Jenbacher 320 gas generator

jenbacher 320

Condition: new, Year of construction: 2026, functionality: fully functional, power: 999 kW (1,358.26 HP), input voltage: 400 V, type of cooling: water, warranty duration: 6 months, input frequency: 50 Hz, Equipment: documentation/manual, We are pleased to offer for sale a brand-new Jenbacher J320 D05 Combined Heat and Power (CHP) unit, featuring an electrical output of 999 kWe. The equipment is brand new, has never been commissioned or operated, and has zero operating hours. 1. Technical Specifications Manufacturer: Jenbacher Engine Model: J320 D05 Equipment Type: Combined Heat and Power (CHP) Unit Electrical Output: 999 kWe Fuel Type: Natural Gas Condition: Brand New – Never Operated Fodpfx Aae Ahwibonopp Operating Hours: 0 Hours Availability: Immediately Available Location: Greece 2. Available Configurations Option 1 – Standard CHP Unit | Immediate Availability The brand-new Jenbacher J320 D05 CHP unit is available in its standard configuration and ready for immediate delivery. Option 2 – Containerized CHP Solution | Optional Upon request, the CHP equipment can also be supplied and installed in a specially designed containerized solution. This configuration offers a comprehensive, project-specific solution tailored to the customer's technical, operational, and installation requirements.

Year of construction: 1991, condition: excellent (used), Fully automatic gate system HDN 600 with automatic infeed ZE, including mechanization. Technical data: Passage height: 700 mm Passage width: 735 mm Stroke: 600 mm Feed rate: max. 15 m/min Water-cooled guides Fpedpfxez Ehfas Aanjp Drive – Gearbox The system has demonstrably only been in operation for 10 years.

Condition: new, Year of construction: 2023, functionality: fully functional, fuel type: gas, output voltage: 400 V, output frequency: 50 Hz, rotational speed (max.): 1,500 rpm, motor manufacturer: Jenbacher, NEW power plant equipped with a refurbished generating set; two units are immediately available. NEW container, NEW fittings, Dia.Ne XT4, and a fully overhauled generating set; overhaul report available. ECOMAX 10 G2P NGS with a containerized Jenbacher JGS 320 GS-N.L 400V. Accessories and piping are partially visible and partially packed, as these are NEW systems. Drawings and engine data sheets are available. Fpodpfx Aaoz D H Dlonep Option to switch to the EGHE 200°C + bypass configuration. Further customization can be discussed.

Condition: excellent (used), Year of construction: 2010, operating hours: 120 h, functionality: fully functional, power: 1,064 kW (1,446.64 HP), fuel type: gas, output frequency: 50 Hz, Jenbacher J320 GS Fpjdpfjwd Nw Tex Aanop CHP unit price includes dismantling and loading onto your trucks. Year: 2010 Power: 1064 KW Frequency: 50hz Running hours: 120k (overhaul at 100k) reports available. Currently running Full tech data sheet available. Set in very good condition. Serviced and maintained by engineers. Contact for more info and pictures.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, fuel: liquefied natural gas (LNG), - 1x CHP unit - As new - Control cabinet still in original packaging - Located in Genthin Fodpfxozazrae Aanepp We are selling a CHP unit in as-new condition. It has never been used, and the control cabinet is still in its original packaging. It has never been used but has been regularly maintained and is fully functional. The CHP unit is located in Genthin and can be inspected at any time.

Condition: ready for operation (used), Year of construction: 1993, functionality: fully functional, fuel type: gas, output current: 178 A, output voltage: 6,600 V, output frequency: 50 Hz, continuous power (apparent): 1,976 kVA, motor manufacturer: MWM Deutz, 4 units: Engine: MWM Deutz TBDG 441 BV16, dual fuel, gas, diesel, year 1993. Spare parts also available for sale, including turbochargers, injection pumps, cylinder heads, crankshafts, etc. 2 units: Generator: AVK 6600V 173A 50Hz, control unit. Fpedpjy Hmhbefx Aansp

Condition: excellent (used), Viessmann Vitoplex 900 kW. Biogas container plant, heating centre, year of manufacture 2021. Seldom used. Fodpfoywzvuex Aanspp

Condition: ready for operation (used), Year of construction: 2016, operating hours: 32,524 h, functionality: fully functional, type of input current: three-phase, input voltage: 6,300 V, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, fuel: domestic gas H, fuel type: gas, Equipment: documentation/manual, rotational speed infinitely variable, GAS GENERATOR PLANT – JENBACHER J616 GS J11 (Complete Package) This offer is for a complete power plant package, comprising cooling system, pumps, lubrication system, electrical system, and exhaust system. Total operating hours (since new): 32,524 h Maintenance: Fully serviced by INNIO Operating hours since 30,000 h major overhaul: 2,524 h Major overhauls performed (20,000 h and 30,000 h): fully completed. At the 30,000 h major service, the following components were replaced with new parts: turbochargers, pistons, connecting rods, cylinder liners, piston rings, as well as main bearings and connecting rod bearings. Fpjdpfxeytg Rbj Aanop Technical specifications: Electrical output: 2,745 kW Year of manufacture (YOM): 2016 Fuel: Natural gas Speed: 1,500 rpm Frequency: 50 Hz Alternator: Leroy-Somer Voltage: 6,300 V Scope of supply (included): - Jenbacher genset - Auxiliary control cabinets - DIA.NE XT4 - Gas ramp - Cooling system (high- and low-temperature pumps) - Thermal fluid recovery boiler - Silencer - Protection switchgear - Transformer 6.3 kV / 15 kV, 3,500 kVA (included) - Documentation Availability: Immediately

