|
3
x-axis: 4000 mm
y-axis: 1250 mm
z-axis: 1250 mm
distance between columns: 1450 mm
Passage height: 1300 mm
repeating accuracy: +/- 0,03 mm
speed: 28 m/min
2rh9gy
spindle head swivable left - right: °
control:
number of spindle speeds: U/min.
feed:: m/min.
feed:: m/min.
feed:: m/min.
tool changer with:
tool clamping:
interface:
table-size: mm
air-pressure connection: bar
total power requirement: ca. 140 kW
weight of the machine ca.: 35 t
dimensions of machine: m
dimensions electric cabinet LxW... more
|
|
2
Hydraulic feed for planing
Manual swiveling possibility of a gear motor for module bar feed
for milling.
4 planing supports and separate milling skids
The machine is in very good condition.
The 4 supports, the bed tracks, the stands and the crossbeam were built in Oct.
1996 overhauled. The table is already coated with Teflon.
the 40 kW futurilla milling head is included, the associated control cabinets
also. A newly purchased milling head and motor are enclosed.
Planer length = table span leng... more
|
|
6
x-travel 8000 mm
y-travel 2500 mm
workpiece height 2360 mm
Benjjmq88d
table width 2240 mm
table length 10100 mm
weight of the machine ca. 110 t
dimensions of the machine ca. 20x8,5x5,2 m more
|
|
3
GO 1984
Length of the table: 3000 mm
Width of the table: 1100 mm
Distance between frames: 520 mm
Total power demand: 45 kW
Planing width: 1250 mm
Planing length: 3000-10000 mm
Planing height: 1230 mm
Rapid traverse: 930 mm/min
G9nse9
Machine weight: 20 t
Vybavení:
Grinding headstock more
|
|
8
1974
used
x-travel 0000 mm
y-travel 0000 mm
z-travel 0000 mm
total power requirement kW
weight of the machine ca. 0,30 t
dimensions of the machine ca. m
This is a curve planer JOPP KH250 with curve generator
JOCAMAT for the production of curves for cam-controlled lathes.
Largest producible flat curve diameter approx. 300mm
Largest manufacturable bell curve diameter about 200mm
Diameter of the spindles about 20mm
Largest curve angle that can be produced in one turn approx. 300 degrees (82 degrees)
Ma... more
|
|
5
1988
ready for operation (used)
General Data
Measurements width 2530 mm
Measurements depth 2340 mm
Measurements height 2500 mm
Machine weight 4900 kg
Nscxf
Workpiece
Workpiece drm 160 mm
Media
Power consumption 12,5 kVA
This TOS OHA 16B Shaping Machine was built in 1988 in Czech Republic. This machine can works with a gear cutting of 20 - 160 mm external, and 160 mm internal. During the past, this machine has been producing gear part.
Application Types
Shaping more
|
|
3
used
Short Hobler, quick Hobler, Planer, Schepping, slotting machine
-T - slot table for multiple tools
8zehpx
Tool changer
Chisel holder
Price complete
-only sold
Weight 34 kg more
|
|
9
GR: 1975
Technical parameters:
Planing width: 1250 mm
Planing length: 3000 - 12 000
0ti77eun
Planing height: 1250 mm
Table clamping surface: 1100x3000x12000 mm
Maximum table load per 1m planing length:
- at table speeds up to 40 m / min: 2000 kp
- at table speeds from 40 to 80 m / min: 1000 kp
Power of table motor: 45 kW
Supports displacements on crossbar mm / stroke: 0.25-20
Side support displacements mm / stroke: 0.125-10
Feed slide travel mm / stroke: 0.12-10
Ground plan of the machine (p... more
|
|
7
good (used)
Table size: 2000 x 650 mm
Sur92uqx
Plane length: 1700 mm
Planing width: 600 mm
Space requirement approx. Lxwxh: 2600 x 1 800 x 2400 mm more
|
|
SNK RB 2N Bridge Type Plano Mill
New Heidenhain 560 CNC Control fitted in 2017
X Axis Travel - 2743.20mm
Bffakjfua9
Y Axis Travel - 1600.20mm
Z Axis Travel - 899.16mm
Distance between columns - 1676.40mm
Table Size - 1200mm width x 2800mm length
Spindle Motor - 22.37kw
Spindle Speeds - 30 - 2000 RPM
Spindle Taper - No. 50int
Complete with double swivel milling head more
|
|
5
ready for operation (used)
Shaping brand Arietemax stroke 600mmWeight ca1500 kg incl. vise
Minkt8nx more
|
|
7
Lift length: 375 mm
X-axis: 510 mm
Z axis: 220 mm
Table size LxBxH, approx: 350 x 315 x 315 mm
Engine power:: 1.1/1.25 kW
Connection: 400 V
Dimensions LxBxH, about: 1550 x 1200 x 1320 mm
Weight, about: 890 kg
Cibbancw
Facilities:
-Screw stick with 160 mm baking width, opening width: 150 mm
Article 0320207 more
|
|
11
- Machine is ready for operation - Machine is under power - Inspection by arrangement is possible at any timeType: HZS 2000 x 6000/4Manufacturer: WMWCondition: used, fully functionalBuilt year: 1986Thru width:2000 mmThru height:1800 mmHobell length:6000 mm
Cxogabf more
|
|
2
1 bum. Stand long planer, Fabr. Waldrich Coburg, Type 3E1915, Y.O.M. 1955
Planing length 4000 mm
Clvimzz3 more
|
|
3
Quick planing machine Fabr.KLOPP Type:550 My.1979
Stroke 550mm with machine vice.
Nm2kj
In very good condition. more
|
|
6
Hydr. Once change Planer Fabr. WALDRICH COBURG type 2E 1515
KOM.# 2110108 built in 1966
combined Portal planer and milling machine with detachable milling attachment
Technical data:
Planing length 2000 mm
Planing width 900 mm
Planing height 750 mm
Table area 2000 x 650 mm
Max. Work-piece weight 1550 kg milling head 11 spindle speeds 112-1120 RPM
Power 1,5 kW
Speed 960 RPM.
Tool holder MK 3
maximum cutter diameter 63 mm
Axial adjustment of the milling head 130 mm
Vertical adjustment 170 mm
Adjus... more
|
|
6
good (used)
Forges de Gilly shaping machine offered.
Bepqaja39m
Speed: 15-170 strokes/min
Table: 350 x 520 mm
Dimensions: 185x115x145 cm (LxWxH)
For more information call us or send an e-mail. more
|
Buyers can restrict the circle of potential business partners without extensive checks and favor companies that make honest and righteous shops with high probability.
Of course, disagreements can still arise during the purchasing process. Maschinensucher resp. the Machineseeker Group GmbH is not liable for legal infringements of the buyer resp. seller active on Maschinesucher resp. Machineseeker.
There is no right to the grant of the Machineseeker trust seal. In addition, the seal can be removed.
