Electric 4-wheel forklift

Kalmar ECG 140-6 - 442 Stunden !!!!

Condition: used, Year of construction: 1982, Technical details: faceplate diameter: 2600 mm turning diameter over support: 2500 mm turning length: - mm centre distance: 1600 mm turning diameter over bed: 2900 mm spindle bore: 100 mm revolution per minute: gear steps U/min feed range: Überdrehen 0,12-31,5 Plandrehen 0,12-45 mm/min bed guideways length: 2900 mm max. workpiece weight between centres: 400.000 kgs total power requirement: 45 kW weight of the machine ca.: alle Komponenten zusammen: ca. 29,0 t machine dimensions LxWxH: 5.2 x 5,0 x 3,1 m 3-way measuring system with digital display RSF electronics Control panel Cooling unit for Rittal electric cabinet Pgjdpfx Aswtctyjazjt *

Condition: used, Year of construction: 2017, Two RE2 Facelift wood gasifiers, in operational condition, are available. They have already been dismantled and are ready for collection in my warehouse. Pgjdpfsxuqpvox Aazet

Condition: excellent (used), Year of construction: 2009, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 2,350 mm, feed rate X-axis: 13,000 m/min, feed rate Y-axis: 13,000 m/min, feed rate Z-axis: 13,000 m/min, total length: 12,000 mm, total height: 4,800 mm, table width: 2,000 mm, total width: 6,800 mm, table length: 2,500 mm, drilling capacity: 180 mm, rotational speed (min.): 2,000 rpm, feed length W-axis: 1,000 mm, Coolant true spindel 20 Bar Paper filtration system ATC Tool changer 60 Positions  Spindel extension L = 550 mm Full B-Axis 360.000 with ROD880C Table load 28.000 Kg X - Travel: 5000mm Y - Travel: 3500mm Z - Travel: 2350mm W - Travel: 1000mm Table Length: 2500mm Table Width: 2000mm Table load: 28000 Speeds / ranges: 2000Rpm Power: 51kW Spindle Taper: 180 ISO50ISO/Bt/Mk Feed rate X-Axis: 13000mm/min. Pjdey Hq Dyepfx Aazsgt Feed rate Y-Axis: 13000mm/min. Feed rate Z-Axis: 13000mm/min. Feed rate W-Axis: 13000mm/min. ATC Toolchanger: 60 Coolant through spindle / Bar:20 Number of controlled axis: 5 Length: 12000mm Width: 6800mm Height: 4800mm Weight: 44000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Three Knife Trimmer with automatic infeed belt for Inline or Offline production Dreimesserautomat / Three Knife Trimmer Wohlenberg 44 FM 50 Baujahr / Year 1988 - Serial-No. 3296-013 Format / Size max.  315 x 440mm  Thicknes max. 100mm Speed max. 3000 cycles per hour Automatischer Einlauf / Specification automatic feeding Pjdpox Swm Ejfx Aazogt Bandauslage / Belt delivery Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test

Year of construction: 1993, condition: ready for operation (used), Two fully functional Schmiedl column-mounted slewing cranes are available. 1) Schmiedl crane type 3, year of construction: 1993, load capacity: 1000kg, radius: 5000mm. 2) Schmiedl crane type 3, year of manufacture: 1992, load capacity: 1000kg, radius: 7000mm. On-site inspection is possible. Pgodpfxjwkuz Rj Aazjt

Condition: ready for operation (used), functionality: fully functional, LINDNER wood chipper for sawmill offcuts, model T 400/140-2 – after technical inspection – in very good condition – suitable for producing technological wood chips TECHNICAL SPECIFICATIONS: infeed width: 400 mm infeed height: 140 mm rotor diameter: 450 mm rotor length: 400 mm main motor power: 33 kW infeed motors power: 2 x 1.5 kW Pgodor Ak Rgspfx Aazjt number of knives: 2 pieces screen dimensions: 60 mm x 90 mm infeed rollers in very good condition feeder motor power: 1.5 kW feeder length: 4,200 mm transport dimensions (L/W/H): 430 / 240 / 150 cm weight: approx. 2,000 kg