Condition: excellent (used), Year of construction: 2005, power: 225 kW (305.91 HP), fuel type: diesel, type of cooling: water, Regularly maintained Volvo Diesel fire water pump for sale in new condition Machine hours: 298 inspection and oil change at all maintenance intervals, regardless of use. Manufacturer: Kagema DPA Engine: Volvo Penta TWD 710 V 218 kW / 296 HP 6-cylinder diesel engine Data: Manufacturer: Volvo Penta Type: TWD 710 V. Spec.NO .: 868725 Serial number: 2071093240 Vermogen: 225 kW / 304hp Speed: 2450 rpm Fuel: diesel Length: 330 cm Width: 120 cm Height: 220 cm tank: 400liter Fedpfxehfl Dme Aanopp water transport ca: 800-900m3 6.5 bar pressure water pump type: KSR-MXN 150-315 "missing" Purchase of industrial equipment and machinery. Wide Range of Used Machinery, Industrial Equipment

Condition: excellent (used), Year of construction: 1997, functionality: fully functional, Log handling line, LINCK sawmill line, lumber sorting line with stacking system Log handling line: - Infeed - Cut-to-length - Turner - Emergency outfeed channel, possibility of log discharge - Root flare reducer (butt reducer) - Valon Kone debarker - Metal detector - Hellak DLV 720 - Log sorting line - 32 boxes LINCK sawmill line: LINCK Canter V40, year 1997 • Max. roundwood diameter: 650 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min Fpedpfeyyd Tnex Aanep • Cutter head drive power: 90/132 kW • Number of knives: 3 • Cutting depth: 160/200 mm LINCK Multi-rip saw CSMK 375-A3/B3, year 1997 • Min. timber length: 3.00 m • Min. cutting thickness: 50 mm • Max. cutting thickness: 375 mm • Feed speed (frequency controlled): 25-70 m/min • Saw diameter: 648 mm • 648x5.7/3.5/6.8x160 Left • 648x5.7/3.5/6.8x160 Right • 648x5.7/3.5/x165 Plate • Shaft speed: 2500 rpm • Drive power per saw shaft: 110 kW • Weight (with motors): 18800 kg LINCK Turner DV 55, year 1996 • Feed speed: 36.2 m/min • Max. log diameter: 550 mm LINCK Canter V30, year 1996 • Max. roundwood diameter: 500 mm • Min. roundwood diameter: 100 mm • Max. log length: 6 m • Min. log length: 3 m • Feed speed (30-80Hz): 25-70 m/min • Cutter head drive power: 90/132 kW • Number of knives: 2 • Cutting depth: 160 mm LINCK Milling unit VP34 • Min. timber length: 3 m • Max. timber length: 4900 mm • Max. milling depth: 50 mm • Max. cutting height: 120 mm • Min. board width: 60 mm • Feed speed (50Hz): 41.7 m/min LINCK Saws S2 VS 66 S • Min. timber length: 3 m • Cutting height with inner saw: 280 mm • Cutting height with outer saw: 280 mm • Feed speed: 36 m/min • Saw diameter: • 505x5.2/3.6/6.8x120 mm Left • 505x5.2/3.6/6.8x120 mm Right LINCK Multi-rip saw S3 VSV 80-A, year 1988 • Min. timber length: 2.50 m • Cutting height: 280 mm • Feed speed: 40 m/min • Saw diameter: • 510x5.2/3.6/6.8x120 mm Right • 510x5.2/3.6/x120 Plates LINCK Horizontal saw KH1, year 1985 • Min. timber length: 3 m • Min. cutting height: 60 mm • Max. cutting height: 140 mm • Max. cutting depth, right saw: 140 mm • Max. cutting depth, left saw: 140 mm • Min. cutting depth: 130 mm • Feed speed: 40 m/min • Saw diameter: 520x5.8/4.0x150 mm Lumber sorting: Lumber sorting by length, width and thickness 32 boxes for lumber Stacking and bundling system for lumber packs The offered line has a real capacity of approximately 70 000 m3 - 110 000 m3 per year in one-shift operation. Huge spare parts inventory. Sharpening room. We offer complete service from sale to installation and commissioning in the new location. For an additional fee, professional dismantling, loading and commissioning in the new location are possible.