3 die - 3 blow transfer header

JERN YAO JBF-10B3S

Condition: good (used), Flat-jaw thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, knurling machine, thread rolling machine -Manufacturer: EWM, flat jaw thread rolling machine knurling machine Ijdpfxji Eg Nko Apnjib -Type: unfortunately without type designation -Drive: 4.6/5.8 kW 1435/2890 rpm -Belt drive: 3-way adjustable -Knurling plate: RAA 1.0 -Central lubrication: -Dimensions: 1680/920/H1440 mm -Weight: 1308 kg

Condition: ready for operation (used), Year of construction: 1970, functionality: fully functional, shaft length under head: 30 mm, section length (max.): 52 mm, Hilgeland CH1 KHA double-acting press Iisdpeur N Daefx Apneb Year of construction 1970 The machine is ready for immediate use!

Condition: ready for operation (used), functionality: fully functional, cutting height (max.): 1,200 mm, cutting width (max.): 1,100 mm, Danobat CP 1211T Large Capacity Bandsaw Cutting Capacity Dia / Square 1100mm Cutting capacity rectangle 1200mm wide x 1100mm high Fully automatic Iiedpfx Apjtv Nadenjb

Year of construction: 1995, condition: good (used), CHUN ZU CH-10LL DOUBLE STROKE HEADERS Max cut-off diam.: 10 mm. Max cut-off length of shank: 193 mm. Max shank length of blank: 153 mm. Speed: 70 ppm Iiedpfxelnll Aj Apneb Complete with lots of tooling

Condition: ready for operation (used), Year of construction: 1974, functionality: fully functional, machine/vehicle number: 817, Complete Cold Heading Line (includes 3 machines) One Die Two Blow Header Ijdpfetqu U Tex Apnoib Max. Wire Cut-Off Diameter: 25 mm Cut-off length: 300 mm Shaft Length Under head: 260 mm Extrusion machine Trimming machine

Condition: excellent (used), Monitoring Solution for Multistation Header and Boltmaker Iedsxfzmmjpfx Apnsib Process monitoring for cold forming, e.g. for multi-stage presses and for screw presses (boltmakers) Schwer+Kopka SK500 and SK5 devices detect process faults, protect the machine and mould from overloading, improve the quality of the parts produced and help operators to set up the machine more quickly. In the event of production problems (e.g. mould breakage or ejection errors), they switch off the machine at an early stage to prevent costly consequential damage to the machine and mould. More systems available.

Condition: used, Year of construction: 1993, machine/vehicle number: 493187, Lg. No. 21236 Hydraulic - twin-column guided miter - metal band saw Technical Data: - Cutting range at 90° Round 360 mm - Rectangle 600 x 360 mm - Cutting range at 45° Round 320 mm - Miter adjustment via handwheel - Saw band size 5400 x 38 x 1.3 mm - Cutting speed steplessly adjustable 19 - 130 m/min - Cutting pressure steplessly adjustable 0 - 10 m/min - Manual material clamping - Pre-selection of the stroke height of the saw band - Micro-spray coolant system - Total drive power 400 V / 8 kW - Space requirement ca. W 1800 x H 2000 x D 3250 mm Iedpfx Apewqpmnjneib - Weight approx. 2200 kg - Infeed + outfeed roller conveyors each approx. 6000 / 8000 mm

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 612334X00379, Year of construction: 2020, operating hours: 2,810 h, load capacity: 750 kg, lifting height: 10,610 mm, fuel type: electric, construction height: 4,400 mm, battery capacity: 930 Ah, battery voltage: 80 V, fork length: 1,250 mm, overall weight: 8,330 kg, Equipment: lighting, Attention: The complete equipment list of the vehicle is included as a photo in the images of the ad! STILL Order Picker MX-X 80 – Used unit with premium features, single sale Vehicle Data: - Model: STILL MX-X 80 (Very Narrow Aisle Truck with Pivoting Reach Fork) - Year of manufacture: 2020 | Operating hours: approx. 2,810 h - Load capacity: 800 kg | Lift height: 8,750 mm | Height: 4,400 mm - Additional lift: 1,800 mm | Fork length: 1,250 mm | Aisle width: 2,200 mm - Pivoting reach fork: 180° swiveling, max. 1,400 kg at 600 mm LSA Iiodpjw U El Tjfx Apnjb - Adjustable forks: hydraulic, outer width 400 – 1,650 mm Features (Selection): - Mobile personal protection system with 2 laser scanners, fully factory-integrated - Special design pivoting reach fork carriage with reinforced capacity, reach carriage for wide loads up to 2,600 mm - IZF – Inductive Guidance System with guide wire detection, lane detection, automatic aisle recognition & emergency stop on signal loss - Cabin: Combined design for standing/seated order picking, with LED work lights, warning beacon & polycarbonate windshield - Ergonomic driver’s seat (fabric-covered, height & tilt adjustable, suspended), foldable - Control panel: multifunctional, steering knob, 5 programmable favorite keys, contactless two-hand sensor, MMS terminal preparation - Safety: automatic braking, stop & absolute stop at aisle ends, rescue lowering system, RFID-controlled height limit (2 definable heights) - OPTISPEED 3.0: dynamic load display depending on fork height, automatic reach reduction - Additional equipment: Panoramic rear-view mirrors on both sides, DIN A4 writing pad, modular accessory system on cabin railing Battery & Charger: - 80V traction battery (930 Ah), low maintenance, with central water filling system (STILL) - External charger D 80/100 PXS, charging time approx. 9–11 h, 400 V / 32A CEE, LED charge status display Special features: - Extended chassis – ideal for special pallets/corlettes – no disadvantage in racking applications - Machine is currently set up and ready for demonstration - Single unit – not available as a series sale, we bought the truck ourselves 1 year ago but did not set up a warehouse Condition & Removal: - Very well maintained, fully functional, no known defects - Removal only possible by crane (hall height 10 m) – disassembly required and to be organized by the buyer or by arrangement

Condition: good (used), Straightening machine, wire straightening machine, unwinder, straightening machine combination, pay-off reel, wire unwinder, double reel, reel, pay-off reel, motor-driven reel for wire processing, punch, eccentric press, hydraulic press, punching machine, motor reel, winding roll, unwinder, wire unwinder -Wire straightening machine: decoiler-straightener combination -Type:not visible -Note: without documentation -Engine: Fukota 1.5 kW -Straightening rollers: for Ø 20 mm, see photos -Receiving rollers: Ø 152/215 x 1330 mm -Total dimensions: 3040/2450/H2525 mm Isdpfx Ajin Rn Ajpnjib -Weight: 2080 kg

Condition: used, Year of construction: 2020, operating hours: 3,415 h, lifting height: 10,890 mm, fuel type: electric, mast type: duplex, fork length: 1,200 mm, color: grey, Empty weight: 9.200 kg Lifting capacity: 1.200 kg Price: On request Iiodpfx Apoyc Smyonjb - Year: 2020 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 612334X00160 - Operating hours: 3415 - Working level: Hoog - Lifting capacity: 1200kg - Lifting height: 10890mm - Overhead clearance: 6000mm - Fork length: 1200mm - Options: Man-up - Mast: Duplex - Drive: Electric - Brand/Type: 04EPZS0620SC - Battery year of construction: 2020 - Capacity: 620Ah - Battery voltage: 80V - Transport weight [kg]: 9200kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom