Press brake
Baykal BAYKAL CNC APHS HYBRID PRESS BRAKE

Name: Baykal BAYKAL CNC APHS HYBRID PRESS BRAKE
Brand: Baykal
Availability: InStock

Year of construction

2025

Condition

New

Location

Işıktepe OSB Turkey

Press brake Baykal BAYKAL CNC APHS HYBRID PRESS BRAKE

Baykal BAYKAL CNC APHS HYBRID PRESS BRAKE

Show map

Machine data

Machine type:: Press brake

Manufacturer:: Baykal

Model:: BAYKAL CNC APHS HYBRID PRESS BRAKE

Year of construction:: 2025

Condition:: new

Functionality:: fully functional

Price & Location

Location:: BAYKAL MAKINA Işıktepe Organize Sanayi Bölgesi, Turkuaz Cad. No:59 16140 Nilüfer, Bursa, 16140 Bursa, Türkiye

Call

Details about the offer

Listing ID:: A15130471

Update:: 10.04.2025

Description

The CNC BAYKAL Hybrid Press Brakes combines all the benefits of both hydraulic and all-electric press brake systems into one. If you’re looking for press brakes that are fast, accurate, and energy-efficient, BAYKAL is the way to go.

The CNC BAYKAL Hybrid Press Brakes can significantly save energy, save fuel, improve bending efficiency, reduce the risk of oil leakage, reduce installation costs, extend the service life of consumables, improve bending accuracy, reduce noise, and improve the working environment.

The CNC BAYKAL hybrid press brakes system are designed with an individual electro-hydraulic servo drive system and servo pumps to control the for each of the left and right cylinders. The servo motor controls the output flow of the oil pump according to the program setting, and then controls the movement speed and position positioning of the slider, and there is no throttling phenomenon in the whole process. Therefore, all the energy output by the oil pump is supplied to the left-right oil cylinder. This control method does not have any energy loss, and the energy-saving effect is very prominent. With this system the hydraulics run on demand when the foot pedal is activated, rather than having a pump running continuously. This results in lower energy usage than a standard hydraulic machine as well as faster cycle times and extremely high accuracy.

The flow and pressure of Y1 and Y2 oil cylinders are respectively controlled by two sets of servo bidirectional pump systems, and the oil in the upper chamber of the oil cylinder is directly pumped into the lower chamber of the oil cylinder through the oil pump to realize the lifting of the beam.

The reverse rotation of the oil pump pumps the oil in the lower chamber of the oil cylinder directly into the lower chamber of the oil cylinder to realize the pressing and bending of the upper die.

Bedpfx Asrq D Niod Aolr
Applicable between from 100 Tons to 1250 Tons, the synchronization of the left and right of the upper beam of the CNC BAYKAL hybrid press brakes is controlled separately by two sets of servo bidirectional pumps.

Documents

15130471-01.pdf

Seller

Registered since: 2024

10 listings online

Call

Send inquiry

Telephone & Fax

+90 530 8... show

These listings may also fit your interest.

Listing

Rödermark

1,021 km

Hydr. ring bending machine
PBTPBT

Call

Condition: good (used), Year of construction: 1995, machine/vehicle number: 9518 202-5, Offer 24361 Technical data: - 3 individually motor-driven rollers manual + controlled operation - Max. Torque per roll 1600 Nm - Stroke of bending roller X-axis approx. 265 mm - Lower rollers laterally adjustable 200 - 1000 mm - Shaft diameter 105 mm - Roll diameter up to approx. 260 mm - Effective length of standard shafts approx. 300 mm Bodpst Nfv Tofx Ad Ajlr - Shaft rotation infinitely variable 1 - 22 rpm - Bending capacity e.g. - Round tube 1" Ø 350 mm - Round tube 4" Ø 2000 mm - Flat bar 300 x 15 Ø 600 mm - Roller drive 400 V / 3 x 1.1 kW - Hydr. drive 400 V / 3 kW - Weight approx. 1200 kg - Weight of accessories approx. kg - Space requirement approx. W 1250 x H 1400 x D 1700 mm - with: - PC 100 control unit in separate control panel - Lateral straightening rollers horizontally + vertically adjustable - Standard bending set for flat and angled material - Steel + plastic tube roller sets

