Electric 4-wheel forklift

Jungheinrich EFG430

Condition: used, functionality: fully functional, Year of construction: 2021, load capacity: 3,000 kg, Fork carriage ISO class: ISO class 3 = 2,500 - 4,999 kg Ndedpjt S Rv Dofx Ah Ujf Condition: Ready for use and fully functional Technical condition: Very good Description: Mast type Triplex EFG 425-430 Carriage class 3A (51 cm) Width 1120 mm Inside dimension 415 mm Outside dimension 475 mm Height 635 mm ID OS975

Condition: new, empty load weight: 10,000 kg, maximum load weight: 41,600 kg, overall weight: 51,600 kg, axle configuration: 3 axles, loading space length: 13,600 mm, loading space width: 2,540 mm, suspension: air, tire size: 235/75 R 17,5, color: grey, Equipment: ABS, Loading area: -Gooseneck, length approx. 4,100 mm with central support -Loading area in extendable design, length approx. 9,500 mm with bevel at the rear approx. 350 mm x 10° and integrated hanging bar for attaching loose aluminum loading ramps -Pneumatic locking with conical locking bolts and reinforced locking positions -The supply lines are protected in the extendable supports and automatically adjust to the respective loading area length Axles, suspension and tires: -BPW axles and suspension, all axles hydro-mechanically forced steered -Mounted on a turntable -Technical axle load: 12,000 kg Ndsdpfx Ahjiuy Nle Ujf -Air suspension with raising and lowering valve -Tires 235/75 R17.5 twin tires Paint: -6-K final treatment -Complete Steel construction shot blasted after welding -One layer of zinc-based base paint, one layer of primer -Final coating with 2 layers of 2-component paint (acrylic) in one color in MB 7350 Nova gray, then sealing of the cavities with special wax Steel construction: -Steel construction made of high-strength fine-grain steel -Steel qualities: -S355J2+N/S355MC (yield strength 355MPa) -S690QL/S700MC (yield strength 690MPa) -Welder tested according to DIN-EN 287-1 -MAG welding process according to EN ISO 4063, M21 protective gas according to EN ISO 14175 Accessories: -Front wall made of steel, approx. 1,600 mm high -Round NATO socket on the front connection strip -3 kW electro-hydraulic unit for controlling the Hydraulic processes -4 pairs of recessed lashing rings in the outer frame of the gooseneck -4 pairs of stake pockets embedded in the outer frame of the gooseneck, for stakes approx. 100x50 mm -1 stake pocket strip mounted transversely in the loading floor of the gooseneck, for stakes approx. 100x50 mm (1x at the back of the gooseneck) -2" king pins -Mechanical seat supports with 2-speed gearbox and crank -JOST module B - static test load = 50,000 kg -Approx. 32 mm wooden floor on the gooseneck and the loading area, framed in ALU omega profiles -A locking point on the extension, approx. every 500 mm -10 pairs of recessed lashing rings lying in the outer frame of the loading area, foldable outwards -6 pairs of stake pockets embedded in the outer frame of the loading area, for stakes approx. 100x50 mm -2 stake pocket strips mounted across the loading floor of the loading area, for stakes approx. 100x50 mm -Inox toolbox approx. 1,250 x 500 x 550 mm -Bevel on the vehicle's end crossbar, approx. 350 mm 10° -Integrated hanging strip for loose aluminum docking ramps on the vehicle's end crossbar -1 pair of downpipe supports on the end crossbar -Fenders on all axles -Central lubrication system with 1 pump -Steering can be operated from the front and rear using a cable remote control via push button, with alignment control of the axles -Under the gooseneck and at the back of the end crossbar, a 7-pin socket for warning signs on the left and right -A 7-pin socket on the end crossbar -Container locks "TWIST-LOCKS" in the loading area for transporting 2x 20ft - and 1x 40ft containers -Radio remote control for the steering in addition to the cable remote control, with 2 indicator lights on the receiver as a lane control -2 axle load gauges + axle load diagram -4 warning signs approx. 423 x 423 mm extendable by approx. 400 mm -Standard HRM metallization (High Resistance Metallization) of the outer frame -Complete steel construction shot blasted, then the defined visible surfaces are hot-finished in metallization with ZINACOR 850 (zinc 85% -

Condition: excellent (used), machine/vehicle number: FN541303, Year of construction: 2017, operating hours: 6,141 h, lifting height: 3,100 mm, fuel type: electric, mast type: duplex, battery capacity: 620 Ah, battery voltage: 80 V, fork length: 1,150 mm, Lifting capacity: 3.000 kg Technical condition: very good Visual appearance: very good Nedpex Ib E Rjfx Ah Ujdf Please contact PEDRO GÓMEZ for more information

