Generator

HYUNDAI LDG12S-3

Condition: used, Technical characteristics: LENGTH: 3,600 mms Lodpfxj Dvllo Ah Ueak

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 143 kg, fuel type: diesel, tank capacity: 12 l, color: black, output current: 12 A, output voltage: 400 V, output frequency: 50 Hz, nominal power: 6.8 kW (9.25 HP), continuous power: 6.2 kW (8.43 HP), total length: 730 mm, total width: 500 mm, total height: 620 mm, rotational speed (max.): 3,000 rpm, type of cooling: air, Diesel generator set with 6,8kW. Three-phase generator Proton 3 with very low combustion. An added convenience is remote control with remote control. In short, a reliable engine, copper alternator and plugs. Model, with us since the beginning of the company. Generator perfect for construction sites. ABBREVIATION: Genset type: Three-phase Fuel type: Diesel Air-cooled: Yes Voltage: 400V Rated power: 400V - 6200 watts (7.7kVA) Maximum power up to 15 minutes - 6800W (8.5kVA) WEIGHT: Gross weight: 143kg FUELING: 1.0 liters per hour (at 70% of maximum power) 1.2 liters per hour (at 90% of maximum power) TECHNICAL DATA: Prepared for operation - Yes Type - Portable Year of manufacture - 2024 Condition of the unit - Factory new Manufacturer - Proton Warranty - 24 months Efficiency cos Φ - 0.8 ENGINE: Engine model - Proton 188FA-D Fuel type - Diesel (Diesel) Engine type - High-pressure, 4-stroke Number of cylinders - 1 Direct injection - Yes Type of cooling - Air Displacement - 456 cc3 (88x75) Number of revolutions per minute (RPM) - 3000 Permissible maximum operating time (1 cycle) - 8 hours Cooling time (after 1 cycle) - 60 minutes Oil pressure and level sensor - Yes Type of valve train - Gear-driven valve train Engine speed controller - Mechanical Lubrication method - Forced, engine with oil pump Starter - 800W Oil sump capacity - 1.6l Recommended oil - TITAN CARGO MC 10W40 (semi-synthetic for diesel). Valve type - Electromagnetic, controlled by a single solenoid GENERATOR: Generator model - Proton 180-CAVR-400 Rated current (400V) - 12.3 A Voltage - 230/400V Frequency - 50 Hz Construction of the alternator - Synchronous Degree of protection (of the alternator) - IP 23 CABINET: Housing type - Unbuilt - Open. Ability to exhaust fumes outside the facility - Yes Sound pressure level LPA - 84dB (measurement - 5m, open space) Fuel tank capacity - 12 liters Operating time on a full tank (Average) - 8 hours SOCKETS: Number of three-phase outlets - 1 piece (16A 5-pin) Number of single-phase sockets - 3 pieces (8A) Number of other sockets - 1 piece (12V) DIMENSIONS: Diameter of wheels - 22 cm Width - 50 cm Length - 73 cm Height - 62 cm FEATURES: DualPower™ technology - Yes Automatic start (ATS) - Yes - adapted Voltage stabilizer (AVR) - Yes - built-in Remote control - Yes (up to 90m outdoors) Starting type - Electric, Manual (from a cord) Glow plugs - Yes Fuel level indicator - Yes Voltmeter - Yes Ammeter - Yes Current protection - 3xC16 (for 400V) Hour meter - Yes Battery - 36 Ah Transport kit: Yes - Large wheels Yes - Handles RICH EQUIPMENT See below what else the kit includes: - Battery Lodpfjtrmc Rox Ah Ujak - Air, oil, fuel filter - Keys for ongoing maintenance - Plugs Why our company? We are a company specializing exclusively in generators, for more than 17 years we have been in this business constantly striving to make our products represent the highest quality and most reliable. We have a wide range of generators from 6 to 300kW on a variety of engines including English Ricardo, American Cummins or German Deutz and in various configurations made specifically for customer requirements.

Condition: new, Year of construction: 2023, Standby power 20 kVA (16 kW) Full load 17.5kVA (14kW) Voltage 230/400V Generator power 16 kW Generator continuous power 14 kW Number of phases 3 ECU adjustment Fuel tank capacity 60 l Liquid cooling Frequency 50Hz Lsdpfxei Nthqe Ah Uoak Rotation speed 1500 rpm. Engine type in-line, 4-cylinder, naturally aspirated Cylinder diameter and length 98 x 105 mm Engine capacity 3.2 liters Capacity oil approx. 3 l (between the min./max. value on the dipstick) Capacity coolant approx. 5 l diesel fuel Compression ratio 17.2:1 DATAKOM D300 control panel Insulation class (alternator) H Number of windings (alternator) 12 IP degree of protection (alternator) IP23 Shunt excitation type Voltage (alternator) +/- 1% Overall dimensions (length x width x height) 2000 x 900 x 1070 mm EURO III emission standard Weight 730 kg

Condition: used, Year of construction: 1990, functionality: fully functional, machine/vehicle number: C4652, grinding length: 5,100 mm, grinding width: 250 mm, overall weight: 9,100 kg, space requirement height: 2,300 mm, space requirement length: 9,000 mm, space requirement width: 4,000 mm, Reform AR 51 Type 7 Surface grinding machine Year of manufacture: 1990 Grinding length: 5100mm Grinding width: 250mm Workpiece height: 220mm Total power requirement: 36kW Used water system Laedpotqtk Asfx Ah Usk Lifting station, magnetic roller, pump