See details

Listing

Machining center Rumba Gemma Group Rumba

Bopfingen

1,188 km

Machining center Rumba
Gemma GroupRumba

Call

Year of construction: 2024, condition: new, Machining Center Rumba - Processing length 3,000 mm / 4,000 mm CNC-controlled machining center with vertical machining spindle suitable for machining extruded aluminum profiles, light metal, PVC and steel from 3 sides. Controlled tilting worktable: -90°/0°/+90° with intermediate angles. The machine is equipped with an electrospindle 4Kw, 18000 rpm, controlled by inverter and quick tool change (tool changer) with spindle ISO30. Interpolation X, Y, Z and W axes controlled by the numerical control. Brushless motors for X, Y, Z and W positioning. Complete with 4 pneumatic double clamps, tool diameter correction via software. Axis movements on linear guides. Left profile stop. 10.4-inch color monitor (touchscreen with simplified Windows-based graphics, TeamViewer for remote maintenance, special software HICAM 2 / CAMPROX for loading ISO files and running programs). Possibility to process longer parts. Standard equipment: 4kw electrospindle ISO30 4 pneumatic clamps (manually adjustable) safety guard automatic tool changer (10 tools) 4x ISO30 cone complete with tools 3x compartments for collecting chips air nozzle Technical specifications: X-axis travel 3,000 mm / 4,000 mm Y-axis travel 400 mm Z-axis travel 300 mm Rapid traverse (X,Y,Z): 50 m/1' Acceleration (X,Y,Z): 1.5m/s2 Electrospindle: 4Kw ISO30 / 6.6kw HSK63 (optional) Spindle cooling: air cooling Max tool length: 130mm Max. tool diameter: 140mm (saw blade) Working pressure: 7 bar Weight 2500kg It is always possible for you to inspect the desired system in our production/demonstration hall. Bjdpfehywz Sex Ad Aslr Please do not hesitate to contact us.

See details

Listing

Industrial robot KUKA Roboter KR16 / KR6 KRC2 ed5 KUKA Roboter KR16 / KR6 KRC2 ed5

Heiligenhaus

823 km

Industrial robot
KUKA Roboter KR16 / KR6 KRC2 ed5KUKA Roboter KR16 / KR6 KRC2 ed5

€4,000

Fixed price plus VAT

Call

Listing

Birmingham

339 km

Press brake
BystronicXpert 100 x 3100

Call

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, working width: 3,100 mm, pressing force: 100 t, working length: 3,100 mm, High quality, very clean used Bystronic 8axis cnc pressbrake for sale with hemming table BYSTRONIC XPERT100x3100 100 ton x 3100mm 8 Axis CNC Hydraulic Down stroke Press Brake Manufactured 2009 – fully serviced and well maintained Bjdpfx Adjtv Ixto Aelr High Specification: Year of Manufacture /new 2009 Model Xpert 100x3100 Hydraulic tool clamping Back gauge Programmable Guards Capacity 100 Ton Maximum length of bend 3100mm / 3metre Max stroke 215mm Rapid approach 180mm/s Tooling top and bottom Wander type footswitch Total 8 axis Y1,Y2,X1,X2,R1,R2,Z1,Z2 – 6axis back gauge With hemming table to Dutch fold / produce safety edges and flashings Crowning

See details

Listing

Jaworzno

1,625 km

CNC lathe
HAASST-25

€29,000

Fixed price plus VAT

Call

Condition: excellent (used), Year of construction: 2017, operating hours: 6,050 h, functionality: fully functional, travel distance X-axis: 213 mm, travel distance Y-axis: 572 mm, Haas turning center Type: ST 25 Bedpsrdg H Hofx Ad Aolr Year 2017 Hours of operation 6047h Maximum power rating, drive system 22.4 kW, belt drive Bar capacity, maximum speed 76.0 mm, 3400 r p m Axis movement range (X, Z) 213 mm, 572 mm Chip extraction Spindle clearance 75mm

See details

Listing

Großrudestedt

1,076 km

CNC press brake
YAWEIPBH160/3100-4C

Call

Year of construction: 2022, condition: new, immediately available CNC press brake YAWEI PBH160/3100-4C Blodpfx Aoiwfp Ted Aor - Pressing force: 1600KN - max. bending length: 3100mm - Year of construction 2022 - CNC controlled hydraulic crowning - Cybelec Modeva 19T controller - WILA upper tool clamp - 60mm table with 13.5mm x 22mm slot for insert dies - 2 front support arms sliding on linear guide - CE Fiessler Akas IIF light barrier - 24 months warranty - Commissioning, training

See details

Listing

Planer-Type Milling M/C - Double Column KRAFT/Skymaster VF1615A (Highspeed)

Stockstadt am Rhein

1,014 km

Planer-Type Milling M/C - Double Column
KRAFT/SkymasterVF1615A (Highspeed)

