Screw compressor

KAESER AS 36

Year of construction: 2008, condition: good (used), Complete compressor and air station Manufacturer: KAESER Models: AS 36 / TC 31 Year : 2008 Working pressure 7,5 bar Gsdpogw Diaofx Af Tsua

Condition: new, Year of construction: 2026, Engine power 5HP Blade diameter 250mm Blade revolutions per (min) 5300 Automatic pneumatic movable table Galvanized iron and polyzene supports √ Maximum horizontal cutting length 4200mm Maximum vertical cutting height 2200mm Guedju Rqq Hopfx Af Tja Maximum horizontal cutting height 2080mm Maximum cutting depth 60mm

Condition: used, Compressor KAESER AS36 Gjdsxbty Djpfx Af Tsua

Year of construction: 2020, condition: ready for operation (used), A Rico compressor system consisting of two Atlas Copco compressors, two refrigerant dryers and an Atlas Copco Beko oil-water separation system is available. Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air volume flow: 9.4m³/min, operating pressure: 13bar, motor power: 45kW, motor speed: 4500rpm, machine dimensions X/Y/Z: approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45kW, operating pressure: 18.5bar, speed: 3000rpm. 2x refrigerant air dryers Atlas Copco FX 15, air volume flow: 15m³/min, operating overpressure: 13bar, pressure drop: approx. 0.3bar, refrigerant: R410A, refrigerant charge: 2050g, max. inlet air temperature: 60°C, machine dimensions X/Y/Z: approx. 900mm/750mm/1000mm, weight: approx. 160kg. Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control range: 2-6 compressors. Oil-water separation system Beko ÖWAMAT 15, throughput range: 6m³-30m³/min, oil outlet: DN40, container volume: 115.5l, filling volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16bar, machine dimensions X/Y/Z: approx. 1100mm/550mm/800mm, weight: approx. 40kg. System operating hours: 8656h, controller hours: 42334h. Documentation available. An on-site inspection is possible. Guedpfx Afjxdc Uvo Tea

Condition: excellent (used), functionality: fully functional, SURFACE PLANER model SCM F 520 second hand machine n.4 knives Tersa length of ground surfaces: 3000 mm Gusdpfx Aswt T Hdof Tea hydraulic foot pedal lift volts: 380/50 Other models available as shown in the photos second hand machines

Condition: excellent (used), Year of construction: 1988, functionality: limited functionality, machine/vehicle number: 25.05.004, total length: 9,500 mm, total width: 2,250 mm, total height: 2,300 mm, input voltage: 380 V, power: 50 kW (67.98 HP), overall weight: 21,000 kg, empty load weight: 18,000 kg, compressed air connection: 7 bar, Equipment: documentation/manual, Paper size: 730 x 1060 mm, printing area: 710 x 1040 mm Paper thickness: 0.05 mm – 0.5 mm Preset maximum speed (due to simulation of the throw-off time for high-speed presses) is 4,000 sheets per hour, but the machine can operate much faster for commercial jobs. Four-fold central impression cylinder that prints all 4 colors in one gripper closure. 1988 FAG Speedproof with operator console for ink duct and cylinder adjustments, enabling extremely accurate register printing. Attached is the original factory brochure. The machine has been fully dry ice cleaned, and the cylinders are in excellent condition. Offered strictly on an 'as is, where is' basis. Maximum width is 225 cm, maximum height is 230 cm; shipping in a High Cube container is possible. Price is absolutely fixed, based on the removal of easily separated parts which we could sell separately, such as the Mabeg feeder with vacuum belt delivery, and the four-fold Baldwin stainless steel unit—with each color having its own bath, a mixer, and adjustable temperature control, so all four baths can be set to different temperatures and alcohol concentrations. The machine was dry ice cleaned, and it was intended for prominent use in printing electronic paper. However, due to too many initial losses, the project was discontinued. The machine has been with us for 3 years and, due to its size, I want to sell it as quickly as possible. Hence this very low price. It is an excellent machine. If the machine needs to be set up for testing and sampling, this is possible at an additional cost of €10,000, of which €5,000 must be paid in advance as a deposit under agreed conditions. All relevant information can be found in the original FAG folder for the machine, available via this advertisement as a PDF. Technical Data - Printing size max.: 710 × 1040 mm (27.95 × 40.94 in.) - Paper size max.: 730 × 1060 mm (28.74 × 41.73 in.) - Paper size min.: 500 × 700 mm (19.68 × 27.56 in.) - Stock thickness: 0.05 – 0.5 mm (0.002 – 0.020 in.) - Plate size max.: 800 × 1080 mm (31.50 × 42.50 in.) - Plate thickness: 0.25 – 0.5 mm (0.010 – 0.020 in.) - Speed max.: 4,000 sheets/h - Floor space requirement (incl. access to feeder, delivery, and central control desk): 950 × 525 cm (374 × 206.69 in.) - Press height: 230 cm (90.55 in.) Gusdeuf Sy Ajpfx Af Toa - Weight (including paper stacked in feeder and delivery): approx. 18,000 kg (approx. 39,690 lbs) - Total power requirements: approx. 50 kW - Compressed air supply: 6 – 7 bar