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 550 h, machine/vehicle number: 99, 🚀 GEDA 500 Z – OKOMITA GRAĐEVINSKA DIZALICA NA ZUBASTU LETVU Rabljena, 2015. godina – potpuno servisirana u GEDA Njemačka Jamstvo: 12 mjeseci 🏗️ POUZDAN NJEMAČKI STROJ – SPREMAN ZA RAD GEDA 500 Z je profesionalna okomita građevinska dizalica za materijal, idealna za podizanje teških i glomaznih tereta. Zahvaljujući robusnoj GEDA konstrukciji i jednostavnom održavanju, ovaj model se godinama pokazuje kao jedna od najpouzdanijih dizalica u industriji. Dizalica je servisirana direktno u GEDA Njemačka, potpuno obnovljena i isporučuje se s jamstvom od 12 mjeseci. Pgsdpfxsxvygas Aazjt ⚙️ TEHNIČKE SPECIFIKACIJE Proizvođač: GEDA (Njemačka) Model: 500 Z Godina proizvodnje: 2016. Pogon: 5,5 kW / 400 V / 50 Hz Visina dizanja (max): 100 m Nosivost: 500 kg Brzina dizanja: 30 m/min Dimenzije platforme: 1,4 × 1,6 m Mast sistem: GEDA UNI-X-MAST OPTIČKO STANJE: ODLIČNO - PUNO NOVIH DJELOVA TEHNIČKO STANJE: ODLIČNO - SVAKA DIZALICA POSJEDUJE KONTROLNI LIST PROIZVOĐAČA GEDA DA JE DIZALICA POTPUNO ISPRAVNA 🧰 PRIBOR ZA VISINU DIZANJA DO 20 m Elektromotor s košarom Kabel za visinu dizanja do 50 m – 1 kom ČELIČNI STUP 1,5 m sa zupčastom letvom – 13 kom Učvršćenje za stup – 4 kom Vodilica za kabel – 3 kom Kompletno servisirano, spremno za rad 💡 DODATNE INFORMACIJE ✅ Dizalice servisirane i testirane u Njemačkoj ✅ Jamstvo 12 mjeseci od dana kupnje ✅ GEDA certifikat i dokumentacija proizvođača ✅ Platforma se zakreće za 90° radi lakšeg utovara i istovara ✅ Transportni sustav na jednoj osi dostupan u dodatnoj opremi ✅ Upute dostupne na hrvatskom, njemačkom i engleskom jeziku 🆕 NUDIMO I NOVE GEDA DIZALICE I KOMPLETNU OPREMU Uz rabljene, u ponudi imamo i nove GEDA dizalice i liftove svih tipova: Okomite i kose građevinske dizalice Platforme za materijal i osoblje Pribor i dodatke za sve GEDA modele Sve nove i rabljene, obnovljene GEDA dizalice dolaze s punim jamstvom, certifikatom proizvođača i mogućnošću isporuke odmah. PRVA RUKA – GENERALNI ZASTUPNIK GEDA DIZALICA ZA HRVATSKU VEĆ VIŠE OD 30 GODINA. Specijalizirani za prodaju, najam, servis GEDA liftova, dizalica i kompletne opreme.

Year of construction: 1980, condition: good (used), strip width: max. 1.650 strip thickness: max. 3 mm Pgjdpfjd Ha Hmsx Aazot blade shaft Ø: 165 mm speed: max. 150 m/min

Condition: used, Technical details: spindle diameter: 120 mm x-travel: 1250 mm y-travel: 1250 mm z-travel: 800 mm W-axis (spindle longitudinal): 600 mm Speed of boring spindles: 1- 2000 U/min. spindle taper ISO: 50 table surface area: 1000 x 1000 mm total power requirement: 55 kW weight of the machine ca.: 18 t with CNC HEIDENHAIN TNC 426 autom. toolchnager 40-pockets coolant attachment * Pgodpjxt El Asfx Aazst

Condition: refurbished (used), Year of construction: 2006, 3/4-automatic screen printing machine THIEME 3010 special model Printing format 55 x 75 cm, screen frame format 100 x 110 cm, parallel lifting machine with extendable vacuum table plate, special version with gripper system, rear delivery, suitable for channel with long infeed or for cross-positioning at a drying channel. The rear part of the gripper extends the machine by 170 cm at the back. Electromechanical machine with pneumatic squeegee pressure control, separate control panel, can be operated from the left or right side, complete with 3 sets of printing and flood squeegees, used, model year 2006, fully refurbished and repainted, in good technical and visual condition. Pgsdpfxjr Izhue Aazot