LPG Forklifts

Jungheinrich TFG435S

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,965 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,550 mm, fuel type: gas, mast type: triplex, construction height: 2,260 mm, fork carriage width: 1,100 mm, fork length: 1,200 mm, empty load weight: 5,024 kg, drive type: Treibgas, Internal combustion forklift Load center: 500 ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Transmission: Hydrostatic drive Condition: Ready for use and fully functional Technical condition: very good Front tire type: Superelastic Front tire size: 27x10-12 Rear tire type: Superelastic Rear tire size: 6.50-10 Description: In addition to this unit, we offer other forklifts and warehouse equipment. Our equipment is workshop-tested and FEM4.004 certified. Please contact us by email or by phone. You can also find us at hsr-gabelstapler. We also buy your used forklifts, even if you do not purchase a vehicle from us. Lease purchase and financing options are available upon request at favorable terms. We will gladly provide you with competent and detailed advice on our vehicles. Dwjdpfjzzgm Dex Aggob 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, full free lift, interior mirror, joystick, single-pedal control, LED, seat.

Condition: excellent (used), travel distance X-axis: 1,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 750 mm, table width: 1,500 mm, table length: 850 mm, rotational speed (max.): 2,500 rpm, quill stroke: 120 mm, SHW UF 5 Travels - X-axis (rotary table): 1,500 mm - Y-axis (vertical headstock): 1,000 mm - Z-axis (horizontal headstock): 750 mm Control system - CNC control: Heidenhain TNC 355 Automatic swivel head (change between horizontal and vertical machining) Quill 120mm Milling spindle holder SK 50 Speed 2500 rpm Partial overhaul 2014 - Year of construction 1990 - Inspection/repair 2025 Table assembly - Travel distance: X = 1,500 mm - Clamping surface: 1,500 x 800 mm Chip conveyor Splash guard cabin We have ALL spare parts for this series (SHW UF 5) in stock! About us: MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is in the field of tool milling machines. Our services include spare parts deliveries, on-site customer service, machine overhauls and control system modernizations. Services: - Used machines - Spare parts - Customer service - Machine service - Machine overhauls - Control modernization Dwedpjvfm I Tjfx Aggeb _____ Used machine - used milling machine - used bed type milling machine - orthogonal milling head - metalworking - tool milling machine - milling head - SHW machine - SHW spare parts - milling machine used - milling machine used - CNC milling machine used - drilling milling machine used - milling machine metal used - metal milling machine used - metal milling machine used metal milling machine used - used cnc milling machine - cnc milling machines - cnc milling machines - milling machine - large part machining - large part machining - large part machining - cnc large part machining - milling - shw - uf5 - uf 5 - Uniforce - SHW UF - SHW Uniforce - SHW Uniforce 5 - UFZ 5 - UFZ5L - UFZ 5 L - MBM Milling Machine - MBM Machine

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 8,266 h, load capacity: 3,500 kg, lifting height: 4,800 mm, fuel type: gas, mast type: simplex, construction height: 3,228 mm, drive type: Treibgas, LPG forklift ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Standard Dwodpfx Ajzvttmeggeb Condition: Ready for use and fully functional Technical condition: good 3rd valve, 4th valve,

Condition: excellent (used), functionality: fully functional, machine/vehicle number: FN564807, Year of construction: 2018, load capacity: 3,500 kg, lifting height: 6,050 mm, free lift: 2,200 mm, fuel type: gas, mast type: triplex, construction height: 2,800 mm, power: 38 kW (51.67 HP), motor manufacturer: VW, gearing type: hydrostat, empty load weight: 5,627 kg, color: yellow, Equipment: adjustable boom, cabin, lighting, pallet forks, sideshift, trailer coupling, We are happy to provide you with a financing or hire purchase offer. Technically and visually in excellent condition. By arrangement, we can perform a new UVV inspection, service, etc. Dwodpfx Agszu Aamegjb Transport can be organized Europe-wide. No guarantee for errors.

