Storage lift

Kardex/Megamat 2006/452/32

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm Todpfx Ajd Spf Redlsf 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: reconditioned (used), Modernized machines with the new LTG StoreControl L control system External dimensions: Height 6,000 mm Width 1,630 mm Tsdpfxsn D A Rrs Adlsf Depth 2,980 mm 30 beams, each with a payload of 500 kg with the clear usable dimensions: W = 1,300 mm D = 863 mm H from 50 to 750 mm Total payload up to 40,000 kg Start of the access opening at 870 mm above the top floor, then 845 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surface cleaned, signs of wear possible Performance values Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.29 kW / 400 volts More Extras: Hand-operated lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently primarily in Germany, Austria, and other neighboring countries.

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for log splitter, crane, mini excavator, tractor, viticulture, horticulture and many other applications. With the hydraulic attached winch, you can facilitate many applications: - Pulling firewood to the log splitter and setting it up - Pull logs onto trailers - Pull out rootstocks and trees - As a winch for backhoes and small excavators - As winch for small tractors and narrow track tractors A sturdy steel construction with 3-sided mounting options (left, right, rear) with 12 threaded holes, this offers many possibilities for mounting the winch (threads are cut and painted.) The winch can also be used as a power winch. They need to be re-tapped with the tap before use because of the rust protection). A 20 m long and 6 mm thick steel cable is mounted. Large pulley for long life of the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc). Depending on what speed and traction you need. Maximum working pressure: 225 bar peak Continuous working pressure: 175 bar Displacement: 400 ccm Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum tractive force: 1700 kg Todpsdf Ufpsfx Adlef Weight: 49 kg Rope speed: 47 m/min at 60 L/min hydraulic oil Color: red Dimensions: length: 500 mm length with pendulum: 570 mm Width front: 120 mm Width rear: 180 mm Width bearing: + 30 mm Width motor: + 200 mm Height: 250 mm The winch is available for mounting or for welding on

Year of construction: 1985, condition: good (used), machine/vehicle number: 04.2187, Hydraulic indoor broaching machine in technically good condition Manufacturer: Arthur Klink Year of manufacture: 1985 reconditioned Weight: 2t Model: RIW 10 x 1200 x 400 Machine No: 04.2187 Tractive force: 10.000kg at 3m/min clearing speed: hydraulically stepless adjustable from 1m/min to 7m/min return speed: hydraulically stepless adjustable from 7m/min to 30m/min Tsdpfx Adeixntwelef maximum stroke: 1200mm Broaching tool clamping: universal drawing head for flat shanks up to 26mm width maximum workpiece diameter: Ø max. 480mm (due to oil and chip tray) table opening: Ø 70mm power supply: 380 Volt / 50 Hz / 5kW

Condition: not inspected (used), Year of construction: 1981, functionality: unexamined, machine/vehicle number: 3124, Trimming saw Esterer DKV-5S year of construction 1981 55 KW saw motor Todpjuy Ib Ijfx Adljf with ASV/B pull-out system year of construction 1981

Condition: reconditioned (used), Modernized machine with new LTG StoreControl L control system External dimensions: Height 9,500 mm Width 2,200 mm Depth 2,700 mm 58 beams, each with a payload of 190 kg with clear usable dimensions: W = 1,850 mm D = 825 mm H from 0 to 750 mm Total payload up to 20,000 kg Todpfxodnlkhs Adlef Start of the access opening 900 mm above the top floor, then 850 mm high Color: GRAY/BLUE, beams sendzimier-galvanized Surfaces cleaned, signs of wear possible Performance data Vertical drive 1 x 2.2 kW / 400 volts Horizontal drive 1 x 0.25 kW / 400 volts More Extras: Manual lift door Subject to errors, technical changes, and deviations from photos. Delivery and installation currently mainly in Germany, Austria, and several neighboring countries.

Condition: new, Year of construction: 2025, Technical data Swing over bed 360 mm Swing over cross slide 150 mm Maximum turning length 750 mm Spindle speed 100–2000 rpm Spindle bore Ø 47 mm Spindle taper A2-6 Tailstock spindle taper MT5 Number of tools in the holder 8 Tools size 20×20 Tailstock spindle feed 100 mm Main motor power 3.7 kW Dimensions 1815×1300×1600 mm Weight 1300 kg Available equipment Tedof Ey Umspfx Adlof SINUMERIK 808D control system in Polish and English SIEMENS servomotors 3-jaw hydraulic chuck 8-position turret head soft jaw kit hydraulic tailstock cooling system automatic gear and guide lubrication system 24V halogen lighting Polish and English manuals EC declaration The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: used, Technical details: welding current: 520 A Length: 1200 mm height: 1100 mm weight of the machine approx.: 147 kg dimensions L x W x H: 1,2 x 0,75 x1,1 m Welding process TIG/E/MIG-MAG Tsdpfx Aswc R Udedlof Delivery consists of: Welding transformer, feed unit, cooling unit Protection class IP23C Insulation class B/H *

Condition: excellent (used), functionality: fully functional, machine/vehicle number: XP2000, total height: 7,550 mm, total width: 2,780 mm, total length: 3,070 mm, load capacity per storage section: 500 kg, construction height: 7,600 mm, type of input current: three-phase, input voltage: 415 V, empty load weight: 500 kg, warranty duration: 12 months, load capacity: 20,000 kg, Equipment: documentation/manual, safety light barrier, Kardex shuttle 500 XP2000 415v Colour Blue & Grey Max load per tray 500Kg Number of Trays 40 Total machine load 20,000 Kg Tray Dimensions width - 2450mm x 864mm depth Machine Dimensions 7550mm x 2780mm x 3074mm Todpfx Ajrgqw Eodlef These machines are modula and can be reduced in Height to fit any facility Full installation service available with 12 months warranty Supply only without warranty Service & Maintenance available after installation if required

Year of construction: 1955, condition: used, machine/vehicle number: 1331, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1955 Weight: approx. 2950 KG Machine. No.: 1331 General / technical data: Tsdpfx Adjdbr H Tjlef hydraulic horizontal internal broaching machine in a good working condition clearing length: 1500mm turning: 1 piece pulling force: 10000 KG at 3m/min (5000KG at 7m/min) Clamping tool: universal pulling head for flats up to 26mm width Through hole in clamping table: Ø 100mm Workpiece diameter: max. 420mm (due to the oil and oil sump) cutting speed: hydraulically infinitely variable from 1m/min to 7m/min Return speed: hydraulically infinitely variable from 7m/min to 25m/min Dimensions of the machine: (w x d x h) approx. 6200mm x 700mm x 1900mm (without working area) Power supply / connected load: 380Volt 50 HZ / 8 KW hydraulic motor: 7,5 KW Accessories / special equipment: - the machine is equipped with a universal drawing head for flat sheets - the machine has a movable coolant cutting unit for 2 media - the machine has an oil and oil tank with a tool feeder slide Remarks: The machine is ideal for the production of keyways and profiles. The machine runs smoothly and is very clean in the area of the guides and the cylinder. Broaches and mandrels can be supplied on request. The machine is ready for inspection under power in our warehouse.