 140-660 l containers Hfsdsvkn Nvepfx Aqpjn

Condition: used, machine/vehicle number: 5063, Attachment: Used decanter/centrifuge Manufacturer: KHD Model: Full-casing screw centrifuge Type: CP 3-0.1 Machine no.: 5063 Maximum permissible speed: 2950 rpm Inner diameter of drum: approx. 530 mm Drum wall thickness: 12.5 mm Drum material: W 2 Hfsdsddzm Tepfx Aqpen Gearbox: internal hydraulic gearbox Hydraulic drive: Rotodiff and pump unit (Viscotherm, Pump Unit C11-25Z/HP) Total weight: 2400 kg Purchase and rental possible.

Condition: new, Year of construction: 2024, Gold River SWZ-700 water separators Application description: The GOLD RIVER SWZ series separator has been designed for special tasks, it can cope with the most difficult materials that contain many properties that disturb the separation process in separators commonly available on the market. SWZ water separators separate heavy fractions (non-ferrous metals) from, among others, plastics in the process of recycling secondary raw materials. SWZ separator equipped with a four-section copper water system equipped with radial nozzles with variable linear geometry. The separator uses the latest divided type of separation mat. The development of a modern module for preliminary division and preparation of material guarantees the purity of recovered raw materials in a very short time (plastics, metals). Why a water system? Our device uses a system similar to that used in the gold recovery industry. We use water as a carrier and a force that affects the materials in a gentle way. In the water system, all particles with higher mass are gently washed out and separated, generating no losses during the entire separation process. The properties of water together with our proprietary solutions are unrivaled compared to, for example, air separators. SWZ type separators are used: Separation of heavy from light materials (metal granulates contaminated with plastic, foil, paper, cotton, fibers) Cleaning plastics after air separators (dry) Separation of metals in cable and non-ferrous metal recycling lines The SWZ-700 water separator, thanks to the use of the latest module, performs the separation process in a very short time, therefore it is characterized by a high hourly efficiency of separated material of approximately 1200 kg/h. Hsdsua Tbwjpfx Aqpjfn Description of action: The material fed into the separator goes through the transport channel to the module for initial fraction division into its mass and humidity changes. Some of the material is separated at this stage. In the second part of the module, the humidity of the remaining batch changes. Then the material falls onto the separation table where the final fraction separation takes place. As a result of this process, we obtain valuable materials from both sides of the separator. Construction description: The massive structure and the inertial drive of the separator are made of materials appropriately selected to withstand the overloads resulting from vibrations. The supporting frame ensures excellent stiffness and failure-free operation for many years. Due to the type of vibration drive, the design does not require the installation of a soil separator. Separation table equipped with hydraulic adjustment of the angle of inclination. The separation table has a special module for initial division of fractions into their mass and preparation for final separation. The water system has several water pressure valves. The water circulation in the separator is closed. There is no need for constant access to an external water source because the device works using the water already in the tanks. Based on experience and continuous research in our laboratories. We are able to provide you with separators individually adapted to the specific nature of the material being separated. In various versions and sizes. SWZ-700 separators are manufactured to individual order.

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total width: 2,420 mm, total length: 6,840 mm, total height: 2,600 mm, overall weight: 15,000 kg, type of input current: three-phase, filling opening length: 2,000 mm, filling opening width: 1,980 mm, input voltage: 400 V, empty load weight: 4,950 kg, DGUV certified until: 08/2027, Presto HGS20R Container for roll-off tipper trucks 20 m³ usable volume Hsdpfxszt Nirj Aqpofn technically refurbished repainted in desired RAL color hook lift system on both sides discharge door hinged at the top