Call

Year of construction: 2018, condition: used, x-travel:1600 mm y-travel:1300 mm z-travel:700 mm distance between columns:1500 mm distance spindle center to table:225-925 mm table-size:1800 x 1300 mm table load:4000 kg T-slot (width-distance-quantity):22x 160 x 8 mm spindle taper:HSK-A 63 Bodpshx R Dvsfx Ad Aelr spindle speed:24000 U/min spindle drive:25/33 kW Spindle motor torque:72.6/95.8 N.m. rapid traverse in x-y-z axis:30000 mm/min Cutting feed rate X/Y/Z axis:1~20000 mm/min Tool changer:20 fach max. tool diameter:100/130 mm max. tool length:300 mm max. tool weight:8 kg total power requirement:80 kva Weight approx.:22 t Machine size (LxWxH):5660 x 5295 x 3930 mm CNC controller:Heidenhain TNC 620 spindle:IBAG electric spindle 24000rpm HSK-A63 Scales:Heidenhain automatic tool changer:20 fach chip conveyor - auger:2 Stk. Used portal milling machine with extensive accessories at a special introductory price. Important manufacturers of the components used in this storage machine are: Controllers and Servomotoren of Heidenhain, type TNC 620 Ball Screw Bearing - Japan Nsk X ball screw spindle Taiwan Hiwin Y Ball Bearing Taiwan Hiwin Z ball screw spindle Taiwan Hiwin 3 Axes Linear Guide - Japan Thk Or Germany Rexroth Electric screw unit - Hsk A63-24000rpm from IBAG Linear Encoder - Heidenhain Pneumatic System - Japan Smc Lubrication - Japan Showa Covers - Hema Air conditioning - Taiwan Kaokung Spindle water cooler - Taiwan point 3 axles Cable towing - Germany Igus Clutch - Germany KTR Company - Germany Mecano Relay - Omron Electricity - Germany Schneider MPG hand wheel - Japan Tosoku Further information on the machine, standard accessories and special accessories can be found in the appendix. Of course, we also gladly organize for you the delivery free house including assembly / commissioning and ready for handover as well as instruction

See details

Listing

Screw and barrel 150 mm - 30d REIFENHAUSER RH/RT 5801

Königswinter

884 km

Screw and barrel 150 mm - 30d
REIFENHAUSERRH/RT 5801

Call

Listing

Laser cutting machine Bodor P3015/4020/6020

Lübbecke

860 km

Laser cutting machine
BodorP3015/4020/6020

Call

Condition: new, Year of construction: 2025, Airtech Stickstoff has been representing the Bodor Laser company in Germany for several years. Our well-rehearsed team of service technicians assembles the machines and ensures training in German language. You are interested in our laser cutting machines ? Then we are waiting for your inquiry... Bledshk E Dvjpfx Ad Aer

See details

Listing

Welding Table 2400 x 1200 x 200mm GERD WOLFF 2400 x 1200 x 200mm

Ennepetal

847 km

Welding Table 2400 x 1200 x 200mm
GERD WOLFF2400 x 1200 x 200mm

Call

Condition: new, Year of construction: 2024, total height: 860 mm, total length: 2,400 mm, total width: 1,200 mm, overall weight: 920 kg, height adjustment type: mechanical, Manufacturer: GERD WOLFF Bjdevbbqnopfx Ad Aolr Technical Details: • Length 2400 mm • Width 1200 mm • Height 200 mm • Weight 920 kg • Hole diameter 28 mm • Hole spacing 100 mm • Plate thickness: 25mm Advantages and Features: • 3-day gas nitriding process • Increased corrosion resistance • Weld spatter adhesion protection • Maximum load capacity • Enhanced fatigue strength • Improved vibration resistance • Fine scale engraving • Reinforcement with welded seams and ribs on the underside • Optimal working height of 820-865 mm • 6 height-adjustable support legs • Available with a matching accessory set (optional) Our welding tables are manufactured using HT 300 cast iron and are nitrided as a whole after mechanical processing. Furthermore, they feature precise fine scale engraving using laser technology. To ensure adequate stability, our welding tables are reinforced with welded seams and ribs on the underside (see illustrations). Additionally, they undergo a 3-day gas nitriding process, enhancing their corrosion resistance, fatigue strength, and vibration resistance, among other factors. All our tables come with adjustable legs. The minimum height adjustment range is 620 mm, while the maximum is 665 mm, allowing for a variable working height of 820 to 865 mm. Additional available dimensions: • 1000 x 1000 x 200 • 2000 x 1000 x 200 • 1200 x 1200 x 200 • 1500 x 1000 x 200 • 1500 x 1500 x 200 • 1500 x 2000 x 200 • 2000 x 3000 x 200 • 3000 x 1500 x 200 • 3000 x 2000 x 200 • 4000 x 2000 x 200 Please note that the images are not to scale and are for illustrative purposes only. Our welding tables are produced for our distribution brand "GERD WOLFF Maschinenfabrik" by a reputable manufacturer. 3D Welding Table - 3D Clamping Fixtures - 3D Precision Welding Table

See details

Advertise here