Scissor lift

JLG 260 MRT-A (40622)

Condition: used, Year of construction: 2010, turning diameter over bed 0316 mm turning length 340 mm control ultimax Hurco turning diameter over bed slide 240 mm swing dia. 402,5 mm spindle turning speed - stepless 0- 6000 U/min- rpm spindle bore 45 mm Lsdpfeydqpiox Anxeag feeds 0- 30 m/min voltage 400 V connected load 14 KW face slide travel 185 mm longitudinal travel 340 mm dimensions of the machine ca. 3,76 x 2,92 x 2,15 m taper diameter VDI 20 mm main drive motor 11,5 kW weight of the machine ca. 3,2 t Machine has 12 position turret and a bar loader.

Condition: new, Year of construction: 2025, Genie Z-45FE hybrid articulated boom lift, new, used, demonstration machines available Laedpfxornqpwo Anxjg

Condition: new, Year of construction: 2026, Genie GS1932m Micro E-Drive scissor lift, new, used, demonstration machines available Lajdpfx Anericrajxeg

Condition: new, empty load weight: 15,420 kg, maximum load weight: 61,080 kg, overall weight: 76,500 kg, axle configuration: > 3 axles, loading space length: 8,600 mm, loading space width: 2,540 mm, loading space height: 900 mm, tire size: 235/75/r17,5, color: grey, Equipment: ABS, Gooseneck: Gooseneck with rear bevel of approx. 750 mm x 10° 3 pairs of lashing rings Hardwood decking 30 mm thick Loading platform: Loading area in extendable design with rear bevel of approx. 500 mm x 8° 8 pairs of lashing rings can be folded outwards 1 pair of lashing rings lying in the front of the cargo bed Cut-outs in the outer frame of the cargo bed for attaching lashing straps Hardwood flooring approx. 48 mm thick, checker plate flooring over the axles Two-part steel ramps: A pair of galvanized two-part steel ramps approx. 2,750 + 1,400 x 800 mm with approx. 48 mm thick hardwood decking. Ramp with hydraulically folding and unfolding ramp sections, hydraulic lifting gear and hydraulically movable. Maximum load per pair: 50,000 kg. Seat posts: - JOST fifth wheels (mechanical) with 2-speed gearbox for 24t lifting load (50t test load). Axles and tires: BPW axles and suspension, 4th + 5th axle self-steering Technical axle load: 12,000 kg 4th and 5th axles with electro-magnetic reverse lock via reverse gear and manual activation Tires 235/75 R 17.5 3PMSF Brake system: Brake system in accordance with EU regulations with EBS-E (4S3M) Sockets and lighting: Electrical system in accordance with EU regulations, 24 volt lighting ASPÖCK-NORDIK (ASS3) ASPÖCK-UNIBOX on the front connection strip with 24N, 24S & 15-pin sockets Connection according to ISO 24N ISO-1185 24S ISO-3731 15 pole ISO-12098 Paint finish: First-class and durable corrosion protection of the standard shot-peened welded frame guaranteed by a 2-component (2K) zinc dust primer A high-quality 2-component (2K) top coat in a single color in MB 7350 nova grey Rear section metallized and painted in RAL 9010 (pure white) No metallic paint finish possible Steel construction: Steel construction made from high-strength fine-grained steels Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Accessories: One spare wheel with holder in front of the bulkhead 2" kingpin One galvanized steel bulkhead approx. 400 mm high Yellow-red air couplings on the galvanized connection strip at the front 2 restraining shoes with holder on the bulkhead Mounting in the rear area of the gooseneck for ALU docking lights A bracket for a rotating beacon at the rear of the trailer Galvanized supports under the bevel of the loading area White reflective tape in accordance with EU regulations on the sides, on the extension and red at the rear Electro-hydraulic unit at the rear under the cargo bed A holder for the warning signs, including a socket, on the gooseneck and on the rear panel on the left and right respectively Control valves for the ramps mounted on the right-hand side of the trailer A mud flap at the rear of the trailer Manual and description on USB stick 3.5" kingpin supplied loose ALU drop sides and rear wall can be plugged onto the gooseneck approx. 2,440 x 400 mm (LxH) The rear galvanized stanchions are removable (length of the body approx. 2,560 mm) 3 pairs of WADER container pockets in the loading area for a 20' (30') or a 40' container 6 pairs of stanchion pockets for 100 x 50 mm stanchions in the outer frame of the cargo bed Galvanized extensions, extendable by approx. 230 mm per side Laedpfxjl Sl Izj Anxog Lift axle on the front axle with control by TEBS E depending on the current axle load and the current load status Square climbing rails 20 x 20 mm every 200 mm on the outer frame of the loading area slope On the chequer plates, above the kingpin and the load floor

