Used Welter for sale (8)

Condition: used, max. wheel diameter 1800 mm gear width 725 mm max. module 5 Control Siemens 840D sl axial travel 725 mm turning speed range - stepless 44 - 440 U/min cutter diameter max. 240 mm cutter width - max. 300 mm table diameter 1500 mm boring diameter 350 mm weight of the machine ca. 27 t dimensions of the machine ca. 8,8 x 6,1 x 3,25 m Equipment / Accessories: - max. distance from clamping table to counterholder/to center of milling spindle: 1045 mm - milling spindle: - max. axis distance between milling spindle and clamping spindle with/without counterholder: 1200 mm - min. axis distance between milling spindle and clamping spindle with/without counterholder: 525 mm - quick cutter change device - chip extraction device - milling arbors Pgsdpjvylirofx Ah Aou - documentation

Condition: used, functionality: fully functional, The bevel gear testing machine Gleason-Welter 2000 T was designed as a universal machine and is used by manufacturers of gears and transmission technologies for the single flank rolling test process of bevel and crown gears. Technical Data Diameter: 2000 mm Spindle bore: 310/250 mm Test speed: 5-100 rpm Dimensions: approx. 4,200 x 4,500 x 2,300 m Machine weight: approx.12,500 kg *Specifications and data are non-binding, subject to prior sale Special Features: Angle-hypoid test device, suitable for testing larger sizes of bevel and hypoid gears with a diameter of up to 2,000 mm and shaft angles from 0 to 360 degrees, as well as straight, helical, and internal gearing. Deviations in gear geometry, machining errors through defective tools, as well as damage to the gears, can thus be identified and eliminated before assembly. The following parameters can be measured here: - Single flank rolling deviation Fi', fi', fl', fk' - Pitch deviations Fp, fp, fu - Runout and roundness - Runout error Fr Pgjdpjwn D Uhofx Ah Aeu - Backlash - FFT analysis For technical questions and further information, you can contact us at any time.

Condition: used, The Klingelnberg GKP 90 bevel gear testing machine was designed as a universal machine and is used by manufacturers of gears and transmission technologies for noise and contact pattern testing on bevel and hypoid gears. Technical Data • Diameter: 540 (400) mm • Hypoid: ±50 mm • Pinion spindle diameter: 90 mm • Dimensions (LxWxH): 1,800 x 1,800 x 1,600 mm • Machine weight: approx. 2,800 kg *Information and data are provided without obligation. Subject to prior sale. Special Features: Podpfxoxpq Nle Ah Aegu The machine is intended for noise and contact pattern testing on bevel and hypoid gears of all gear types. By simulating operational conditions, applying various rotational speeds, and switching load states between drive and coast, the optimal installation distance for standstill can be determined. • Digital actual value display for 2 axes • Infinitely variable speed adjustment via frequency inverter • Electrically secured and removable safety guard • Accessories: Large number of workpiece holders • Condition: Very good

Condition: good (used), functionality: fully functional, The Höfler Helix 400 gear grinding machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the profile grinding of gears. Special features: Ideal machine for one-off production and small batches Technical data Wheel diameter: 400 mm Module - max.: 0.75-10 Pedpfx Aovd Ehpsh Aogu Tooth width: 200 mm Space requirement approx.: 3.0 x 4.5 x 2.5 mm Machine weight approx.: 8,500 kg *The illustration shows the machine in its current condition as a used machine and can be offered partially modernized or as a retrofit with new CNC control (Siemens ONE) and acceptance according to the manufacturer's standard on request.

Condition: excellent (used), The HURTH MODUL ZSTK 251 bevel gear planing machine was designed as a special machine and is used by manufacturers of drive systems in the drive technology, automotive, agricultural machinery, machine tools, mining technology, aviation and textile machinery sectors for the gear shaping of straight-toothed bevel gears with a short run-out. We still have 1 of these machines in stock, which, in conjunction with the Klingelnberg BF 203 bevel gear milling machine, can also produce crowned bevel gear sets in high quality. Technical data Workpiece diameter: 315 mm Module max.: 10 mm Tooth width: 45 mm Dimensions: 2.7 x 2.3 x 2.1 m Weight: 7,000 kg *Information and data are non-binding and subject to prior sale Pedpfx Aeup T Rlsh Aegu Viewing under operating conditions possible after consultation.

Condition: ready for operation (used), The Klingelnberg KNC 60 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used by manufacturers of gear and transmission technologies for the process of milling spiral-toothed bevel gear sets. Technical data Klingelnberg KNC 60 CNC Wheel diameter - max 650 mm Largest tooth width 120 mm Module 2.2-12 mm Number of teeth 5-120 Hypoid offset +/- 100 mm Pgsdpevyd Ndsfx Ah Aou Usable cutter head radii 55, 100, 135, 170, 210 mm Machine weight Approx. 16,000 kg Dimensions (L x W x H) 5750 x 2800 x 2700 mm *Image shows the machine in its current condition as a used machine and can be offered on request, partially modernized, or as a retrofit completely modernized with a new CNC control (SIEMENS ONE).

Condition: good (used), The Klingelnberg BF 203 bevel gear milling machine was designed as a universal machine for the flexible machining of gears and is used for milling straight-toothed bevel gears. Image shows the machine in its current condition as a used machine. Performance description: Wheel diameter: 240 mm Module - max.: 10 Tooth width: 60 mm Space requirement approx.: 2.3 x 2 x 1.7 mm Machine weight approx.: 6,700 kg Pgodpfslxzmiox Ah Aou Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to advance sales

Condition: refurbished (used), functionality: fully functional, The Klingelnberg PKE 300 H (PSKE 900) bevel gear testing machine was designed as a universal machine for the flexible machining of gears and is used for single flank rolling tests on bevel gears with evaluation Picture shows machine in actual condition as retrofit / modernized. Pgsdpfetncnhex Ah Asu Performance description: Wheel diameter: 450 (300) mm Axle angle: 90 degrees Hypoid: +/- 60 mm Space requirement approx.: 1.4 x 0.8 x 1.5 mm Machine weight approx.: 1,100 kg Further information on possible options, current purchase price on request. *Information, dates are non-binding, subject to prior sale