Diesel Forklift

Hyster H8.0FT-6

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM2000.5000 H-322.41.9000.3E 130.20, Load capacity 5t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min FEM group 2M Operating voltage 400V Ksdpfx Ahovx E I Se Ujnf Control voltage 230V Flange width 300mm Several immediately available in stock

Condition: new, functionality: fully functional, Year of construction: 2025, The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go. The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment. The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy. The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam. The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die. Kodorq D Nispfx Ah Usnf Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Condition: good (used), Year of construction: 1999, Indoor crane, crane, electric wire rope hoist, hand trolley, push trolley, crane trolley, trolley undercarriage, crane undercarriage, trolley, girder undercarriage, overhead track undercarriage -Manufacturer: Steel, crane chassis with electric rope hoist -Cable pull: Type AS 3016-16 2/1 -Load capacity: 3200 kg -Main stroke: 8 m/min -Fine stroke: 1.35 m/min -Traction drive: FA-C 3728 133-1 -Travel speed: 5/20 m/min Kedetlzdqopfx Ah Uonf -Roller spacing: 1400 mm, dimensions see photos -Drum speed: 16.0 / 4.0 m/min -Number: 2 crane trolleys available -Price: per piece -Transport dimensions: 1670/1200/H470 mm -Weight: 462 kg/piece

Condition: as good as new (ex-display), functionality: fully functional, number of ink cartridges: 5, color channels: 4, paper weight (min.): 60 g/m², paper weight (max.): 350 g/m², paper width (max.): 330 mm, paper height (min.): 152 mm, paper height (max.): 660 mm, number of feeding trays: 5, total length: 2,068 mm, total width: 803 mm, total height: 1,391 mm, counter reading (black): 15,765, counter reading (color): 45,673, input voltage: 220 V, Equipment: auto duplex, brochure finisher, documentation/manual, Xerox PrimeLink C9070 Digital Production Machine including BR Finisher. Knjdjx Hi Hyjpfx Ah Uof This machine is in excellent condition and has only produced 61,438 prints! Print speed - Up to 70 ppm (color) - Up to 75 ppm (black & white) (A4) - Resolution: 2400 × 2400 dpi (high quality) - Recommended monthly volume: 10,000 – 50,000 pages - Maximum duty cycle: up to 300,000 pages/month Looking for other options on the machine? We are flexible and can configure the machine to your requirements! This machine has been inspected and thoroughly tested by our own specialized technical team. If you require further information, please feel free to contact us. Worldwide shipping available.

Condition: good (used), machine/vehicle number: 3069, Year of construction: 2018, load capacity: 9,000 kg, lifting height: 5,600 mm, mast type: duplex, fork carriage width: 150 mm, fork length: 2,440 mm, total length: 4,270 mm, total width: 2,555 mm, operation weight: 13,430 kg, additional equipment features: Rear mud guards, Centralized greasing system, Front mud guards, Equipment: lighting, Hyster H9.00XM-6 from Uniktruck Kjdpoul Du Tefx Ah Uonf

Condition: used, functionality: fully functional, mileage: 1 km, first registration: 01/2017, fuel type: diesel, overall weight: 38,000 kg, tire size: 295/60 R 22,5, axle configuration: 4x2, fuel: diesel, color: blue, driver cabin: other, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: air conditioning, Vehicle number # 29459 Euro VI 4 x 2 Rear axle air suspension Tires 295/60 R 22.5 Allison automatic transmission Air conditioning Height-adjustable fifth wheel Tow coupling at the front Duomatic and standard Rear window Driver's suspension seat Knodpfovptcfex Ah Uof Radio/CD CB radio Heated mirrors Front sunblind Rear driver warning system Cummins engine 14,034 operating hours Leasing or financing available on request!!

Year of construction: 2023, condition: new, Standard version: - Y1, Y2, X, R (4-axis) X=650 mm X,R - Control system - CNC CYBELEC ModEva 19T - CNC controlled motorised crowning - European clamping system - throat - Sliding front support arms with T-slot and tilt stop - Rear stop: Siemens DC servo with linear guide & ball screw - Protective covers Special accessories: (Available depending on bending length and pressing force): Bending aid: - Bending aid -motor. Height adjustment - max. load 125 kg - Bending aid -motor. Height adjustment - max. load 250 kg Backgauge axes: - X=650 mm X,R,Z1,Z2 (AL) - X=650 mm X,R,Z1,Z2,Delta X +/- 125mm CNC controlled - X=650 X1,X2,R - X=650 X1,X2,R,Z1,Z2 - X=750 X1,X2,R1,R2,Z1,Z2 - X=1000 mm X,R (AL ) - X=1000 mm X,R,Z1,Z2 (AL) Control: - DELEM DA 69T - DELEM DA 66T Safety system: - CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) - CE with FIESSLER AKAS-3P motorised + FPSC (SAFETY PLC) - CE for tandem machines FIESSLER AKAS light barrier - tandem - - preparation + safety cover with switch - AKAS 3P tools: - Various tool clamping systems as well as tools to choose from. Further options: - DAM (Durma Laser Angle Measuring System) - Air conditioning for control cabinet - additional support arms movable Koden Tnn Espfx Ah Usnf - Central lubrication manual - Central lubrication motorised - Control panel on the other side - additional stop fingers - oil cooler - Parking area for bending aid (1 metre) - second foot pedal - die rail (groove 12.7 mm width, 15.8 mm height) - special painting - Tandem preparation - oil heating - laser bending line - lateral sliding doors Are you interested in exactly this machine model or do you have specific questions? Please use the contact field to send us a message. We will answer you immediately!

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, operating hours: 7,908 h, fuel type: diesel, motor manufacturer: MERCEDES, gearing type: converter, battery voltage: 28 V, tire condition: 70 %, color: yellow, Equipment: CE marking, air conditioning, all wheel drive, centralized greasing system, full service history, seat heater, 4x4 tractor Only 8,000 operating hours Registered as a working machine and homologated for snow plow and salt spreader attachments on public areas Knjdpfxjv H Urcj Ah Ujf Available: salt spreader trailer + 2 m³ salt spreader + ballast + homologated snow plow blade for road use – €5,000 + VAT Swivel seat with three positions Air conditioning External 24V electrical sockets front and rear for accessories

Condition: good (used), machine/vehicle number: 2116, Year of construction: 2022, load capacity: 16,000 kg, lifting height: 4,580 mm, mast type: duplex, fork carriage width: 200 mm, fork length: 2,440 mm, total length: 5,514 mm, total width: 2,540 mm, operation weight: 23,360 kg, additional equipment features: Front mud guards, Rear mud guards, Equipment: lighting, Hyster H16.00XD-12 from Uniktruck Kodpequwd Uefx Ah Usnf

Year of construction: 2025, condition: new, functionality: fully functional, machine/vehicle number: GM1000.3200 H-323.41.6000.6E 130.20, Load capacity 3.2t Reeving 4/1 Lifting height 9m Lifting speeds 8/1.3m/min Cab travel speeds 20/5m/min Kedjvx E Ixspfx Ah Ujnf FEM group 3M Operating voltage 400V Control voltage 230V Flange width 300mm Available immediately in stock