Condition: used, Gearbox, bevel gear, worm gear -Gearbox: Worm gear ratio: i = 7.5 -Shafts: Ø 14 x 34 mm / see photos Ljdpfet Snw Sex Anxjag -Dimensions: 122/105/H140 mm -Weight: 4.2 kg

Condition: used, Technical details: table length: 3600 mm table width: 3600 mm table load: 50 t table travel: 2000 längs / longitudinal mm table height over floor: 1350 mm table speed: ca. 1000 mm/min table rotating: 360 ° total power requirement: 14 kW weight of the machine ca.: 38,5 t dimension machine xH: 5,5x3,7x1,4 m space requirements of the machine approx.: 6,2x3,7x1,4 m Main areas of application: -Multi-sided machining -Supplement for travelling column milling machines or boring mills Electric and mechanics of the Rotary Table have been overhauled. - newly equipped with a digital measuring system (DRO) for x-travel and rotation - control via control panel - table clamping plate 14t weight - table load capacity 50t 11 pcs T-slots according DIN 650: - a=42mm - h=75mm - b=70mm - c=31mm Rotary Table can be inspected under power! Following work has been proceeded: - Integration of a Digital Read Out (DRO) for the x axis and a rotary encoder for C-axis - integration of a control via a control panel - renewal of hydraulic pipes / hoses, screw connections, manometers, flow chokes and filters - bearing of both axis transmissions - control cabinet and complete machine cabling has been renewed - end positions cleaned, checked, adjusted and defective replaced by new ones - frequency converter for continuous speed retrofitted - preparation of the necessary documentation (operating instructions, electrical and hydraulic diagram) - cracked gearbox housing repaired via casting lock - renewal of the guideway wipers Ljdpfxju N D Rqe Anxoag - processing of the guideway cover including new wipers - machine has been repainted - renewal of axis drives - feed gear cleaned and resealed - feed motor new bearing installed *

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 12254 B521 860, Overheadcrane ± 10.500 mm x 12.500 kg Laodpev Ip Egofx Anxsg

Year of construction: 2007, condition: good (used), functionality: fully functional, machine/vehicle number: 12428 B500-851, Overheadcrane ± 14.170 mm x 25.000 kg Ljdpfxev Ip Afj Anxsag

Condition: like new (used), Year of construction: 1986, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 200 V, type of input current: three-phase, pressing force: 160 t, table width: 600 mm, table length: 2,030 mm, overall weight: 19,000 kg, year of last overhaul: 2020, punching force: 160 t, ram adjustment: 130 mm, Equipment: safety light barrier, Gyártó: AIDA NC2-160 (1) Tolóerő: 160t Laodpfxju D Ad Ee Anxog Gyártási év: kb. 1991 Lökethossz: 130mm Asztal feletti távolság: (állítható) 235-335mm Asztalméret: 2030x600mm Csapágyméret: 1500x600mm Teljes válaszidő: 240 ms nedves tengelykapcsolóval és fékkel Hidraulikus túlterhelésvédelem Motoros szánállítás Változtatható sebességű hajtás Elektromos teljesítmény: 3x200V(!!), 15kW - japán szabvány Nettó tömeg: 19000kg Méret: 2140x2210x3175mm Automatikus zsírzórendszer. Automatikus vágóolaj-adagolás - RAZIOL EST-02 Opcionálisan lapadagolóval és egyengetővel.

Year of construction: 1971, condition: excellent (used), CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Large stone and flanch package Centre height: 316mm Grinding Ø: 632mm Grinding length: 3000mm Grinding stone dimensions:800 x 305 x 105mm Grinding stone speeds: 1000Rpm Table inclasement: 9,1° Coolant system: Yes Filtration: Yes CNC Dresser KW with Siemens 840D new in 2002 HeidenHain measuring scales Siemens Servo engines Crankshaft and External grinding Large steady rest package Ledpfxjm Twz Ao Anxeag Large stone and flanch package Length: 10100mm Width: 2600mm Height: 2300mm Weight: 15000kg