Condition: used, functionality: fully functional, machine/vehicle number: FN5095.., Year of construction: 2016, operating hours: 3,382 h, load capacity: 3,000 kg, lifting height: 5,500 mm, free lift: 1,600 mm, fuel type: electric, mast type: triplex, construction height: 2,490 mm, empty load weight: 5,814 kg, drive type: Elektro, Electric 4-wheel forklift Chassis number: FN5095.. Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tires type: Superelastic Front tires condition: 20 - 40% Rear tires type: Superelastic Rear tires condition: 20 - 40% Battery voltage: 80V Battery capacity: 775Ah Battery manufacturer: JH Battery type: PzS Ndodpfevxxq Tsx Ah Uef Battery year of construction: 2016 Battery condition: 60 - 80% Sideshifter, SE tires black, not white as shown in the pictures! 3rd valve, 4th valve, rear working lights, front working lights, roof cover, front windshield, half-cab, full free lift,

Condition: new, overall weight: 22,000 kg, axle configuration: 1 axle, loading space length: 11,105 mm, loading space width: 2,480 mm, loading space height: 2,680 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2025, Equipment: ABS, PRSSQTri 09-SYS with body, single axle, tail lift Twin tyres 22.5 TRIDEC ---- Curtainsider body, side height 2,600 mm from loading floor to lower edge of outer rail Steering angle max. 31° Mechanical steering system with 1 drag link for steering one axle Chassis width approx. 2,480 mm Fifth wheel load max. approx. 12,000 kg Landing leg position approx. 2,300 mm from kingpin Chassis length approx. 11,105 mm Axle loads: 10,000 kg Unladen ride height approx. 1,300 mm with a fifth wheel height of 1,150 mm Approval with COC documents ?Outer frame height approx. 125 mm, with groove for lashing rings, base thickness approx. 4 mm, with lashing holes on the outside 11 pairs of lashing rings in the outer frame (tested lashing force 5 t per lashing point) 24 t telescopic support winch Axle Free choice of axle brand by WEB Trailers (SAF/BPW/Jost) Axle with large disc brake Axle 10 t disc 22.5” twin tyres Air suspension unit, each 10 t Lifting and lowering device Red and yellow coupling heads Lifting and lowering device mounted on the rear right in driving direction Air tanks 2 x approx. 80 l in steel, painted black EBS brake system, Knorr or Wabco brand including RSS Tyre pressure monitoring system 4 branded tyres 275/70 R 22.5, major brand on steel rims (brand choice by WEB Trailer) Tail Lift Platform with anti-roll-off protection Platform steel - checker plate Front connection for tail lift as REMA socket (without batteries! opt.) Tail lift according to our choice 2.5 t Documentation, manual, etc. Operation via control box at the rear right and via remote control with spiral cable located inside upper right Platform height approx. 2,000 mm (standard, can be closed at the rear) Indicator lights on the tail lift platform Protection and reverse polarity protection on positive and negative cables (red + blue) Tail lift brand by WEB Trailer, customer choice Body certificate according to DIN EN 12642 XL (for 27 t payload + tail lift) with at least 2 rows of wooden slats with top platform lock Contour marking on curtains and rear portal ECE signs on tail lift Rear upper position lights in red (LED) Sliding roof fixed at rear Top flap for the tail lift with gas struts Front and lower position lights in white with reflectors (LED) 3 sets of side curtainsliders manufacturer by choice WEB Front wall standard steel with 400 mm steel cassettes Inner wear plate approx. 2.40 m max. 3 rows of wooden slats Lighting system 24 Volt LED with small multifunction rear lamp 15-pin connector Flashing side marker lights Reinforced roof tarpaulin with 12x12 roof fabric Tensioning ratchet at the rear, release mechanism at the front only 2 steel bump stops at the rear corners Plastic fenders, 180 degrees Antispray mud flaps Side underrun protection on both sides, aluminium, steel profile or plastic Body certificate according to DIN EN 12642 XL Coating/Paint: Frame painted in RAL 9005 or Novagrau 7350, other colours available at extra cost and subject to powder coating availability KTL coating with zinc phosphating plus powder, highest corrosion protection Hot-dip galvanisation available as an option Body colour in RAL of your choice Approval: COC Ex works price Ndsdpjg Dkyqsfx Ah Uof Please note! Pictures show optional equipment Allow us to advise you and prepare a free, no-obligation quote. Leasing, financing or hire purchase possible! We can accommodate your requirements! Contact us—we are happy to provide you with an offer. All information subject to change and prior sale!