Condition: new, GEKO Generator 9000 ED-S/SEBA RSS cube Note: Current delivery time approx. 6-9 months from receipt of order - subject to change without notice. Equipment: Standard 12V DC socket for connecting 12V consumers, powerful synchronous generator for high starting currents, carrying handles. 1 three-phase CEE socket (16A), 2 safety sockets (16A) Optionally with IT/TN mains switching Generator Synchronous el. Power: 3~ cos φ 0,8 9000 VA el. Power: 1~ cos φ 0,8 5000 VA Voltage 3~ 400 V voltage 1~ 230 V Current 3~13 A Current 1~ (CEE) 21 A Current 1~ (Schuko) 16 A Frequency 50 Hz Protection class generator IP 54 Engine type B&S Number of cylinders 2 Speed 3000 rpm Fuel type gasoline Engine oil capacity 1,7 l Engine power 10,6 kW Cooling engine/generator air/air Tank capacity 14.9 l Operating time: full load/half load 3,8/5,7 h Laedpfx Ajgy Hazeh Uek Weight (ready for operation incl. battery) 134kg Dimensions L x W x H 700 x 440 x 580 mm Sound power level LWA 93 dB(A)

Condition: used, Year of construction: 2007, reus 8000 min-1 U/min Weight 5500 kg Year 2007 Control Siemens 840D Dimensions (L/W/H) 3600 x 2800 x 2400 mm Lasdpewm Rqajfx Ah Uok travel -x axis 1035 mm travel -y axis 560 mm travel -z axis 510 mm

Condition: like new (used), functionality: fully functional, overall weight: 749 kg, fuel type: electric, total length: 2,765 mm, total width: 1,346 mm, total height: 1,435 mm, power: 37 kW (50.31 HP), volume flow: 6.6 m³/h, pressure (min.): 5 bar, pressure (max.): 12 bar, ambient temperature (max.): 50 °C, noise level: 61 dB, type of cooling: water, Year of construction: 2023, machine/vehicle number: APP876730, The Atlas Copco E-Air H250 VSD is a single-stage, oil-injected screw compressor driven by an Atlas Copco electric motor with class H insulation and a speed of up to 9000 rpm. Unique to this new range is the PACE functionality in conjunction with the intuitive XC2003 control system. This ground-breaking technology enables multiple pressure and flow settings, allowing you to adjust the airflow and pressure to suit the requirements of your application. The E-Air VSD motor is characterized by its compactness, energy efficiency and quietness. In addition, the compressors are easy to install and operate. No exhaust fumes, unrivaled performance, low noise level. A plug-and-play design also allows you to transport the E-Air anywhere. Warranty for demonstration unit: 12 months from delivery Scope of delivery of the compressor: - Integrated permanent motor from Atlas Copco - Soundproofed HardHat hood - Cooling circuit with aftercooler - Air and compressed air connection - Air/oil separator and control systems - Leak-proof frame made of ASTM A653 Zincor sheet steel with powder coating - Closed floor pan - Undercarriage/chassis with fixed drawbar and hydraulic brakes - Overrun and parking brake, automatic reverse, star wheel Ledjud H Tnepfx Ah Usak - Truck DIN towing eye (40 mm), car coupling enclosed loose - 205R14C wheels for trailer operation - Lighting and operating license according to StVZO

Condition: new, Year of construction: 2024, functionality: fully functional, 1290 is a professional laser cutter for serious manufacturing. It has two laser heads, which transform this CNC laser machine into a super-efficient monster that works 24/7. In addition, this laser engraver and cutter features a lighting table with a powerful chain that can hold workpieces weighing up to 80 kg. Wattsan 1290 ST can cut up to 10–13 mm and engrave wood, cardboard, acrylic, glass, rubber, stone, wool, etc. Two laser heads function simultaneously at a minimum distance of 130 mm apart. And this model’s table has a lowering depth of 160 mm. Lodpfx Ahjrvimxj Ujak You can give our managers a call for additional details! Wattsan 1290 Duos LT characteristics: Working area: 1200x900 mm Laser power: 100-130 W Working table lowering depth: 160 mm Positioning precision: 0,03 mm Machine size: 1410 x 1790 x 670 mm + if it is on wheels 315 mm Packing size: 1920 x 1630 x 820 mm Weight: 393 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK

Condition: new, K-280 sharpener is a device thanks to which you can professionally sharpen various types of grinder knives and plates in your plant. The sharpener is fully automated. The built-in programmer allows the user to program parameters such as time, thickness of cut and tempo. The device has a magnetic holder built-in. The machine is perfect for meat processing plants and the meat industry. Specification: Producer: BMG TRADE Laedpfx Aod E I Utsh Uek Model: K280 Dimensions: 1150 x 570 x 625 (mm) Power supply: 400V 50Hz Total motor power: 2.67 kW Cooling pump power: 0.12 kW Rotation: 2860 rpm Tank capacity: 33 L Thickness of cut: 0.2mm; 0.4mm; 0.8mm; 1.2cm; 1.6cm; 2,00cm Program of grinding pace Rotation: Right / left Weight: 400 kg

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. Lasdpotpxgtjfx Ah Ujk With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!