Condition: good (used), Year of construction: 1980, turning diameter over bed slide: 1,040 mm, turning diameter over top slide: 710 mm, turning length: 2,000 mm, bed width: 600 mm, Optional chuck 1200 mm 2 Axis RSF Digital read out Conical turning attachment Spindle bore 130 mm Central lubrication DBC Turning Length: 2000mm Swing over bed Ø: 1040mm Swing over cross slide Ø:710mm Swing in the gap Ø: 1780mm Gap length: 1000mm Spindle bore: 130mm Bed width: 600mm Tailstock spindle Ø: 130Ø Stroke pinole: 300mm Spindle taper: 6Mk Power: 22kW Dodpfjx Tgr Tjx Aggowb Speeds / ranges: 600Rpm Feed rate X-Axis: 4000mm/min. Feed rate Z-Axis: 4000mm/min. Length: 6000mm Width: 2100mm Height: 2100mm Weight: 8300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, functionality: fully functional, Year of construction: 2018, operating hours: 5,368 h, load capacity: 3,500 kg, lifting height: 4,700 mm, free lift: 1,501 mm, fuel type: gas, mast type: triplex, construction height: 2,270 mm, power: 38 kW (51.67 HP), fork carriage width: 1,090 mm, fork length: 1,100 mm, empty load weight: 5,232 kg, total length: 2,813 mm, drive type: Treibgas, construction width: 1,320 mm, Internal combustion forklift Load center: 500 Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO Class 3 = 2,500 - 4,999 kg Mast type: Triplex Technical condition: very good Front tire type: Superelastic Front tire size: 27x10-12 Front tire condition: 40 - 60% Rear tire type: Superelastic Rear tire size: 6.50-10 Rear tire condition: 40 - 60% Description: Inspection + safety check completed Dwodpfjzkcmrsx Aggjb Side shifter, fork positioner 3rd valve, 4th valve, front work light, roof protection, windshield, half-cab, heater, load guard, STVZO compliant, full cab, full free lift, safety light, safety pilot, joystick, single-pedal operation, LED, 1-pedal operation, joystick (solo pilot), multi-color display, comfort seat, rear floor spot light, strobe light, reversing warning device.

Condition: used, Year of construction: 2009, x-travel 835 mm y-travel 510 mm z-travel 510 mm CNC-control iTNC530 HEIDENHAIN table-size 1000 x 560 mm max. table load 800 kg spindle taper SK 40 spindle turning speed range 20 - 14.000 U/min feed stepless 1 - 20.000 mm/min rapid traverse 20 m/min Dodpfxjy Ty A Sj Aggewb drive capacity - spindle motor 13 / 9 kW tool change unit 32 Pos coolant IKZ 25 bar voltage 400 V total power requirement 30 kVA weight of the machine ca. 4,5 t dimensions of the machine ca. 2,25 x 3,20 x 2,30 m chip conveyor 3,50 x 0,85 x 1,55 m coolant equipment 1,40 x 1,60 x 1,80 m spindle oil cooler 0,40 x 0,50 x 1,00 m - Serial-No.: 15415041384 - Machine ON: 72,882 h - Program Run: 25.267 h - control: HEIDENHAIN iTNC 530 - Linear scales in all 3 axis - electr. handwheel - Tool changer 30 pos. with double gripper - Chip conveyor - TSC with belt filter system - Coolant unit - new ball screw incl. bearings (X-Axis)

Condition: good (used), Year of construction: 1991, x-travel 4000 mm y-travel 2500 mm z-travel 1200 mm Control FIDIA M30 spindle 37 kW turning speeds 4500 U/min column daylight 2300 mm Dwsdjvwgmgopfx Aggeb dist. milling spindle - table surface 1250 mm taper ISO SK-50 table dimension - longitudinal 3000 mm table dimension - cross 1500 mm The Ingersoll-Bohle 5-axis portal milling machine is in good condition and can be can be inspected by arrangement with the seller. Accessories: - High-frequency high-speed spindle 3.8 kW with 25,000 rpm. Description: - infinitely adjustable inclined axis milling head (speed 4500 rpm)

Condition: good (used), Year of construction: 1999, functionality: fully functional, turning length: 3,000 mm, turning diameter: 1,000 mm, spindle bore: 197 mm, Upon request, videos of the machine in operation can also be provided. Maximum turning length: 6000 mm Dwedpfx Agsyr N N Rsgjb Turning diameter: over cross slide: 1000 mm over bed: 1250 mm Spindle bore: 197 mm Spindle speeds: 0 – 665 rpm Faceplate diameter: 1200 mm Workpiece weight: 15000 kg between centers Motor power: 55 kW / 74 hp 3 gear stages: 1.5-55 / 50-180 / 180-665 rpm Accessories: Sauter 4-position tool turret (rotation defective) Tailstock (hydraulics partially defective, pressure loss) Chip conveyor 2 chip guard doors (incl. safety device) 4-way bed machine (flat bed) LED lighting

Condition: used, Year of construction: 2021, turning diameter over bed 0800 mm turning diameter over slide rest 500 mm turning length 4000 mm spindle bore 105 mm spindle turning speed range 5,4 - 720 U/min Dwsdpfx Agey Nd Sisgeb workpiece weight 2500 kg bed width 600 mm spindle bore 105 mm longitudinal feeds: 0,05- 24,3 mm/U cross feed 0,05 - 12,15 mm/U rapid traverse 4 m/min main drive 11 kW total power requirement 14 kW weight of the machine ca. 8 t dimensions of the machine ca. 6,5 x 2,5 x 2 m With 4 position tool holder, face plate with safety cover, steady rest and DRO.