Condition: used, functionality: fully functional, machine/vehicle number: FN482499, Year of construction: 2014, operating hours: 26,597 h, lifting height: 3,270 mm, free lift: 1,460 mm, fuel type: electric, mast type: duplex, construction height: 2,330 mm, fork length: 2,340 mm, drive type: Elektro, Electric 4-Wheel Forklift VIN: FN482499 Mast Type: Duplex Condition: Ready for use and fully functional Technical Condition: Good Description: Jungheinrich EFG 430 No.: R0372 Year of Manufacture: 2014 Operating Hours: 26,597 The unit is visually in normal and technically in good condition. Charger available upon request. Fast and uncomplicated transport is available upon request! This listing is for identification purposes only! A detailed description of the condition and possible equipment is provided individually upon request! Errors and prior sale excepted. Sale to businesses only. All sales of used goods are subject to warranty and/or guarantee. If you haven't found the forklift you're looking for, please contact us. We have a large selection of other equipment on site. Sideshift, fork positioner, 3rd valve, 4th valve, Ndodpfeuhwwfox Ah Uef

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 6,627 h, load capacity: 3,000 kg, lifting height: 7,000 mm, free lift: 1,500 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Triplex Condition: Ready for use and fully functional Technical condition: good Ndsdpfx Ahjxlluhj Ujf Battery Volt: 80V Battery Ah: 620Ah Battery year of construction: 2022 Sideshift, Fork positioner, 3rd valve, 4th valve, Heating, Full cab,

Year of construction: 2025, condition: new, GSL - Slow speed granulator GSL 300 Rotor diameter (mm) 300 Rotor width (mm) 600 Rotor speed (rpm) 150 Drive capacity (kW) 11 Rotor knives (pcs) 48 Stator blades (rows) 2 Nsdpoi Hpf Nefx Ah Uedf Screen size (mm) > 6 Weight approx. (kg) 950 The slow speed granulators in the GSL range are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. The machines can be used for rejected products in the inline recycling process as well. Different hopper and base frame designs make it possible to integrate the machine with most types of injection molding machines and robots. Driven by gear motor Unique knife design eliminates adjustment after resharpening. Simple tool less access for maintenance and cleaning Customizable hopper and base frame The slow speed granulators in the GSL 300 range feature a staggered 300 mm diameter rotor with widths ranging from 400 to 800 mm. The rotor is directly driven by a geared motor. The low rotor speed reduces the noise level of the machine and creates less dust while grinding. The special design knives of the GSL series can be sharpened easily and do not need adjustment afterwards. The material is fed via a sound absorbing feed hopper that can be tailored to fit various applications and feeding ways. Depending on the requirements the machines can be fitted with a wide variety of hoppers, they are mounted on either low or high level base frames with matching suction bins or bag filling adapters. Quick snap fasteners and hand screws make access to the machine for cleaning and maintenance fast and easy. Applications The GSL slow speed granulators of the 300 series are mainly used in injection and blow molding processes as beside the press machines to grind runners and sprues. But they can be used as low noise central granulators for small throughput requirements as well. The stronger design of the 300 series GSLs allow them to be used for stronger and thicker materials while offering the same advantages regarding low noise and dust as the smaller GSL machines. All GSL models can be equipped with a built in blower system in case a vacuum loading system is not available, or to transport the ground material to bags for storage.

Condition: used, Year of construction: 2010, lifting height: 4,100 mm, fuel type: electric, mast type: simplex, construction height: 2,650 mm, Year of construction: 2010 Field of application: Internal logistics Ndedsx Hlbyjpfx Ah Usf

Condition: used, functionality: fully functional, Year of construction: 2014, operating hours: 9,679 h, load capacity: 3,000 kg, lifting height: 5,000 mm, free lift: 1,550 mm, fuel type: electric, mast type: triplex, construction height: 2,287 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Nedpfx Ahex N Aa Ss Uodf Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Side shifter, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 8,003 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,150 mm, fuel type: electric, mast type: triplex, construction height: 2,887 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Njdpfxex Nz Sme Ah Usdf Battery voltage: 80V Side shifter, 3rd valve,

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 9,902 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,150 mm, fuel type: electric, mast type: triplex, construction height: 2,887 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Battery voltage: 80V Side shifter, 3rd valve, Nsdpfex Nz Sgsx Ah Ujdf

Condition: used, functionality: fully functional, Year of construction: 2016, operating hours: 6,653 h, load capacity: 3,000 kg, lifting height: 6,500 mm, free lift: 2,150 mm, fuel type: electric, mast type: triplex, construction height: 2,887 mm, drive type: Elektro, Electric 4-wheel forklift ISO Class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: good Ndodpfjx Nz Saex Ah Uof Battery voltage: 80V Side shifter, 3rd valve,