Condition: good (used), Year of construction: 1989, 2-color "straight" offset machine with low-stack explanation; 48x66cm, last modified type of this model (= best) Gedpfx Ajtyqhqjf Teua

Condition: ready for operation (used), Year of construction: 1987, functionality: fully functional, 4 spindle speeds: 3000/4500/6000/9000 rpm. Right-/left-hand rotation Control panel on top Gujdpfx Ajxwxrqjf Toa Table extensions and pull-out table support Motor 4.7/5.7 kW Spindle diameter 30 mm Weight approx. 1000 kg With feed unit WEGOMA VS 34, 3 rollers Tenoning table for cross machining

Condition: used, mileage: 670,110 km, power: 132 kW (179.47 HP), first registration: 09/2008, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro4, loading space length: 10,000 mm, loading space width: 2,450 mm, loading space height: 3,450 mm, Year of construction: 2008, Equipment: ABS, tail-lift, * Listing/Vehicle No.: MTG * Office: * WhatsApp: * Email: * Mobile: * Email: * Website: Rental of various trucks, tractor units, and trailers for short- or long-term rental. 7.5t from €699.00 and 18t from €1,000.00 per month – available at short notice! Contact us for details. 1x MAN TGL 8.180 L Box Truck Year of manufacture: 09-08 * Export model 09 * Chassis number: 9Y223XXX * Mileage: 670 km * Manual transmission * Euro 4 * BÄR tail lift 1.5t * Steel/air suspension * Cargo space length: 8.0 m / Interior height: 2.0 m / Interior width: 2.35 m * Cruise control * Multifunction steering wheel * Tyres: 265/70 R17.5 * Spare wheel * German vehicle * Top tyre condition Net price – trade-in possible – Rental/financing/leasing arrangement – Subject to changes, prior sale, typing errors and mistakes! We deal exclusively with well-maintained German vehicles. Guodpfsxvai Uox Af Tea Our services: all customs/export documents, Euro 1 * Temporary plates / 5 days * Customs plates / 30 days * Vehicle delivery * Vehicle collection * Main inspection and safety check Our contact details and business hours: * Office: * WhatsApp: * Mobile: * Email: * Website: * Monday - Friday: 09:00h - 18:00h * Saturday: by appointment

Condition: good (used), Year of construction: 2010, operating hours: 100,000 h, pressure (min.): 10 bar, pressure (max.): 10 bar, type of cooling: water, Equipment: documentation/manual, refrigerant dryer, type plate available, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, sound-insulated, integrated refrigerant dryer (WorkPlace Air System™). Technical specifications Reference conditions: intake pressure 1 bar Intake temperature 20 °C Relative humidity 0 % Usable volumetric flow at the outlet of the compact unit Gujdpfeu Rptyjx Af Tea at operating overpressure 9.75 bar 49.4 l/s 2.96 m3/min according to ISO 1217-3, C Motor rated power 18 kW Motor rated speed 4867 min-1 Shaft power requirement at maximum operating overpressure 24 kW Shaft power requirement at idle 5.6 kW Compressed air temperature after dryer 23 °C Cooling air volume 0.23 m³/s Oil fill quantity 12.2 l Residual oil content under reference conditions