Reciprocating compressor

Josef Mehrer A3V

Condition: new, 900 mm 900 mm 900x900 mm saw band length 9300 x 67 x 1,1 mm table height 790 mm band speed 14 - 60 m/min total power requirement 11 kW weight of the machine ca. 8,45 t dimensions 4,485 x 1,68 x 3,15 m The semi-automatic, hydraulic saws from the X-tech line offer the best Saw technology and best performance when cutting special steels • The electro-welded machine frame and the steel saw frame meet requirements all cutting needs and eliminate vibration and noise. • The chip conveyor is hydraulically driven and the speed is adjustable • All movements of the machine (saw frame, vice, feed, Saw band guides) are carried out thanks to modern linear guides with high static and dynamic load performance, which also has very low sliding friction to guarantee. • Another characteristic feature is the roles for the Positioning of the material by a hydraulic motor are driven. They move at right angles to the material, and thus allowing optimal clamping of the material. • Thanks to the height control of the saw band position, the operator can place the band in place near the top edge of the material. After the cut is finished, the tape automatically raised back to the previous position. Alternatively you can also “Remain” can be selected in the lower position. During the The software compares the cutting load with the cutting cycle Default. This means that the sawing system can be stopped in the event of irregularities become. • The saw band is cleaned by two adjustable steel brushes. The drive takes place hydraulically. • The hydraulic unit including filter and pressure gauge guarantees one particularly quiet operation at constant pressure. Tsdpsfg E Hpofx Adljf • Finely ground carbide inserts that clamp the saw blade, complete with lateral, hardened and adjustable guide rollers. The adjustable one The tape guide automatically moves as close as possible to the material. • The saw band is tensioned via a hydraulic cylinder, which is carried out by the Machine software is controlled. The voltage is set according to a given Time automatically delimbed when the machine is idle or after a cycle has been carried out. • Automatic version with CNC control in the X-TECH 900 / 1200 models a feed length of 500 mm for the series for high production rates. • The material is carried by a table with seven rollers. These will driven by a hydraulic orbital motor through which the material can be placed precisely even under maximum load. • All guided movements are carried out by four recirculating ball guides with one high capacity for static and dynamic loading; strong reduced feed friction. Tempered and ground prismatic Guides. Price on request.

Condition: excellent (used), vertical band saw Make Heska Tjdpfx Aetr Emmodljf type ES 5 throat 500 mm maximum cutting height 310/270 mm table size 600 x 600 mm Table can be tilted Band welder IDEAL type BS=-16 Saw band speed infinitely variable width 1070 mm Depth 800 mm Height 1960 mm with pallet Weight 360 kg

Condition: as good as new (ex-display), 1.000 m barely used HDPE dredge pipe with lose flanges Tjdpfx Adef Tdn Ujlof 500 m used HDPE dredge pipe with fixed flanges

Condition: ready for operation (used), Year of construction: 2002, Speed: 4500rpm, max. bowl diameter: 300mm/167mm, solids: 2.6kg/dm³, material temperature min./max.: 5°C/100°C, bowl dimensions X/Y: 300mm/1200mm, machine material: stainless steel, operating hours: 62293h. Including spare parts. On-site inspection is possible. Tsdpfx Aou Av H Dodlof

Year of construction: 1989, condition: good (used), Good condition, with connection for sealing water. Tjdpfxoc Iu Uie Adljf Head : 86 meter / 8,6 bar Flow rate : 600 m³/h Rotation speed: 1450 rpm Drive line: 190 Kw Can also be used as a turbine!

Condition: excellent (used), functionality: fully functional, power: 5.5 kW (7.48 HP), rotational speed (min.): 6,500 rpm, Equipment: documentation/manual, belt drive separator clarifier for juice , oils 5,5 kw self cleaning centrifuge in excelent working condition up to 2,5 mc/hour Todpfjvm Uv Ijx Adlef 2 units in stock WESTFALIA SA 20 ATEX 11KW =18000 EURO

Condition: used, Thread cutting machine with Stehler jaws, thread cutting head -Chuck diameter: 190 mm Tsdpfsb A Ncuex Adlsf -Size: 1/2 - 2 inches -Weight: 130 kg

Condition: excellent (used), Year of construction: 1999, Piston compressor 11 bar, 650 l/min intake capacity 4.1 kW 380 V Year of manufacture: 1999 Tjdpfxsiz Trts Adlof

Condition: new, Year of construction: 2025, functionality: fully functional, Loading, unloading, loading dock, access, mobile ramp 25T ramp, 2.5M width TM-GROUP THE BEST CHOICE ON THE MARKET ✅ Specification: Manufacturer: TM-GROUP Maximum load capacity: 25 tons Internal ramp width: 2500 cm Ramp barriers on both sides Ramp rollers for easy movement Central handle for moving the ramp with a forklift Angle and flap height adjustment Lubricated moving parts Equipped with a winch Custom ramp dimensions available for an additional fee Height adjustment with motor (optional) ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Ramp grating - galvanized grating with anti-slip grooves: Secure and safe surface. Forklift and pedestrian traffic have the best possible grip and support. The grating has thickened galvanization with the option of disassembly. ✅ Forklift handle - installable on both sides: Convenient and quick attachment for forklift transport allows the ramp to be moved in all directions. Specially designed handle allows maneuvering even in limited space. ✅ Chain for connection to a TIR truck, wagon, or fixed warehouse ramp: Solid steel chain is another advantage of our ramp, additionally secured to prevent ramp movement during loading operations. ✅ Solid side barriers: Protective barrier with the option to remove and install a frame/roof (roofing is optional). ✅ Electric height control for the ramp: Smooth electro-hydraulic drive uses a high-quality pump. The pump requires 230V so it can be operated from a standard socket. ✅ Dual-sided manual pump: Hydraulic pump for height adjustment in case of no access to electro-hydraulic power - dual lifting. This is an excellent solution for working in any conditions. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. Tsdpjrp Ekfefx Adlef - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: ready for operation (used), Ball Mill, Grinding Mill, Used Equipment Overall dimensions: 1700 x 1170 x 1660 mm Weight: 1500 kg Electrical specifications: 400V Drum diameter: 880 mm Drum length: 880 mm Volume: 535 liters Tsdpfxju Hkdxe Adlsf